Table of Contents
Advertisement
Setting:
Description:
Values:
Setting:
Description:
Values:
Setting:
Description:
Values:
Setting:
Description:
Values:
Setting:
Description:
Values:
Setting:
Description:
Values:
Configuration File Parameter Guide
VCS752 Administrator and Provisioning Manual
provisioning.schedule_mode
Sets the type of schedule check for configuration and firmware files.
disable, interval, weekday Default:
provisioning.resync_time
Sets the interval (in minutes) between checks for new firmware and/or
configuration files.
0–65535
provisioning.weekdays
Sets the day(s) when the device checks for new firmware and/or
configuration files. Enter a comma-delimited list of weekdays from 0
(Sunday) to 6 (Saturday). For example, 5,6,0 means the provisioning
check will be performed on Friday, Saturday and Sunday.
0–6
provisioning.weekdays_start_hr
Sets the hour when the device checks for new firmware and/or
configuration files.
0–23
provisioning.weekdays_end_hr
Sets the hour when the device stops checking for new firmware and/or
configuration files.
0–23
provisioning.remote_check_sync_enable
Enables or disables remotely triggering the device to check for new firmware
and/or configuration files. The file checking is triggered remotely via a SIP
Notify message from the server containing the check-sync event.
0 (disabled), 1 (enabled)
112
disable
Default:
0 (OFF)
Default:
Blank
Default:
0
Default:
0
Default:
1
Back to Contents
Hide quick links:
Advertisement
Table of Contents
