Figure 8-18. Unplug The Front Kit Flex And Back Kit Flex Connectors; Figure 8-19. Remove The Keypad Board - Motorola APX 1000 Basic Service Manual

Disassembly/Reassembly Procedures: Radio Disassembly
8.4.5.6 Removal of the Keypad Board (27)
1. With the Keypad Retainer (28) removed, gently unplug the connectors of the Front Kit flex (2)
and Back Kit Flex (31) to remove the Keypad Board (27) as shown in
!
a u t i o n

Figure 8-18. Unplug the Front Kit Flex and Back Kit Flex Connectors

2. With the connectors unplugged, gently lift the Keypad Board (27) out of the Front Housing
(16) with the aid of the black stick as shown in
!
a u t i o n
When separating the flex and small interconnects, care is
needed to avoid damage to the interconnect and surrounding
on-board components
Front Kit Flex Connector
When lifting the Keypad Board with the black stick, care is
needed to avoid piercing and damage to the Keypad.

Figure 8-19. Remove the Keypad Board

Back Kit Flex Connectors
Figure 8-18.
8-13
Figure 8-18.