Removal Of Pcb - Daikin D-Series Service Manual

SiBE12-522
1.4 Removal of
Procedure
Step
1. Removing the controller
PCB
Release the tab of the
1
electrical box, and open
the terminal board.
Disconnect each
2
connector of the
terminal board.
Unscrew 1 screw and
3
release two tabs to
remove the PCB
Removal Procedure
PCB
Warning Be sure to wait 10 minutes or more after turning off all power supplies
before disassembling work.
Procedure
Outdoor Unit (80 / 90 Class)
Points
235