Ford taurus 2013 Owner's Manual
Hide thumbs Also See for taurus 2013:
Table of Contents

Advertisement

Quick Links

Child seats . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19
Child seat positioning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19
Booster seats . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .21
Installing child safety seats . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .24
Child safety locks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .32
Fastening the safety belts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .35
Safety belt height adjustment . . . . . . . . . . . . . . . . . . . . . . . . . . . . .38
Safety belt warning light and indicator chime . . . . . . . . . . . . . . . . . .38
Safety belt-minder . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .39
Child restraint and safety belt maintenance . . . . . . . . . . . . . . . . . . .41
Driver and passenger airbags . . . . . . . . . . . . . . . . . . . . . . . . . . . . .45
Front passenger sensing system . . . . . . . . . . . . . . . . . . . . . . . . . . .47
Side airbags . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .51
Safety canopy curtain airbags . . . . . . . . . . . . . . . . . . . . . . . . . . . . .52
Crash sensors and airbag indicator . . . . . . . . . . . . . . . . . . . . . . . . .54
Airbag disposal. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .55
General information on radio frequencies. . . . . . . . . . . . . . . . . . . . .56
Remote control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .57
Keys . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .57
Replacing a lost key or remote control. . . . . . . . . . . . . . . . . . . . . . .63
Settings, MyKey . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .64
Creating. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .65
2013 Taurus
Owners Guide gf, 2nd Printing
USA (fus)
1
9
17
33
42
44
56
64

Advertisement

Table of Contents
loading

Summary of Contents for Ford taurus 2013

  • Page 1: Table Of Contents

    Table of Contents Introduction Child Safety Child seats ......... . .19 Child seat positioning .
  • Page 2 Table of Contents Clearing ..........66 System status.
  • Page 3: Table Of Contents

    Table of Contents Windows and Mirrors Power windows ........95 Exterior mirrors .
  • Page 4 Table of Contents Memory function ........163 Heated seats .
  • Page 5: Table Of Contents

    Table of Contents Stability Control AdvanceTrac ........211 Parking Aids Sensing system.
  • Page 6 Table of Contents Customer Assistance Reporting safety defects (U.S. only) ..... . .275 Reporting safety defects (Canada only) .....275 Fuses Changing a fuse .
  • Page 7: Table Of Contents

    Table of Contents Vehicle Care Cleaning products........314 Cleaning the exterior .
  • Page 8 Errors and omissions excepted. © Ford Motor Company 2012 2013 Taurus Owners Guide gf, 2nd Printing...
  • Page 9: Introduction

    Introduction ABOUT THIS MANUAL Thank you for choosing Ford. We recommend that you take some time to get to know your vehicle by reading this manual. The more that you know about it, the greater the safety and pleasure you will get from driving it.
  • Page 10 Introduction SYMBOL GLOSSARY WARNING: You risk death or serious injury to yourself and others if you do not follow the instruction highlighted by the warning symbol. These are some of the symbols you may see on your vehicle. Symbol Description Symbol Description Symbol Description Safety alert...
  • Page 11 In order to properly diagnose and service your vehicle, Ford Motor Company, Ford of Canada, and service and repair facilities may...
  • Page 12 EDR. Ford Motor Company and Ford of Canada do not access event data recorder...
  • Page 13 If you do not want Ford or its vendors to receive this information, do not activate the service. Ford Motor Company and the vendors it uses to provide you with this information do not store your vehicle travel information.
  • Page 14 See www.dtsc.ca.gov/hazardouswaste/perchlorate for more information. FORD CREDIT (U.S. ONLY) Ford Credit offers a full range of financing and lease plans to help you acquire your vehicle. If you have financed or leased your vehicle through Ford Credit, thank you for your business.
  • Page 15 Genuine Ford and Motorcraft replacement parts are the only replacement parts that benefit from a Ford Warranty. Damage caused to your vehicle as a result of the failure of non-Ford parts may not be covered by the Ford Warranty. For additional information, refer to the terms and conditions of the Ford Warranty.
  • Page 16 Introduction WARNING: Driving while distracted can result in loss of vehicle control, accident and injury. Ford strongly recommends that you use extreme caution when using any device or feature that may take your focus off the road. Your primary responsibility is the safe operation of your vehicle.
  • Page 17: Child Safety

