Selecting a desired track/passage
To search for a particular passage during
playback
1
Press à or á until the desired passage is
located.
2
Press É Å to resume normal playback.
To select a desired track
Press í or ë repeatedly (or numeric keys
0-9 on the remote control) until the desired
track is displayed.
If playback is stopped, pressÉ Å to start
playback.
Selecting a desired Album/Title
(MP3 disc only)
To select a desired album
Press ALBUM -/+ (à or á) repeatedly.
starts flashing and the album's name will
ALB
scroll through the display once.
To select a desired title
Press TITLE -/+ repeatedly (í / ë or
numeric keys 0-9).
starts flashing and the title's name will
TITLE
scroll through the display once.
Note:
– The album and title will only be displayed once
when selected. To view again, press the respective
DISPLAY button on the remote control.
pg 001-030/M355/22-Eng
CD/MP3-CD Operations
Repeat play
You can select and change the various play
modes before or during playback.
1
Press REPEAT on the remote control
repeatedly to select :
"TRACK" – to repeat playback of the current
track.
"DISC" – to repeat playback of the current
disc.
"PROGRAM" – to repeat playback of the
programmed tracks.
2
To resume normal playback, press REPEAT
until "REPEAT OFF" is displayed.
REP
Notes:
– During programme play mode, it is not possible
to repeat playback the current disc (Repeat Disc
mode).
– Pressing the Ç button will cancel all repeat
modes.
Programming the disc tracks
Programming tracks is possible when playback is
stopped. Up to 99 tracks can be stored in the
memory in any order.
1
Load the desired discs on the disc tray (refer to
"Loading discs").
2
Press CD 1/2/3 to select a disc.
3
Press PROG to start programming.
PROG
4
Press í or ë repeatedly (or numeric keys
0-9 on the remote control) to select the desired
track.
For MP3 disc, press ALBUM -/+ and
TITLE -/+ to select the desired album and
title for programming.
17
is shown, except for REPEAT OFF mode.
starts flashing.
3139 115 21422
4/17/02, 10:36 AM
17