Earpiece Controls - Plantronics 975 User Manual

Turn on the Press and hold the call control button for 2 seconds until
earpiece the indicator glows white. If earpiece flashes red 3 times
when you turn on the earpiece then the battery is very low
and should be recharged.
note
is off. To confirm that your earpiece is on, press any button.
You should see a
Turn off the Press and hold the call control button for 4 seconds until
earpiece the indicator glows red. When power is off, indicator
stays off.
note
tones when the power turns on and descending tones when
the power turns off.
Answer or When your earpiece rings, tap the power button once;
reject a call you should hear 1 low tone.
To reject a call and send the caller to voice mail, press the
call control button for 1 second.
note
Wait until you hear the ring in your earpiece to press the call
control button and answer the call.
End a call While on a call, tap the call control button.
Make a call When the earpiece is paired to your phone and in range,
enter phone number on your phone and press send. The
call automatically transfers to your earpiece.
Transfer a While on a call, press and hold the call control button for
call between 2 seconds. You will hear a single low tone followed by a
earpiece and double low tone. The call will then be transferred to the
phone phone.
DURATION: TAP is under 1 second. PRESS is 1-4 seconds as directed.
When your earpiece is in standby mode, the indicator
white light flash.
If you're wearing the earpiece, you hear ascending
Your phone may ring before your earpiece rings.

earpiece Controls

9