Canon WUX500ST User Manual page 145

Setting PJLink [PJLink]
From [PJLink] in the settings screen, you can set the PJLink functions which are the
standard for projector management on a network. For the setting procedure, refer
to "Network Setting" (P135). For information about PJLink, refer to "What is
PJLink?" (P128).
Item
PJLink
PJLink authentication
Password
Confirm password
Setting Up a Controller Manufactured by Crestron Electronics
[Crestron Controller]
The [Crestron e-Control] screen will open. For details on the Crestron Controller,
visit the Crestron website.
http://www.crestron.com/
Explanation
Turn the PJLink function on or off. If
OFF is selected, the PJLink function
will be turned off and the other settings
in this screen cannot be changed.
Select whether to turn the PJLink
authentication function on or off. The
following settings cannot be changed
when this setting is [OFF].
[Password]
[Confirm password]
Enter the PJLink authentication
password in 1-byte alphanumeric
characters (1 - 32 characters).
For confirmation, enter the same
password that you entered in
[Password].
145
Menu Description
Factory default setting
ON
ON
system
system