Clock/Timer; View Clock; Clock Setting; Timer Setting - Philips FW-M355 Manual

DIGITAL SOUND DISPLAY
STANDBY-ON
DSC
ECO POWER
CD
OPEN/
CLOSE
DISC
CHANGE
IMPORTANT!
When in Eco Power standby mode, it is not
possible to operate the clock or timer
function.

View clock

The clock (if it is set) will be shown in standby
mode.
To view the clock in any source mode
(CD or TUNER for example)
Press CLOCK•TIMER.
The clock is displayed for a few seconds.
If the clock has not been set, "--:--" is
displayed.

Clock setting

The clock can be set in either 12-hour or
24-hour mode ("12:00
example)
1
In standby or view clock mode, press
CLOCK•TIMER once. In other source mode,
press CLOCK•TIMER twice.
2
Press PROG repeatedly to select clock mode.
"12:00 " or "00:00" starts flashing.
AM
3
Press à or á on the system repeatedly to set
the hour.
4 Press í or ë on the system repeatedly to set
the minute.
5
Press CLOCK•TIMER again to store the
setting.
The clock starts working.
pg 001-030/M355/22-Eng
BAND TAPE 1 • 2 VIDEO
TUNER TAPE AUX
MP3-CD
SEARCH •TUNING PLAY• PAUSE SEARCH •TUNING
ALBUM- ALBUM+
MP3-CD
TITLE- TITLE+
PREV/ PRESET STOP•CLEAR / DEMO STOP NEXT/ PRESET
RDS NEWS A. REPLAY RECORD PROG CLOCK•TIMER DIM
" or "00:00", for
AM
1
25

Clock/Timer

MASTER VOLUME
To exit without storing the setting
Press Çon the system.
Notes:
– The clock setting will be cancelled when the
power cord is disconnected or if a power failure
occurs.
– During clock setting, if no button is pressed
within 90 seconds, the system will exit clock setting
mode automatically.
– To set the clock automatically through the time
information in the RDS signal, refer to "Radio
Reception - Setting the RDS clock".

Timer setting

The system can switch on to CD, TUNER, or
TAPE mode automatically at a preset time,
serving as an alarm to wake you up.
IMPORTANT!
– Before setting the timer, ensure that the
clock is set correctly.
– The timer will always be switched on
after it has been set.
– The timer will not start if a recording is in
progress.
– The volume of the timer will increase
gradually from the minimum level to the
last tuned volume level.
Press and hold CLOCK•TIMER for more than
two seconds to select timer mode.
"12:00 " or "00:00" or the last timer
AM
setting starts flashing.
starts flashing.
4/17/02, 10:37 AM
MUTE 2
CD 1/2/3 AUX TUNER TAPE 1/2
1 2 3
4 5 6
8 9
7
0
PROG SLEEP
VOLUME
É Å
í ë
Ç
à á
DIM
DBB DSC
25
3139 115 21422