Ford Taurus2017 Owner's Manual page 64

E138637
You can use the keypad to do the
following:
• Lock or unlock the doors.
• Program and erase user codes.
• Arm and disarm the anti-theft alarm.
• Recall memory seat and mirror
positions.
You can operate the keypad with the
factory-set five-digit entry code. The code
is on the owner's wallet card in the glove
box and is available from an authorized
dealer. You can also program up to five of
your own five-digit personal entry codes.
Programming a Personal Entry Code
1. Enter the factory-set five-digit code.
2. Press 1·2 on the keypad within five
seconds.
3. Enter your personal five-digit code.
You must press each number within
five seconds of each other.
4. Press 1·2 on the keypad to save
personal code 1.
The doors lock then unlock to confirm that
programming was successful.
Taurus (CPH) Canada/United States of America, enUSA, First Printing
Doors and Locks
To program additional personal entry
codes, repeat steps 1 through 3, then for
step 4:
•
•
•
•
Hints:
•
•
•
Recalling Memory Positions (If
Equipped)
The programmed entry codes recall driver
memory positions as follows:
•
•
Note: Personal entry codes 3, 4 and 5 will
not recall memory positions.
Erasing a Personal Code
1.
2. Press and release 1·2 on the keypad
3. Press and hold 1·2 for two seconds.
All personal codes erase and only the
factory-set five-digit code works.
Anti-Scan Feature
The keypad goes into an anti-scan mode
if you enter the wrong code seven times.
This mode turns off the keypad for one
minute and the keypad lamp flashes.
61
Press 3·4 to save personal code 2.
Press 5·6 to save personal code 3.
Press 7·8 to save personal code 4.
Press 9·0 to save personal code 5.
Do not set a code that uses five of the
same number.
Do not use five numbers in sequential
order.
The factory-set code works even if you
have set your own personal code.
Entry code 1 recalls driver 1 memory
positions.
Entry code 2 recalls driver 2 memory
positions.
Enter the factory-set five-digit code.
within five seconds.
You must do this within five seconds
of completing step 2.