    NHTSA and other safety organizations, or are the minimum requirements of law. Ford recommends checking with a NHTSA Certified Child Passenger Safety Technician (CPST) and consulting your pediatrician to make sure your child seat is appropriate for your child, and is compatible with and properly installed in the vehicle.
  • Page 18 Child Safety Recommendations for Safety Restraints for Children Child size, height, weight, or Recommended re- straint type Infants Children weighing 40 lb (18 kg) or Use a child safety seat or tod- less (generally age four or (sometimes called an dlers younger).
  • Page 19: Child Seats

    Child Safety CHILD SEATS Use a child safety seat (sometimes called an infant carrier, convertible seat, or toddler seat) for infants, toddlers or children weighing 40 pounds (18 kilograms) or less (generally age four or younger). CHILD SEAT POSITIONING WARNING: Airbags can kill or injure a child in a child seat. NEVER place a rear-facing child seat in front of an active airbag.
  • Page 20 Child Safety WARNING: Never let a passenger hold a child on his or her lap while the vehicle is moving. The passenger cannot protect the child from injury in a collision, which may result in serious injury or death. WARNING: Never use pillows, books, or towels to boost a child. They can slide around and increase the likelihood of injury or death in a collision.
  • Page 21: Booster Seats

    Child Safety Use any attachment method as indicated be- low by X LATCH LATCH Safety Safety Safety (lower (lower belt belt and belt anchors LATCH only Child straint chors only) (lower Weight Type tether anchors anchor and top tether tether anchor) chor) Rear fac-...
  • Page 22 Child Safety Booster seats should be used until you can answer YES to ALL of these questions when the child is seated without a booster seat: • Can the child sit all the way back against the vehicle seat back with knees bent comfortably at the edge of the seat cushion? •...
  • Page 23 Child Safety • High back booster seats If, with a backless booster seat, you cannot find a seating position that adequately supports your child’s head, a high back booster seat would be a better choice. Children and booster seats vary in size and shape. Choose a booster that keeps the lap belt low and snug across the hips, never up across the stomach, and lets you adjust the shoulder belt to cross the chest and rest snugly near the center of the shoulder.
  • Page 24: Installing Child Safety Seats

    Child Safety If the booster seat slides on the vehicle seat, placing a rubberized mesh sold as shelf or carpet liner under the booster seat may improve this condition. Do not introduce any item thicker than this under the booster seat.
  • Page 25 Child Safety • Insert the belt tongue into the proper buckle until you hear a snap and feel it latch. Make sure the tongue is securely fastened in the buckle. • Keep the buckle release button pointing up and away from the safety seat, with the tongue between the child seat and the release button, to prevent accidental unbuckling.
  • Page 26 Child Safety 3. While holding the shoulder and lap belt portions together, route the tongue through the child seat according to the child seat manufacturer’s instructions. Be sure the belt webbing is not twisted. 4. Insert the belt tongue into the proper buckle (the buckle closest to the direction the tongue is coming from) for that seating position until...
  • Page 27 There should be no more than 1 inch (2.5 centimeters) of movement for proper installation. Ford recommends checking with a NHTSA Certified Child Passenger Safety Technician (CPST) to make certain the child restraint is properly installed.
  • Page 28 Child Safety Using Lower Anchors and Tethers for CHildren (LATCH) WARNING: Never attach two child safety seats to the same anchor. In a crash, one anchor may not be strong enough to hold two child safety seat attachments and may break, causing serious injury or death.
  • Page 29 Child Safety The LATCH anchors are located at the rear section of the rear seat between the cushion and seat back below the symbols as shown. Follow the child seat manufacturer’s instructions to properly install a child seat with LATCH attachments. Follow the instructions on attaching child safety seats with tether straps.
  • Page 30 Child Safety Using Tether Straps Many forward-facing child safety seats include a tether strap which extends from the back of the child safety seat and hooks to an anchoring point called the top tether anchor. Tether straps are available as an accessory for many older safety seats. Contact the manufacturer of your child seat for information about ordering a tether strap, or to obtain a longer tether strap if the tether strap on your safety seat does not reach the appropriate top tether...
  • Page 31 5. Tighten the child safety seat tether strap according to the manufacturer’s instructions. If your child restraint system is equipped with a tether strap, and the child restraint manufacturer recommends its use, Ford also recommends its use. 2013 Taurus Owners Guide gf, 2nd Printing...
  • Page 32: Child Safety Locks

    Child Safety CHILD SAFETY LOCKS The childproof locks are located on the rear edge of each rear door and must be set separately for each door. When these locks are set, the rear doors cannot be opened from the inside. •...
  • Page 33: Safety Belts

