Index - Siemens FDOOTC241 Technical Manual

9

Index

A
Alarm indicator
Indication of operating condition, 29
Ambient supervision, 17
Application as heat detector
Sensor mode 1, 25
Application as neural fire detector
Sensor mode 0, 25
Application as smoke detector
Sensor mode 2, 25
ASAtechnology
S-LINE, 18
C
Carbon monoxide
CO, 17
CO
Carbon monoxide, 17
CO concentration, 22, 25, 55
Average, 55
CO sensor
Detection of carbon monoxide, 23
Compatibility, 33
Control panel, 73
D
Danger level
Signal processing of the detector, 26
Default parameter set 0
Delivery, 46
Degraded mode operation
Failure of fire control panel, 31
Delivery
Default parameter set 0, 46
Detection behavior of the detector
Building Technologies
Fire Safety & Security Products
Parameter set, 25, 26
Detection of carbon monoxide
CO sensor, 23
Detector base FDB221
Surface-mounted or recess-mounted feed line,
58
Detector base FDB222
Recess-mounted feed line, 59
Detector exchanger and tester
Test device, 30
Detector exchanger and tester FDUD292
MC link, 32, 74
Diagnosis levels
Information displayed on the detector exchanger
and tester, 28
F
Failure of fire control panel
Degraded mode operation, 31
H
Hot air fan
Test device, 30
Hysteresis, 22, 25
Hysteresis range, 25, 53, 55
I
Indication of operating condition
Alarm indicator, 29
Information displayed on the detector exchanger
and tester
Diagnosis levels, 28
Intelligent detector tester FDUD293
MC link, 32, 74
Interface
MC link, 74
Index
81
A6V10209291_f_en_--
05.02.2010