Ignition Coil Inspection - KYMCO Like 50 Service Manual

15
. ELECTRICAL EQUIPMENT

IGNITION COIL INSPECTION

Continuity Test
＊
This test is to inspect the continuity of
ignition coil.
Remove the met-in box. ( 12)
Measure the resistance between the
ignition coil primary coil terminals.
Resistance (20℃): 0.153～0.187Ω
Measure the secondary coil resistance
between the spark plug cap and the primary
coil terminal as Figure A shown.
Resistance (20℃) (with plug cap):
10～14KΩ
Measure the secondary coil resistance
between the ignition coil terminal and the
primary coil terminal as Figure B shown.
Resistance (20℃) (without plug cap):
7～9KΩ
Figure B
Ignition Coil
LIKE 50/125
Figure A
8