Connecting The Audio Cables - Philips DVDR3455H User Manual

Step 1: Basic Recorder Connections
VIDEO (CVBS)
EXT 1
TV-OUT ANTENNA-IN
EXT 2
S-VIDEO (Y/C)
DIGITAL IN
AV amplifi er/
receiver

Connecting the audio cables

This connection enables you to listen to
the sound.
Option 1: Using an audio cable
You can connect the recorder to a two
channel stereo system or receiver in
order to enjoy the stereo sound system.
Use the supplied audio cable (red/white
plugs) to connect the AUDIO
OUTPUT jacks to these devices with
the same input jacks.
TIPS: Before making or changing any connections, make sure that all the devices are disconnected
from the power outlet.
VIDEO (CVBS)
INPUT OUTPUT
DVD RECORDER 22F8
L OUT 1
R
LISTED
Complies with 21 CFR
OUT 2
R
1040.10 and 1040.11
AUDIO S-VIDEO (Y/C)
Option 2
COMPONENT
P Y
R
VIDEO
L L
R R
COAXIAL P B
(DIGITAL AUDIO) OUT 3 AUDIO
Option 1
OR
Option 2: Using a coaxial cable
You can connect the recorder to an AV
amplifi er/receiver in order to enjoy
multichannel surround sound.
Use a coaxial cable (not supplied) to
connect the COAXIAL (DIGITAL
AUDIO) jack to the digital input on the
AV amplifi er/receiver (with a digital
multichannel sound decoder).
Before you start operating, set the audio
settings accordingly (see "Setup Menu
Options – AUDIO settings.)
If the AUDIO settings do not match your
amplifi er's capabilities, the amplifi er may
produce a strong, distorted sound or no
sound at all.
Helpful Hint:
– Do not connect your TV's audio output
jacks to the AUDIO L/R (IN-EXT) jacks on
this recorder, this may cause unwanted
noise.
(continued)
TV
S-V ID E O
AU D IO IN
O U T
V ID E O IN
17