Toshiba GA-1120 Quick Start Manual page 6

6 Quick Start Guide
T GA-1120
O PREPARE FOR
1. Print a Test Page from the GA-1120 Control Panel.
To print a Test Page, press the Menu button on the Control Panel to access the
Functions menu. Choose Print Pages, and then choose Test Page.
2. With the GA-1120 turned off, connect the network cable to the GA-1120.
The network should already be installed and operational.
3. Turn on the GA-1120.
Configuring the network server
If you require a network server, you must configure that server to provide client access
to the GA-1120 as a color printer. To configure a network server in a Windows or
UNIX network environment, see the
and Windows NT/2000 (using TCP/IP) networks, the network servers must be
configured for printing to the GA-1120 before you configure GA-1120 network
settings in Setup. For more information, see the
Setting up the GA-1120 from the Control Panel
Setup configures the GA-1120 to communicate with other devices and manage print
jobs. You must perform Setup the first time you turn on the GA-1120 after new system
software is loaded or any time Server software is reinstalled. Initial Setup must be
performed at the GA-1120 Control Panel.
Perform the following Setup options in the order listed:
•
Server Setup
•
Network Setup
the GA-1120.
•
Printer Setup
CONFIGURATION
Configuration
—specifies system options.
—specifies all the active network systems that transmit print jobs to
—specifies how print jobs and queues are managed.
Guide. For Token Ring, Novell,
Configuration Guide.
Part number: 45028013