Automatic Switch-Off Function; Specifications - Magnat Audio Sounddeck 700 Important Notes For Installation & Warranty Card

eQualIZer SettIngS (eQ)
(17) treble: Increases (+) or decreases (-) the volume of high frequencies for manual adjustment of the sound pattern.
(18) baSS: Increases (+) or decreases (-) the volume of low frequencies for manual adjustment of the sound pattern.
(19) moVIe: Optimises the frequency response of the unit for film sound reproduction.
(20) muSIc: Optimises the frequency response of the unit for music playback.
(21) VoIce: Emphasises the vocal range for particularly good speech intelligibility.
(22) eQ reSet: Resets all of the changes made to the frequency response (buttons 17 to 21) to a neutral setting. This does not
affect the night mode (14) or the 3D surround sound function (16).

automatIc SWItch-off functIon

To save power the unit will automatically switch to its standby mode after approximately 60 minutes if no signal is detected at
the input and no commands are issued via the remote control. To reactivate the unit press the ON/STBY button (7) on the remote
control.
SerVIce and technIcal problemS
If you should encounter any technical problems, please contact your specialist dealer or Magnat Audio-Produkte GmbH,
Tel.: 02234807-0.

SpecIfIcatIonS

Configuration:
Output power RMS/Max.:
Frequency range:
Cross-over frequency:
Standby consumption:
Dimensions (WxHxD):
Weight:
SUBJECT TO TECHNICAL CHANGE
3 ways
2 x 30 + 2 x 20 + 2 x 15 watts
2 x 70 + 2 x 45 + 2 x 30 watts
26 — 30000 Hz
130, 2800 Hz
0.5 watts
750 x 115 x 376 mm
10.8 kg
11