Canon WUX500ST User Manual page 106

Menu Description
To Unlock Key Lock Function
Turn off the projector and unplug the power plug. Hold down the OK button on the main unit
and plug in the power cord, as you continue to hold down the OK button. In a moment, a
beep will sound, and the controls will be unlocked.
When you access this setting from the projector's side controls, [Main unit] is not
available. Similarly, when you access the setting from the remote control, [Remote
(wireless)] is not available.
Remote control channel
Separate channels can be assigned to up to four projectors so that a single remote control
can be used with each projector.
Selecting the Projector Channel
If an optional wired remote control (RS-RC05) is used, there is no need to set the remote
control channel.
Option
Ch1
Ch2
Ch3
Ch4
Independent
Selecting a Channel on the Remote Control
After changing the projector channel from the menu, always change the remote control
channel accordingly.
Ch1 Hold both the OK button and [ ] button for 3 seconds.
Ch2 Hold both the OK button and [ ] button for 3 seconds.
Ch3 Hold both the OK button and [ ] button for 3 seconds.
Ch4 Hold both the OK button and [ ] button for 3 seconds.
Independent Hold both the OK button and MENU button for 3 seconds.
Audio in terminal select
Select the source terminal for audio output.
Option
Off
Audio in 1
Audio in 2
HDMI
HDBaseT
LAN
Select the remote control channel to use with this projector.
Can be controlled from a remote control set to any channel.
No audio is output.
Use audio signals from AUDIO IN 1 for audio output.
Use audio signals from AUDIO IN 2 for audio output.
Use HDMI audio signals for audio output.
Use HDBaseT audio signals for audio output.
Use LAN audio signals for audio output. Audio is transferred by the
NMPJ application.
Audio is transferred via the port selected in [Communication
settings] > [Wired network] (P107).
106
Function
Function