Points To Bear In Mind - Lennox CMC 020S Installation, Operating And Maintenance Manual

POINTS TO BEAR IN MIND

DANGER AND WARNING SIGNS
Abrasive
surfaces
ELECTRICAL CONNECTIONS
Make sure to switch off the power before installing, repairing or carrying out maintenance on the unit,
in order to prevent serious electrical injury.
Keep local and national legislation in mind when installing the unit.
Standard Guidelines to Lennox equipment
All technical data contained in these operating instructions, including the diagrams and technical description remains
the property of Lennox and may not be used (except for the purpose of familiarizing the user with the equipment),
reproduced, photocopied, transferred or transmitted to third parties without prior written authorization from Lennox.
The data published in the operating instructions is based on the latest information available. We reserve the right to
make modifi cations without notice.
We reserve the right to modify our products without notice without obligation to modify previously supplied goods.
These operating instructions contain useful and important information for the smooth operation and maintenance of
your equipment.
The instructions also include guidelines on how to avoid accidents and serious damage before commissioning the
equipment and during its operation and how to ensure smooth and fault-free operation. Read the operating instructions
carefully before starting the equipment, familiarize yourself with the equipment and handling of the installation and
carefully follow the instructions. It is very important to be properly trained in handling the equipment. These operating
instructions must be kept in a safe place near the equipment.
Like most equipment, the unit requires regular maintenance. This section concerns maintenance and management
personnel.
If you have any queries or would like to receive further information on any aspect relating to your equipment,
do not hesitate to contact us.
Low High
temperatures temperatures
Risk of injury by Electrical
moving objects
2
Risk of injury by
voltage rotating objects