Professional 2-way lcd remote car starter & alarm system with built in temperature, voltage sensor and two-way serial port data link (15 pages)
Summary of Contents for Auto Page RST-2053AL
Page 1
RST-2053AL PROFESSIONAL REMOTE CAR STARTER & 3 CHANNEL ALARM SYSTEM OPERATION MANUAL THIS PRODUCT IS DESIGNED FOR PROFESSIONAL INSTALLATION ONLY...
Page 4
This WARRANTY CARD is for your record. However, AutoPage reserves the right to request you to submit this WARRANTY CARD which must have complete information to receive warranty service. Please keep this card in a secured place. AUTOPAGE WARRANTY SERVICE CARD Model: _______________ Serial # _______________ CUSTOMER TO COMPLETE...
SECURITY OPERATIONS REMOTE TRANSMITTER OPERATION Your AutoPage Security System comes with two 5-button Remote Control Transmitters that feature a sophisticated code hopping system that will prevent illegal use of a code grabber with an attempt to record and steal your transmitter codes. LOCK –...
Page 6
VALET FUNCTION The Security System has a valet or stand-by mode that can be used when the vehicle is being serviced or valet parked. To activate the valet, turn the vehicles ignition to the “ON” position, then push and hold the valet / override switch for 2 seconds or until the Security Systems LED turns ON solid.
Page 7
LIMITED LIFETIME WARRANTY PROVISIONS ( U.S. and Continental U.S. Only) AutoPage, Inc. W ARRANTS that this new unit has been thoroughly inspected and tested at the factory prior to delivery. life to the original purchaser/user of the equipment under the following conditions: If the product proves defective (according to AutoPage s testing) within the first year, the defective unit may be exchanged or repaired free of charge.
DOMELIGHT ILLUMINATED ENTRY (OPTIONAL) Your AutoPage Vehicle Security System is equipped with a domelight illuminated entry feature which will turn on the vehicles interior lights for 30 seconds after the Security System is disarmed / un- locked. This feature will reset once the vehicles ignition is turned “ON” or if the Security System is re- armed.
Transmitter Programming Enter: 1. Turn ignition switch ‘ON’. 2. Press the valet switch 3 times. 3. Horn will give one long chirp and the LED will begin to flash once every 3 seconds. Programming: 1. Press the any button on the first transmitter. 2.
REMOTE START FEATURES The remote start feature is activated using the remote control transmitters. START: a) Press the red * (star) button for 2 seconds. b) The vehicles parking lights will flash 2 times and stay “ON”. c) All doors will lock. d) The ignition will turn ON and check the system;...
Page 12
1815 W. 205th Street Suite #101 Torrance, CA 90501 Tel: (310) 618-2002 or (800) 262-2527 www.autopageusa.com...