    Safety Belts PRINCIPLES OF OPERATION WARNING: Always drive and ride with your seatback upright and the lap belt snug and low across the hips. WARNING: To reduce the risk of injury, make sure children sit where they can be properly restrained. WARNING: Never let a passenger hold a child on his or her lap while the vehicle is moving.
  • Page 34 Safety Belts WARNING: Safety belts and seats can become hot in a vehicle that has been closed up in sunny weather; they could burn a small child. Check seat covers and buckles before you place a child anywhere near them. WARNING: Front and rear seat occupants, including pregnant women, should wear safety belts for optimum protection in an accident.
  • Page 35: Fastening The Safety Belts

    Safety Belts FASTENING THE SAFETY BELTS The front outboard and rear safety restraints in the vehicle are combination lap and shoulder belts. 1. Insert the belt tongue into the proper buckle (the buckle closest to the direction the tongue is coming from) until you hear a snap and feel it latch.
  • Page 36 Safety Belts Pregnant women should always wear their safety belt. The lap belt portion of a combination lap and shoulder belt should be positioned low across the hips below the belly and worn as tight as comfort will allow. The shoulder belt should be positioned to cross the middle of the shoulder and the center of the chest.
  • Page 37 Safety Belts Automatic Locking Mode In this mode, the shoulder belt is automatically pre-locked. The belt will still retract to remove any slack in the shoulder belt. The automatic locking mode is not available on the driver safety belt. When to Use the Automatic Locking Mode This mode should be used any time a child safety seat, except a booster, is installed in passenger front or rear seating positions.
  • Page 38: Safety Belt Height Adjustment

    Safety Belts SAFETY BELT HEIGHT ADJUSTMENT WARNING: Position the safety belt height adjusters so that the belt rests across the middle of your shoulder. Failure to adjust the safety belt properly could reduce the effectiveness of the safety belt and increase the risk of injury in a collision. Adjust the height of the shoulder belt so the belt rests across the middle of your shoulder.
  • Page 39: Safety Belt-Minder

    Safety Belts SAFETY BELT-MINDER This feature supplements the safety belt warning function by providing additional reminders by intermittently sounding a chime and illuminating the safety belt warning light when the driver’s or front passenger’s seat is occupied and the safety belt is unbuckled. The system uses information from the front passenger sensing system to determine if a front seat passenger is present and therefore potentially in need of a warning.
  • Page 40 Safety Belts Deactivating and Activating the Belt-Minder Feature WARNING: While the design allows you to deactivate your Belt-Minder , this system is designed to improve your chances of being safely belted and surviving an accident. We recommend you leave the Belt-Minder system activated for yourself and others who may use the vehicle.
  • Page 41: Child Restraint And Safety Belt Maintenance

    Read the child restraint manufacturer’s instructions for additional inspection and maintenance information specific to the child restraint. Ford Motor Company recommends that all safety belt assemblies in use in vehicles involved in a collision be replaced. However, if the collision was minor and an authorized dealer finds that the belts do not show damage and continue to operate properly, they do not need to be replaced.
  • Page 42: Personal Safety System

    Personal Safety System PERSONAL SAFETY SYSTEM™ The Personal Safety System provides an improved overall level of frontal crash protection to front seat occupants and is designed to help further reduce the risk of airbag-related injuries. The system is able to analyze different occupant conditions and crash severity before activating the appropriate safety devices to help better protect a range of occupants in a variety of frontal crash situations.
  • Page 43 Personal Safety System Front Passenger Sensing System The front passenger sensing system can automatically turn off the passenger front airbag. The system is designed to help protect small (child size) occupants from airbag deployments when they are improperly seated or restrained in the front passenger seat contrary to proper child-seating or restraint usage recommendations.
  • Page 44: Supplementary Restraints System

    Supplementary Restraints System PRINCIPLES OF OPERATION WARNING: Airbags DO NOT inflate slowly or gently, and the risk of injury from a deploying airbag is the greatest close to the trim covering the airbag module. WARNING: All occupants of the vehicle, including the driver, should always properly wear their safety belts, even when an airbag supplemental restraint system is provided.
  • Page 45: Driver And Passenger Airbags

