Siemens simatic ipc227e Operating Instructions Manual page 20

Industrial pc
Hide thumbs Also See for simatic ipc227e:
Table of Contents

Advertisement

Safety instructions
2.1 General safety instructions
NOTICE
"Open Type" UL508
Note that the device is classified as "Open Type" for use in the area of Industrial Control
Equipment (UL508). A UL508 conform enclosure is therefore a mandatory requirement for
approval or operation according to UL508.
Battery and rechargeable battery
Risk of explosion and release of harmful substances
Improper handling of lithium batteries can result in an explosion of the batteries.
Explosion of the batteries and the released pollutants can cause severe physical injury.
Worn batteries jeopardize the function of the device.
Note the following when handling lithium batteries:
• Replace used batteries in good time; see the section "Replacing the backup battery" in
• Replace the lithium battery only with an identical battery or types recommended by the
• Do not throw lithium batteries into fire, do not solder on the cell body, do not recharge,
Strong high-frequency radiation
NOTICE
Observe immunity to RF radiation
The device has an increased immunity to RF radiation according to the specifications on
electromagnetic compatibility in the technical specifications.
Radiation exposure in excess of the specified immunity limits can impair device functions,
result in malfunctions and therefore injuries or damages.
Read the information on immunity to RF radiation in the technical specifications.
20
WARNING
the operating instructions.
manufacturer (order no.: A5E34345932).
do not open, do not short-circuit, do not reverse polarity, do not heat above 100°C and
protect from direct sunlight, moisture and condensation.
Operating Instructions, 11/2016, A5E35782395-AB
SIMATIC IPC227E

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents