3 Get started
Always follow the instructions in this chapter in
sequence.
Connect power
Caution
Risk of product damage! Make sure that the power
voltage corresponds to the voltage printed on the back
or underside of the clock radio.
Risk of electric shock! When you unplug the power
adapter, always pull the plug from the socket. Never
pull the cord.
Use the supplied power adapter only.
Note
The type plate is located at the bottom of the clock
radio.
DC IN
Turn on
Press
.
» The clock radio switches to the last
selected source.
EN
4
Switch to standby mode
Press
again to switch the clock radio to
standby mode.
»
Set time
Note
You can only set time in standby mode.
TIME SET
TUNING
Note
When an iPod/iPhone is connected, the clock radio
synchronizes time with the iPod/iPhone automatically.
The accuracy of the transmitted time depends on the
docked iPod/iPhone that transmits the time signal.
Select a source
Press SOURCE repeatedly to select a source:
FM tuner, iPod/iPhone, or MP3 Link.
Note
When an iPod/iPhone is docked, the clock radio
switches to iPod/iPhone mode automatically.
TIME SET
2 sec.
TUNING
TIME SET