Lan - Panasonic CF-07 Series Reference Manual

LAN

<Only when the port replicator is connected>
Connecting LAN
LAN port
When using the computer as a network computer, some additional settings may
have to be made depending on the usage conditions. We recommend asking your
system administrator or the person in charge of the network.
1
Power off your computer
Do not shut down using the standby or hibernation function.
2
Connect the cable
Connect the LAN port and the network system (server, HUB, etc.) using a LAN
cable.
CAUTION
Do not use the standby or hibernation functions during communications (except
when the Wake up from LAN function is in use), as this may cause an error in
data transmission or reception. The timeout function may engage even during
data transmissions, causing the computer to automatically go into standby or
hibernation mode. When not using the Wake up from LAN function, we recom-
mend disabling the timeout function using the following procedure.
[Control Panel] - [Performance and Maintenance] - [Power Options] - [Power
Schemes]
NOTE
If you are unable to connect to the network (when the indicator of your HUB unit
does not light):
1 Select [Device Manager] in [Start] - [Control Panel] - [Performance and Main-
tenance] - [System] - [Hardware].
2 Select the network adaptor name you are using from [Network adapters].
3 Select [Advanced].
4 Confirm the settings of each item.
"
( Starting Up/Shutting Down
26
"
)