Battery - HP mt20 Maintenance And Service Manual

Battery

Description
Battery, 4-cell, 48 WHr, 4.21 Ah
Before removing the battery, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2. Place the computer in "Battery Safe mode"
3. Disconnect all external devices connected to the computer.
4. Disconnect the power from the computer by first unplugging the power cord from the AC outlet, and
then unplugging the AC adapter from the computer.
5. Remove the following components:
a. Service door (see
b. Keyboard (see
c. Top cover (see
d. USB/audio board (see
To remove the battery:
CAUTION:
To prevent loss of information, save your work and shut down the computer before removing the battery.
1. Position the computer upright on a flat surface.
2. Remove the 3 Torx T8 2.5×5.0 screws (1) that secure the battery to the computer.
50 Chapter 6 Removal and replacement procedures for Authorized Service Provider parts
Service door on page
Keyboard on page
Top cover on page
USB/audio board on page
Removing a battery that is the sole power source for the computer can cause loss of information.
(Battery Safe mode on page
26).
32)
39)
49)
Spare part number
851610-855
25).