Table of Contents
Advertisement
7.2.
Check
7.2.1.
The check of a Convergence Gap
1. Check by 2DTV (HDMI Connection).
2. Record a chart in a zoom W side and a macro mode (MACR set up with the USER button).
3. Check each distance X when the distance between a chart and a main unit is changed and the vertical bar of a right-and-left
picture is coincided on TV screen (or LCD screen).
4. When distance X is different from the following spec.
zoom W side : X=1.4m±30cm
macro mode (zoom W side) : X=45cm±3cm
7.2.2.
The check of a Right-and-Left Height Gap
1. Check by 2DTV (HDMI Connection).
2. Measure in each distance in a zoom T side(×10) and a macro mode (zoom W side).
zoom T side : X=1.4m±30cm
macro mode (zoom W side) : X=45cm±3cm
3. Check the amount of height gaps of the horizontal line of a right-and-left picture on TV screen.
When TV screen height has 0.8% or more of the amount of height gaps
exchange.
The lens unit exchange.
23
The lens unit
Advertisement
Table of Contents
