7.4
Technical data
7.4.1
General technical specifications
General technical specifications
Order number
Weight with hard disk drive, without
mounting brackets
Power supply
Brief voltage interruption in accord-
ance with Namur
Current consumption
Noise emission
Degree of protection
Protection class
Quality assurance
The device should only be connected to a 24 VDC power supply which meets the requirements of
1
safe extra low voltage (SELV) according to IEC/EN/DIN EN/UL 60950-1. The power supply must
meet the requirement NEC Class 2 or LPS according to the IEC/EN/DINEN/UL 60950-1.
Electromagnetic compatibility
Immunity with regard to con-
ducted interference on the
supply lines
Noise immunity on signal lines
Immunity to discharges of static
electricity
Immunity to RF interference
Magnetic field
SIMATIC IPC227E
Operating Instructions, 11/2016, A5E35782395-AB
1
± 2 kV in accordance with IEC 61000-4-4; Burst
± 1 kV in accordance with IEC 61000-4-5; symmetrical surge
± 2 kV in accordance with IEC 61000-4-5; asymmetrical surge
± 1 kV to IEC 61000-4-4; Burst; Length < 3 m
± 2 kV in accordance with IEC 61000-4-4; Burst; length > 3 m
± 2 kV in accordance with IEC 61000-4-5; Surge; length > 30 m
± 6 kV contact discharge in accordance with IEC 61000-4-2
± 8 kV air discharge in accordance with IEC 61000-4-2
10 V/m, 80 ... 2 GHz,
80% AM according to IEC 61000-4-3
3 V/m, 2 ... 2.7 GHz, 80% AM according to IEC 61000-4-3
10 V, 10 KHz ... 80 MHz, 80% AM according to IEC 61000-4-6
100 A/m, RMS value 50/60 Hz in accordance with IEC 61000-4-8
See order documents
Basic: Approx. 1.4 kg
•
PCIe: approx. 2.4 kg
•
24 VDC (19.2 to 28.8 V)
Up to 20 ms buffer time at full load
Max. 10 events per hour; recovery time at least 1 s
max. 1.8 A at 24 V
< 40 dB(A) according to DIN 45635-1
IP 40 in accordance with IEC 60529
Protection class I in accordance with IEC 61140
In accordance with ISO 9001
Technical specifications
7.4 Technical data
99