Configuring Dhcp Snooping; Overview; Application Of Trusted And Untrusted Ports - HP 6125XLG Layer 3-Ip Services Configuration Manual

Configuring DHCP snooping

DHCP snooping works between the DHCP client and server, or between the DHCP client and DHCP
relay agent. It guarantees that DHCP clients obtain IP addresses from authorized DHCP servers. Also, it
records IP-to-MAC bindings of DHCP clients (called DHCP snooping entries) for security purposes.
DHCP snooping does not work between the DHCP server and DHCP relay agent.

Overview

DHCP snooping defines trusted and untrusted ports to make sure clients obtain IP addresses only from
authorized DHCP servers.
Trusted—A trusted port can forward DHCP messages correctly to make sure the clients get IP
•
addresses from authorized DHCP servers.
Untrusted—An untrusted port discards received DHCP-ACK and DHCP-OFFER messages to prevent
•
unauthorized servers from assigning IP addresses.
DHCP snooping reads DHCP-ACK messages received from trusted ports and DHCP-REQUEST messages
to create DHCP snooping entries. A DHCP snooping entry includes the MAC and IP addresses of a client,
the port that connects to the DHCP client, and the VLAN.
The following features need to use DHCP snooping entries:
ARP detection—Uses DHCP snooping entries to filter ARP packets from unauthorized clients. For
•
more information, see Security Configuration Guide.
MAC-forced forwarding (MFF)—Auto-mode MFF intercepts ARP requests from clients, uses DHCP
•
snooping entries to find the gateway address, and returns the gateway MAC address to the clients.
This feature forces the client to send all traffic to the gateway so that the gateway can monitor client
traffic to prevent malicious attacks among clients. For more information, see Security Configuration
Guide.
IP source guard—Uses DHCP snooping entries to filter illegal packets on a per-port basis. For more
•
information, see Security Configuration Guide.
• VLAN mapping—Uses DHCP snooping entries to replace service provider VLAN in packets with
customer VLAN before sending the packets to clients. For more information, see Layer 2—LAN
Switching Configuration Guide.

Application of trusted and untrusted ports

Configure ports facing the DHCP server as trusted ports, and configure other ports as untrusted ports.
As shown in
as a trusted port. The trusted port forwards response messages from the DHCP server to the client. The
untrusted port connected to the unauthorized DHCP server discards incoming DHCP response messages.
Figure 27, configure the DHCP snooping device's port that is connected to the DHCP server
69