Reset - Philips WACS700 User Manual

Reset

Reset
If desired, you can restore your Center or
Stations to their default setting (including the
network setting).
When to reset Center or Station:
●
Resetting Center or Station helps to re-establish
the connection between Center and Station.
●
To change the way your Center connects to PC,
you need to reset the Center (see the Option 1,
Option 2 or Option 3 in manual Connect to
your PC)
1
Check the set is switched on (See Basic
functions)
2
Press MENU to enter the MENU screen
3
Use the navigation controls 3 or 4 and 2
to enter Settings
4
Use the navigation controls 3 or 4 and 2
to enter Restore settings
5
Press 3 or 4 and 2 to select Yes
➜
The set is rebooted. Language selection
screen appears
6
Select your desired language: English, French,
Spanish, Dutch, Italian and German
➜
The set enters Installation Mode
➜
The search for Center or Stations starts. The
Wi-Fi connection is being re-established
If the Center is reset and Stations are
not reset:
●
On the Stations, select AUX mode
and enter Installation Mode by:
a. Press MENU.
b. Use the navigation controls 3 or 4 and 2 to
select Installation Mode
➜
The Stations start to connect Center
44
If a Station is reset and the Center is
not:
●
On the Center, select HD mode and then, enter
Installation Mode by:
a. Press MENU
b. Use the navigation controls 3 or 4 and 2 to
enter Station Mgnt menu
c. In Station Mgnt menu, use the
navigation controls 3 or 4 and 2 to select
Add New Station
➜
Searching for Stations starts
If both Center and Stations are reset:
●
Do as you did in the first-time Wi-Fi connection
(see Installation, Set up Wi-Fi connection
between Center and Station)
7
On Center, press STOPÇto exit Installation
Mode when all the Stations are found