Figure 8-28. Assemble The Secondary Shield Assembly; Figure 8-29. Torque In The Chassis Screws - Motorola APX 1000 Basic Service Manual

Disassembly/Reassembly Procedures: Radio Reassembly
8.6.2 Reassemble the Secondary Shield Assembly (32)
1. With the Main Board (33) assembled, place the Secondary Shield Assembly (32) onto the
Main Board.
2. Torque all seven Chassis Screws (30) with a Torx IP6 Bit and a Torque Driver to 3.0 in-lbf in
the sequence as shown in
Secondary
Shield's
Dimples

Figure 8-28. Assemble the Secondary Shield Assembly

Figure 8-29.

Figure 8-29. Torque in the Chassis Screws

3
6
5
1
8-21
2
7
4