Reset - Philips Streamium WACS7500 User Manual

15

Reset

You can restore
When to reset
• Reset or
• Reset or
network.
1 Check that the set is switched on (see 5 Basic functions).
2 Press MENU
3 4
3 Use or
2
4 Press to select Yes.
> The set is rebooted.
Language selection screen appears.
5 Select your desired language: English, Français, Español, Nederlands, Italiano or Deutsch.
> The set enters Installation Mode.
The search for
The Wi-Fi connection is being reestablished.
If the is reset and
1 On the , disconnect the power plug and connect them to the power supply again.
2 Connecting to Center appears.
3 On the remote control, press
3 4
4 Use or
5 start to connect to
If a is reset and
1 On , select HD mode.
2 Press MENU
3 4
3 Use or
3 4
4 Use or
> Searching for Stations starts.
If and
1 Select language and then enter Installation Mode.
STOP 9
2 Press
Tip
• Restoring to default settings does not delete any stored music tracks.
• After restoration to default settings, the network mode will return to ad-hoc mode.
Downloaded From Disc-Player.com Philips Manuals
82
or to the default settings (including network settings).
or :
to reestablish Wi-Fi connection between
to change the way
to enter the menu screen.
2
and to enter Settings followed by Restore settings.
or starts.
are not reset:
MENU
2
and to enter Installation Mode.
.
is not reset:
to enter the menu screen.
2
and to enter Station Management (Mgnt) menu.
2
and to select Add New Station.
are reset:
on when all
or connects to a Wi-Fi enabled / wired home
to enter menu screen.
are found.
and .
Reset