Table of Contents
Advertisement
3
Making the Connections
3.3
Cascading RML Mixer Setup
3.3.4
Turning on Cascading
Setting up cascading for the RML mixers is done using UC Surface. First,
select the mixer you'd like to use as the master for channels 1-32.
An easy way to verify that you're connected to the right mixer is to
press the Mute All button on the front panel of the mixer. If all the
channels in UC Surface mute, you're connected to the right mixer.
Open the Settings view in UC Surface and then open the Networking tab.
Here you'll see a section for cascading mixers. Select the mixer
you'd like to be channels 33-64 from the drop down list.
Note: Establishing the cascaded connection may take several seconds. When
complete, you'll see each mixer displayed in the Master and Slave unit spaces.
You're now cascaded and using the mixers as a single 64-channel mixer.
1. The tab at the top of the screen for the slave mixer will go away
2. When looking at the mixer view it will now show all 64-channels for both mixers
3. To remove the Cascade simply select None from the
"Cascade with mixer" drop down list
If you're using a CS18AI, simply select either mixer from the dropdown list in the
UCNET screen and you'll have control of both mixers as a single 64-channel system.
You are now set up with the amazing StudioLive AVB 64-channel mixing system!
For additional details and instruction on configuring your StudioLive
AI as your default sound input and output device, please refer to your
manual and the video guides in your My PreSonus account.
StudioLive
RML-Series
™
Owner's Manual
10
Hide quick links:
Advertisement
Table of Contents
