Programming The Radio'slists; Programming The Telephone List Numbers - Motorola PRO7550 User Manual

PROGRAMMING THE RADIO'S
LISTS

Programming the Telephone List Numbers

This feature lets you use the radio's keypad to change
the telephone numbers assigned to any of the
telephone list members. Each phone number can have
up to 16 digits.
To change the telephone list
/ until PROG is dis-
1.
played.
l (the softkey
2.
below PROG ).
3. ; (the softkey below
PHON ). The display
shows the first program-
mable member of the
telephone list.
4. / or ,,
—or—
Use the keypad to enter the desired member's
position number (1 to 19) to view the other
members of the telephone list.
5.
When you stop on a
member of the list, the
display will alternate
between showing the
member's name and
telephone number.
6. Press the select key to enter edit mode.
7. A short press would
enable the editing of the
PROG
telephone number. The
display shows the cur-
rent member's telephone
SCAN PHON CALL
number.
A long press would
8.
enable the editing of the
member's name. The
FIRE DEPT
display shows the cur-
rent member's name.
Use any of the alphanumeric keys to make the
9.
changes. The blinking cursor indicates the
position of the next number to be added. If
you require a pause in the phone dialing
sequence (to allow for a delay), you can do so
by first pressing the "*" key, followed by press-
ing the "#" key. The display will show a "P" for
pause (see page 16).
Alternates between
POLICE DEPT
and
5556213
5556213
POLICE DEPT
49
English