Table of Contents
Advertisement
10 Factory Setting
10.1. How To Turn On The Factory Settings?
1. Set the mode switch "Motion Picture Recording" mode.
2. While the power is turned OFF, keep pressing the "MENU" button, "Zoom lever" to W side and "FOCUS A/M/
more than 3 seconds until the top screen of the Service Mode Menu being displayed.
3. Touch the [ 1 ] of LCD.
4. Touch the [ YES ] of LCD.
5. After few seconds "END" is displayed or "ESD NODATA" as "NG" is displayed on LCD monitor. Cutting of battery connection
or AC power supply connection as a completion of the "FACTORY SETTINGS".
(After use at least once, even if the physical format of the build-in memory will be performed, "ESD NODATA" as "NG" is indi-
cated, but "FACTORY SETTINGS" is completed.)
49
" button for
Advertisement
Table of Contents
