Disposal Of Your Old Appliance; Troubleshooting - Zte z289l User Manual

Hide thumbs Also See for z289l:
Table of Contents

Advertisement

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
—Consult the dealer or an experienced radio/ TV technician for help.

Disposal of Your Old Appliance

 When this crossed-out wheeled bin symbol is attached to a product, it
means the product is covered by the European Directive 2002/96/EC.
 All electrical and electronic products should be disposed of separately
from the municipal waste stream via designated collection facilities
appointed by the government or the local authorities.
 The correct disposal of your old appliance will help prevent potential
negative consequences for the environment and human health.
For this product's recycling information based on WEEE directive, please send an e-mail to
weee@zte.com.cn

Troubleshooting

Problem
Cannot
establish
the
connection between your device
and client.
The client connected to the device
cannot access the Internet.
Cannot
visit
the
webGUI
configuration page.
About the password
22 Confidential and Proprietary Information of ZTE CORPORATION
Suggested Solution
Wi-Fi
Refresh network list and select the correct SSID.
Check the IP address to make sure your client can obtain an IP address automatically
in the Internet protocol (TCP/IP) properties.
Type the correct network key (Wi-Fi password) when you connect to the device.
Make sure your SIM card is available.
Change the location to find a place with good signal.
Contact your service provider.
Enter the correct address. The default address is
http://mobile.hotspot. .
Only use one network adapter in your PC.
Do not use any proxy server.
For the Wi-Fi connection password, please check the label on the device.
Select Device Info on the LCD screen to check the SSID and Wi-Fi connection
password.
The default password of the webGUI configuration page is admin.
If you changed the password and forgot the new password, select Device Info on the
ZTE Z289L User Manual
http://192.168.0.1
or

Advertisement

Table of Contents
loading

Table of Contents