Network Map; Status Screen In Easy Mode - ZyXEL Communications WAP6405 User Manual

4.4 Network Map

Note: The Network MAP is viewable by Windows XP (need to install patch), Windows Vista
and Windows 7 users only. For Windows XP (Service Pack 2) users, you can see the
network devices connected to the WAP6405 by downloading the LLTD (Link Layer
Topology Discovery) patch from the Microsoft Website.
Note: Don't worry if the Network Map does not display in your web browser. This feature
may not be supported by your system. You can still configure your WAP6405's
features in the Expert Mode.
When you log in to the Web Configurator, the Network Map is shown as follows.
Figure 9 Network Map
The line connecting the WAP6405 to the gateway becomes green when the WAP6405 is able to ping
the gateway. It becomes red when the ping initiating from the WAP6405 does not get a response
from the gateway. The same rule applies to the line connecting the gateway to the Internet.
You can also view the devices (represented by icons indicating the kind of network device, such as
android device, apple device or Windows OS) connected to the WAP6405, including those
connecting wirelessly. Right-click on the Refresh button located on the WAP6405 icon to refresh
the network map. Click on a device and select to view information about the device, block or allow
the device's access to the WAP6405, or view the parental control rules.

4.5 Status Screen in Easy Mode

In the Network Map, click Status to view read-only information about the WAP6405.
Chapter 4 Easy Mode
WAP6405 User's Guide
20