More About Print Options - Toshiba GA-1120 Printing Manual

A
A-10 Print Options
Option and settings
(default setting is underlined)
Spot Color Matching
Printer's default/Off/On
Stapler Mode
Off/Corner/Double/Finisher with
Saddle Stitcher
Toner Reduction
Off/On/Printer's default
Description
Select Off to print specified PANTONE
colors in your job using the current
CMYK Simulation and CMYK
Simulation Method.
Select On to activate the PANTONE
Lookup Table. The GA-1120 prints
specified PANTONE colors in your job
by matching the CMYK print blend to
the same color from the PANTONE
library.
Specify how to staple
multiple-page/multiple-copy jobs.
Specify if you want the Toner Reduction
On to conserve the amount of toner used
when printing a job.

More about print options

The following sections provide additional information about print options. See the
table in the previous section for information on the settings, requirements, and
constraints in effect for these options.
Duplex
All duplex printing features are available with plain paper, thin, or thick 1 media type.
Requirements, constraints,
and information
The Printer's default setting reflects the
setting specified in GA-1120 Setup.
For Windows, choose Expert Color as the
Color Mode to access this option.
For more information, see the
Color Guide.
The Finisher with Saddle Stitcher is
only available through Command
Workstation overrides. For more
information, see page A-13.
For more information on Toner
Reduction, see page A-14.