Fcc (Usa) And Ices (Canada) Compliance - Siemens simatic ipc227e Operating Instructions Manual

7.1.1

FCC (USA) and ICES (Canada) Compliance

FCC (USA) and ICES (Canada) Compliance
USA
Federal Commu-
nications Commis-
sion
Radio Frequency
Interference
Statement
Shielded Cables
Modifications
Conditions of
Operations
CANADA
Canadian Notice
Avis Canadien
RCM AUSTRALIA/NEW ZEALAND
This product meets the requirements of EN 61000-6-3 Generic standards - Emission
standard for residential, commercial and light-industrial environments.
This product meets the requirements of the standard EN 61000-6-3 Generic standards -
Emission standard for residential, commercial and light-industrial environments.
SIMATIC IPC227E
Operating Instructions, 11/2016, A5E35782395-AB
This equipment has been tested and found to comply with the limits for a Class
A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed
to provide reasonable protection against harmful interference when the equip-
ment is operated in a commercial environment. This equipment generates, uses,
and can radiate radio frequency energy and, if not installed and used in accord-
ance with the instruction manual, may cause harmful interference to radio com-
munications. Operation of this equipment in a residential area is likely to cause
harmful interference in which case the user will be required to correct the inter-
ference at his own expense.
Shielded cables must be used with this equipment to maintain compliance with
FCC regulations.
Changes or modifications not expressly approved by the manufacturer could
void the user's authority to operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that
may cause undesired operation.
This Class B digital apparatus complies with Canadian ICES-003 (B).
Cet appareil numérique de la classe B est conforme à la norme NMB-003
(B) du Canada.
Technical specifications
7.1 Certificates and approvals
87