Verifying The Configuration - HP 6125XLG Layer 3-Ip Services Configuration Manual

[SwitchA] interface vlan-interface 2
[SwitchA-Vlan-interface2] ipv6 address 2::1 64
[SwitchA-Vlan-interface2] quit
[SwitchA] interface vlan-interface 3
[SwitchA-Vlan-interface3] ipv6 address 1::1 64
# Enable the DHCPv6 relay agent on VLAN-interface 3 and specify the DHCPv6 server on the
relay agent.
[SwitchA-Vlan-interface3] ipv6 dhcp select relay
[SwitchA-Vlan-interface3] ipv6 dhcp relay server-address 2::2
2. Enable Switch A to send RA messages, and turn on the M and O flags.
[SwitchA-Vlan-interface3] undo ipv6 nd ra halt
[SwitchA-Vlan-interface3] ipv6 nd autoconfig managed-address-flag
[SwitchA-Vlan-interface3] ipv6 nd autoconfig other-flag

Verifying the configuration

# Display DHCPv6 server address information on Switch A.
[SwitchA-Vlan-interface3] display ipv6 dhcp relay server-address
Interface: Vlan-interface3
Server address
2::2
# Display packet statistics on the DHCPv6 relay agent.
[SwitchA-Vlan-interface3] display ipv6 dhcp relay statistics
Packets dropped
Packets received
Solicit
Request
Confirm
Renew
Rebind
Release
Decline
Information-request
Relay-forward
Relay-reply
Packets sent
Advertise
Reconfigure
Reply
Relay-forward
Relay-reply
Outgoing Interface
: 0
: 14
: 0
: 0
: 0
: 0
: 0
: 0
: 0
: 7
: 0
: 7
: 14
: 0
: 0
: 7
: 7
: 0
181