Messages - Sony MHC-GN88D Operating Instructions Manual

To return the DVD setup to the
default settings, perform reset as
follows:
1
Press DVD SETUP on the remote in
stop mode.
The Setup Menu appears on the on-screen
display.
2
Press M or m repeatedly to select
"RESET", then press PUSH ENTER
(or ENTER on the remote).
3
Press M or m repeatedly to select
"YES", then press PUSH ENTER
(or ENTER on the remote).
It takes a few seconds to complete. Do not
press ?/1 when resetting the system.
Note
Turn off the sub woofer before you reset the system.

Messages

One of the following messages may appear or
flash in the display during operation.
DVD/VIDEO CD/CD/MP3/JPEG
Cannot Play
• A disc that cannot be played was inserted.
• A disc with an unsupported Region code was
inserted.
No Disc
• There is no disc on the disc tray.
Push STOP!
• You pressed PLAY MODE or DVD SETUP
during playback.
Step Full!
• You tried to program 26 or more tracks (steps).
Reading
• The system is reading information of the disc.
Some buttons are not available.
Please Wait
• The system is doing initialization process.
Play Limit
• You tried to playback an MP3 audio track whose
format is not supported by this system.
Data Error
• You tried to playback a JPEG image file whose
format is not supported by this system.
Not in Use
• You pressed an invalid button.
TAPE
No Tab
• You cannot record the tape because the tab has
been removed from the tape.
No Tape
• There is no tape in the tape deck.
TIMER
OFF TIME NG!
• The on time and off time of Daily Timer or
Timer Recording is same.
SET CLOCK!
• You pressed CLOCK/TIMER SELECT before
the clock is set.
SET TIMER!
• You pressed CLOCK/TIMER SELECT before
Daily Timer or Timer Recording is set.
MHC-GN88D 4-248-439-12 (1)
GB
67