Specifications - Magnat Audio Sounddeck 150 Installation Notes

Important notes for installation / warranty card
Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 9
(18) Menu: Opens the settings of the Sounddeck
The following settings can be selected and changed with the VOL +/- buttons. (14).
Pressing the menu button again will set these changes.
BASS: Increases (+) or decreases (-) the volume of low frequencies for manual adjustment of the sound pattern.
TREBLE: Increases (+) or decreases (-) the volume of high frequencies for manual adjustment of the sound pattern.
SYNC: Some source material may be asynchronous in picture and sound. The Audio Sync setting allows to manually adjust
picture and sound synchronization by delaying the sound in 10-ms-steps.
ASTBY: This device switches off automatically after approx. 20 minutes to save energy. This function can be manually disabled.
The factory setting is enabled.
RESET: Sets all settings back to default settings.
EXIT: Exits the setting menu.
(19) BT PAIR: Switches the device to the pairing mode when in Bluetooth operation to establish a connection to a Bluetooth
source device.
(20) SkIP TRAck BAckWARdS:
Pressing this once starts the track currently being played on a Bluetooth/USB source device from the beginning. Repeatedly
pressing the button allows you to skip to previous tracks.
(21) PLAY/PAuSe:
Pauses the current track on a Bluetooth/USB device or resumes playback.
USB mode: By holding down the PLAY/PAUSE button for a long period of time, the repeat mode or the shuffle mode get
activated.
(22) SkIP TRAck FoRWARdS:
Pressing this once starts the track currently being played on a Bluetooth/USB source device from the beginning. Repeatedly
pressing the button allows you to skip to subsequent tracks.
SeRVIce And TecHnIcAL PRoBLeMS
If you should encounter any technical problems, please contact your specialist dealer or Magnat Audio-Produkte GmbH,
Tel.: + 49 (0) 2234807-0.

SPecIFIcATIonS

Configuration:
Output power RMS/Max.:
Frequency range:
Cross-over frequency:
Standby consumption:
Dimensions (WxHxD):
Weight:
SUBJECT TO TECHNICAL CHANGE
2.1 full active
2 x 25 /50 watts (L+R-canal)
1 x 50 /100 watts (subwoofer)
28 — 26000 Hz
200 Hz/3000 Hz
<0.5 watts
700 x 80 x 340 mm
6.0 kg
13

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents