Table of Contents
Advertisement
Technical Data
3.3
8 Input / 2 Output Expander
Operating voltage
1)
Current consumption
Number of on-board zones
EOL resistor
Number of on-board relays
2)
Field bus
Interfaces
Tamper contact
Operating temperature
Relative humidity
Housing protection
Colour
Housing protection class
Mounting
Housing material
Housing
Standards
1)
For EN compliance the supplied current needs to be supported by the battery for required stand by time
2)
Max. 400m between devices with cable types IYSTY 2 x 2 x Ø 0,6 mm (min.), UTP cat5 (solid core) or Belden 9829
16
Siemens Building Technologies
Fire Safety & Security Products
9.5 – 14 V DC
Min. 45 mA at 12 V DC
Max. 80 mA at 12 V DC
8
Dual 4K7 (default), other resistor combinations config.
2 single-pole changeover, 30 V DC / 1 A
(resistive switching current)
X-BUS on RS485 (307 kb/s)
X-BUS (In, Out, Branch)
On-board front cabinet spring tamper
5 - 40 °C
Max. 90 % (no condensation)
IP30
RAL 9003
Class II Indoor General
Surface, wall-mounted
ABS
Plastic enclosure
Designed to meet
EN50131-1:2006 (Grade 3),
TS50131-3:2003 (Grade 3)
09.2008
Advertisement
Table of Contents
