Section 1 Initial Cleansing & First Brew - Keurig K15 Use & Care Manual

INITIAL CLEANSING & FIRST BREW
8. Wait until all water has drained
(5 seconds) into the brewer before
lowering the Handle completely.
10. The BREW Button will flash red to
indicate that the water is heating.
After about 2 minutes, the BREW
Button will turn solid red when the
beverage starts to dispense. Remove
used K-Cup® pod after brewing.
Caution: K-Cup pod will be hot.
®
2 Min
9. The BREW Button will flash blue.
Press the BREW Button.
Caution: Do not lift the Handle while brewing.
11. Enjoy your beverage! Your brewer is ready
to use again or you can power it off.
12
As a safety feature, brewer automatically shuts off
after 90 seconds. If completing the initial cleansing
brew, discard hot water into the sink. Your brewer is
ready to use again.
90 Sec
CAUTION: Two sharp needles are used to puncture the
K-Cup® pods. One is above the K-Cup® Pod Holder and
the other is in the bottom of the K-Cup® Pod Holder.
To avoid risk of injury, do not put your fingers inside
the K-Cup® Pod Assembly Housing.
CAUTION: During the brewing process, the
water gets extremely hot. To avoid risk of injury,
do not lift the Handle or open the K-Cup® Pod
Assembly Housing until brewing is complete.
1 | LET'S GET BREWING!
13