Signal Type - Haier LTF47K1 Service Manual

42"&47" LCD TV

3.5 Signal Type

● TV RF input system -
● TV RF input level -
● CVBS input -
● S-Video input -
● Component video input - Y: 1000mVpp (include sync), PbPr: 700mVpp terminated With Input impedance of 75Ω.
● Audio input -
● SCART input / output -
● HDMI (High Definition Multimedia Interface)-
● CI Slot -
● PC VGA input -
● PC Audio input -
● Headphone output -
● SPDIF output -
● Amplifier output -
● Speaker -
Aerial or cable should support PAL/SECAM/DVB-T
10mV (80dBuV) typical, 30dBuV ~ 100dBuV receiving capability, terminated with input
impedance of 75Ω.
1000mVpp (including 300 mV sync level), terminated with input impedance of 75Ω.
Y: 1000mVpp (include sync), C: 300mVpp terminated with Input Impedance of 75Ω.
Support 480i/p, 576i/p, 720p, 1080i at 50Hz or 60Hz refresh rate.
Sensitivity 500mV (rms). For rated power, the amplifier should be able to handle input
signal up to 2.0V, input impedance >10KΩ.
Full SCART, includes RGB in, CVBS (audio L/R) in/ (TV out).
Half SCART includes S-Video in, CVBS (audio L/R) in/ (TV out).
Support 480i /480p, 576i/576p, 720p, 1080i format with HDCP
Digital interface with 4 channels TMDS signal
PCMCIA card 5V input.
700 mV input level, TTL level sync, RGB in, 75Ω impedance.
500 mVrms input level, impedance > 10 kΩ.
10 mW (Typ.) at 32Ω, impedance between 8 - 600Ω.
Level: +/- 0.5V Square Wave.
12W+/-10%
6Ω
33
Haier LTF42K1&LTF47K1