Step 2 : Optional Connections; Tv Has Only An Antenna Input Jack - Philips DVDR3455H User Manual

Step 2 : Optional Connections

A
TV-OUT
B
Back of an RF
Modulator
(Example only)
ANT IN
TV has only an antenna
input jack
Use this connection if your TV has only a
single Antenna In jack (or labeled as
75 ohm or RF IN) and does not have any
audio/video jacks.
For this connection, you need a RF
modulator in order to view the disc
playback.
A
You may have an Antenna/Cable TV
signal (or from the Cable Box/Satellite
Receiver/VCR) connected to your TV's
antenna input jack (VHF/UHF RF IN.)
Remove it from the TV and connect it to
the ANTENNA-IN
recorder.
B
Use the supplied RF coaxial cable to
connect the TV-OUT
recorder to the antenna input jack on the
RF modulator.
TIPS: Before making or changing any connections, make sure that all the devices are disconnected
from the power outlet.
18
ANTENNA
SATELLITE
CABLE
VIDEO (CVBS)
INPUT
EXT 1
DVD RECORDER 22F8
L
ANTENNA-IN
Complies with 21 CFR
R
1040.10 and 1040.11
EXT 2
S-VIDEO (Y/C) AUDIO
TO TV
CH3 CH4
VIDEO R L
IN AUDIO IN
C
jack on the
jack on the
VIDEO (CVBS)
P COMPONENT
OUTPUT R
VIDEO
OUT 1
R
LISTED
OUT 2
COAXIAL P
S-VIDEO (Y/C) (DIGITAL AUDIO) OUT 3
D
C
Use an RF coaxial cable (not supplied) to
connect the TO TV jack on the RF
modulator to the antenna input jack on
your TV.
D
Use the supplied AV cables (yellow ends)
to connect the VIDEO (CVBS) -
OUT1 jack on the recorder to the video
input jack (or labeled as A/V In, Video In,
Composite or Baseband) on the RF
modulator.
E
Use the supplied AV cables (red/white
ends) to connect the AUDIO L/R -
OUTPUT jacks on the recorder to the
audio input jack (or labeled as AUDIO IN
or LINE IN) on the RF modulator.
Helpful Hints:
– If you have connected the TO TV jack on
your RF modulator to your TV, set your TV to
channel 3 or 4.
– See your electronics retailer for details on
RF modulator availability and operations.
Y
L L
R R
B
AUDIO
E
TV