Installing the base cover
1
Align the base cover with the screw holders on the computer.
2
Press the edges of the cover until it clicks into place.
3
Tighten the ( 8 screws - M2.5L8; 3 screws - M2L2; 2 screws- M2L2) screws to secure the base cover to the computer.
4
Flip the computer over.
5
Open the display and connect the optical drive connector to the system board.
6
Tighten the screws to secure the base cover to the palm rest.
7
Install the:
a
keyboard
b
optical drive
c
battery
8
Follow the procedure in
Hard drive
Removing the hard drive assembly
1
Follow the procedure in
2
Remove the:
a
battery
16
Removing and installing components
After working inside your
computer.
Before working inside your
computer.