Reset - Philips WACS5 User Manual

Reset

Reset
If desired, you can restore your Center or Station
to their default setting (including the network
setting).
1
Check the set is switched on (See Basic
functions, Switching on/to standby and
selecting functions, Switching to Eco
power/ on)
2
On the remote control, press MENU to enter
the MENU screen (or on Center, press and
hold STOP • MENU)
3
Use the navigation controls 3 or 4 and 2
to enter Settings
4
Use the navigation controls 3 or 4 and 2
to enter Restore settings
5
Press 3 or 4 and 2 to select Yes
➜
The set is rebooted. Language selection
screen appears.
6
Select your desired language: English, French,
Spanish, Dutch, Italian and German
➜
The set enters Installation Mode.
➜
The search for Center or Stations starts. The
Wi-Fi connection is being re-established.
If the Center is reset and Stations are
not reset:
●
On the Stations, enter Installation Mode by:
a. Remove the Station's power plug and then,
connect it to the power supply again.
➜
"Connecting to Center" appears
b. Press MENU or STOP to enter the selection
screen of Installation Mode and Select
Server
c. Use the navigation controls 3 or 4 and 2 to
select Installation Mode
If a Station is reset and the Center is not:
●
On the Center, select HD mode and then, enter
Installation Mode by:
a. Press MENU.
b. Use the navigation controls 3 or 4 and 2 to
enter Station Mgnt menu
c. In Station Mgnt menu, use the
navigation controls 3 or 4 and 2 to select
Add New Station
➜
Searching for Stations starts.
WACS5_Eng/37
If both Center and Stations are reset:
●
Do as you did in the first-time Wi-Fi connection
(see Installation, Set up Wi-Fi connection
between Center and Station)
7
On Center, press STOPÇto exit Installation
Mode when all the Stations are found
Helpful hints:
– To change your network settings, you need to
reset your
Custom Installation).
41
C5 Center (see Connect your PC,
WA
8/3/2005, 15:13