JVC KS-FX621 Service Manual page 16

KS-FX621
QQ
3 7 63 1515 0
2.2.22 Removing the main motor assembly / sub motor assembly
(See Fig.40 to 42)
(1) Remove the belt at the bottom.
(2) Remove the polywasher and pull out the mode gear.
(3) Pull out the reduction gear (B).
(4) Remove the polywasher and pull out the reduction gear
(A).
(5) Remove the two screws D attaching the main motor as-
sembly.
(6) Remove the two screws E attaching the sub motor assem-
bly.
(7) Unsolder the wires on the reel board if necessary.
CAUTION:
When reassembling, adjust the length of the wires extending
from the sub motor asswmbly by attaching them to the side of
the sub motor assembly with the wires extending from the
main motor assembly using a spacer.
TE
L 13942296513
www
1-16 (No.49825)
http://www.xiaoyu163.com
x ao
y
. i
http://www.xiaoyu163.com
8
Reduction gear (B)
Belt
Reduction gear (B)
E
Q Q
3 6 7 1 3
Spacer
Main motor assembly
Sub motor assembly
u163
.
2 9 9 4 2 8
Main motor
D
assembly
E
Mode gear
Polywasher
Fig.40
Polywasher
Reduction gear (A)
D
1 5 0 5 8 2 9 9 4
Main motor assembly
Sub motor assembly
Fig.41
m
co
Fig.42
9 9
Reduction
gear (A)
Polywasher
Sub motor
assembly
2 8 9 9
Spacer