Customising Your Keyset; Assigning Features To Programmable Keys - Samsung LCD 24B User Manual

DCS Gateway

Customising Your Keyset

Assigning Features to Programmable
Keys
To use the various features that are provided by the digital
phone, you can select the feature displayed on the LCD using
the key and soft keys, as described for the relevant
SCROLL
feature. However, it may be more convenient for you to assign
the most commonly-used features to the programmable keys
on the keyset using MMC programming.
First, make sure that your System Administrator has already
assigned the MMC feature to your
• Press the
TRSF
• Press the programmable key against which you wish to as-
sign a feature. The LED of the selected key flashes.
• Enter the 3-digit code of the feature to assign (see the Ap-
pendix for a list of feature codes).
OR
Dial 001. A feature is displayed on the LCD. Find the fea-
ture you require using the ✱ ✱ ✱ ✱ key (previous feature) and #
key (next feature) to scroll the list of features.
• When the required feature is displayed, press the flashing
programmable key. If no additional information is re-
quired, the feature is assigned to the key and the LED is
turned off.
If the feature you select requires additional information (for
example, the AUTO DIAL BLF feature requires you to en-
ter an extension number), enter the information and press
key to enter MMC mode.
— 44 —
Keyset User Guide
key. Then:
TRSF