Canon WUX500ST User Manual page 142

Menu Description
Mail Authentication Settings [Mail auth]
From [Mail auth] in the settings screen, you can configure the settings for
authentication of mail that is sent when an error occurs. For the setting procedure,
refer to "Network Setting" (P135).
Item
Mail authentication
User name
Password
Confirm password
POP3 server IP
address
POP3 server port
number
POP before SMTP
response time
Explanation
Select the mail authentication method.
If OFF is selected, the other mail
authentication settings cannot be
changed.
Enter the user name to use for mail
authentication in 1-byte alphanumeric
characters and symbols (1 - 63
characters).
Enter the password for mail
authentication in 1-byte alphanumeric
characters and symbols (1 - 63
characters).
For confirmation, enter the same
password as you entered in
[Password].
Enter the POP3 server IP address in 1-
byte numbers.
Enter the POP3 server port number in
1-byte numbers (1 - 65535).
Enter the SMTP authentication timeout
period after POP3 authentication (unit:
milliseconds) using 1-byte numbers (0 -
9999 milliseconds).
142
Factory default setting
OFF
<Blank>
<Blank>
<Blank>
0.0.0.0
110
300