BATK12S01 Series 1.2L Automatic Tea Kettle Customer Service (North America): 1-888-538-8683 Local (Wyoming, USA): 307-222-6086 Email: help@mybrewista.com READ THIS MANUAL PRIOR TO FIRST USE AND SAVE FOR FUTURE REFERENCE Household Use Only 1-year Limited Warranty...
IMPORTANT SAFEGUARDS When using electrical appliances, basic safety precautions should always be followed including the following: • Read all instructions. • Do not touch hot surfaces. Use handles or knobs. • To protect against fire, electric shock and injury to persons, do not immerse cord, plugs, base or kettle in water or other liquid.
ADDITIONAL SAFEGUARDS DO NOT OPERATE APPLIANCE IF THE LINE CORD SHOWS ANY DAMAGE OR IF APPLIANCE WORKS INTERMITTENTLY OR STOPS WORKING ENTIRELY. EXTENSION CORDS A short power-supply cord is to be provided to reduce the risk resulting from becoming entangled in or tripping over a longer cord. Longer detachable power-supply cords or extension cords are available and may be used if care is exercised in their use.
Features • Auto-start function heats your water to your chosen temperature at your selected time • Displays kettle temperature in Fahrenheit or Celsius • Displays actual water temperature in kettle even when powered off • Allows user to hold temperature at 160 °F for up to one hour •...
OPERATION INSTRUCTIONS Note: Before plugging the kettle into the wall outlet, check that the electrical circuit is not overloaded with other appliances. ❶ Setting Up the Kettle: • Set the base (7) on a flat, steady surface. • Remove the kettle from the base (7). •...
◦ Press the [ + ] button once to increase the hour by one until the desired hour is reached. • Press the [ - ] button (11) to change the minutes. ◦ Press the button once to increase by one minute. ◦...
• Manually Setting the Desired Temperature: ◦ Press the TEMPERATURE SETTING button (12); the last set temperature will flash on the display. ◦ Press the [ + ] button (10) or [ - ] button (11) to select the desired temperature.
• The kettle will display the water temperature for up to 1 hour in the LCD if the kettle is not removed from the base. • After brewing, if the temperature is over 160 °F (71 °C) and the kettle is off, you can press the PUMP button (16) once to pump water using your last pump time setting.
• Press the PROG button (14) again before the program starts to cancel the Auto-start function. • If the kettle is removed from the base while in program mode, the PROG button (14) and the KEEP WARM button (13) must be pressed again once the kettle is returned to the base to resume these functions.
When mineral scale builds up in the kettle, it can affect temperature consistency and slow down heating time. • To ensure optimum performance, Brewista recommends descaling the kettle when mineral build-up is visible inside the kettle. Note: Vinegar may not effectively descale the kettle and can be difficult to thoroughly rinse.
High Altitude Users At higher elevations water boils at lower temperatures. Use the graph below to determine your kettle’s boiling temperature. WARNING: The appliance is very hot during use. Do not touch the surface of the kettle. Danger of burns! WARNING: Never leave the kettle unattended while boiling water, especially if there are children nearby.
LIMITED WARRANTY 1-Year Limited Warranty from the date of original purchase. 1. This warranty extends only to the original consumer, purchaser, or gift recipient. Keep the original sales receipt, as proof of purchase is required to make a warranty claim. The product must be purchased at an authorized retailer for the warranty to be valid.
Page 16
BATK12S01 Series 1133 W. 27th Street, Cheyenne, WY 82001, USA www.mybrewista.com Toll Free in North America: 888-538-8683 Local: 307-222-6086...