    Supplementary Restraints System The airbags are a supplemental restraint system and are designed to work with the safety belts to help protect the driver and right front passenger from certain upper body injuries. Airbags DO NOT inflate slowly; there is a risk of injury from a deploying airbag. Note: You will hear a loud bang and see a cloud of harmless powdery residue if an airbag deploys.
  • Page 46 Supplementary Restraints System WARNING: Airbags can kill or injure a child in a child seat. Never place a rear-facing child seat in front of an active airbag. If you must use a forward-facing child seat in the front seat, move the seat all the way back.
  • Page 47: Front Passenger Sensing System

    Supplementary Restraints System After all occupants have adjusted their seats and put on safety belts, it is very important that they continue to sit properly. A properly seated occupant sits upright, leaning against the seat back, and centered on the seat cushion, with their feet comfortably extended on the floor.
  • Page 48 Supplementary Restraints System WARNING: To reduce the risk of possible serious injury: Do not stow objects in seat back map pocket (if equipped) or hang objects off seat back if a child is in the front passenger seat. Do not place objects underneath the front passenger seat or between the seat and the center console (if equipped).
  • Page 49 Supplementary Restraints System remove the child restraint from the vehicle and reinstall the restraint following the child restraint manufacturer’s instructions. The front passenger sensing system is designed to enable (may inflate) the front passenger’s frontal airbag anytime the system senses that a person of adult size is sitting properly in the front passenger seat.
  • Page 50 Supplementary Restraints System If you think that the state of the passenger airbag status indicator lamp is incorrect, check for the following: • Objects lodged underneath the seat • Objects between the seat cushion and the center console (if equipped) •...
  • Page 51: Side Airbags

    If it is necessary to modify an advanced front airbag system to accommodate a person with disabilities, contact the Ford Customer Relationship Center at the phone number shown in the Customer Assistance section of this owner’s manual.
  • Page 52: Safety Canopy Curtain Airbags

    Supplementary Restraints System The system consists of the following: • a tag on the seat back indicating that side airbags are found on your vehicle • side airbags located inside the seat back of the driver and front passenger seats. •...
  • Page 53 Supplementary Restraints System WARNING: All occupants of the vehicle including the driver should always wear their safety belts even when an airbag SRS and curtain airbag is provided. WARNING: To reduce risk of injury, do not obstruct or place objects in the deployment path of the curtain airbag. WARNING: If the curtain airbags have deployed, the curtain airbags will not function again.
  • Page 54: Crash Sensors And Airbag Indicator

    Supplementary Restraints System restrained using a properly installed child or booster seat because it is designed to inflate downward from the headliner above the doors along the side window opening. The design and development of the Safety Canopy included recommended testing procedures that were developed by a group of automotive safety experts known as the Side Airbag Technical Working Group.
  • Page 55: Airbag Disposal

    Supplementary Restraints System The safety belt pretensioners and the airbag supplemental restraint system are designed to activate when the vehicle sustains longitudinal or lateral deceleration sufficient to cause the restraints control module to deploy a safety device or when a certain likelihood of a rollover event is detected by the rollover sensor.
  • Page 56: Keys And Remote Control

    Keys and Remote Control PRINCIPLE OF OPERATION The remote control allows you to: • remotely lock or unlock the vehicle doors • remotely open the trunk • remotely start or stop the engine (if equipped) • arm and disarm the anti-theft system (if equipped) •...
  • Page 57: Remote Control

    Keys and Remote Control Note: Make sure your vehicle is locked before leaving it unattended. Note: If you are in range, the remote control will operate if you press any button unintentionally. Intelligent Access (If Equipped) The system uses a radio frequency signal to communicate with your vehicle and authorize your vehicle to authorize your vehicle to unlock when one of the following condition are met: •...
  • Page 58 Keys and Remote Control Intelligent Access Key (If Equipped) Your vehicle may be equipped with two intelligent access keys which operate the power locks and the remote start system. The key must be in the vehicle to activate the push button start system. The intelligent access key also contains a removable mechanical key blade that can be used to unlock the...
  • Page 59 Keys and Remote Control Integrated Keyhead Transmitter 1. Twist a thin coin in the slot near the key ring to remove the battery cover (1). 2. Carefully peel up the rubber gasket (2) from the transmitter if it does not come off with the battery cover.
  • Page 60 Keys and Remote Control 5. Snap the battery cover back onto the transmitter and install the backup key. Memory Feature (If Equipped) This feature allows you to recall the driver seat, power mirrors and adjustable pedals (if equipped) memory positions. Press the unlock button on the remote control or activate intelligent access (if equipped) to recall memory.
  • Page 61 Keys and Remote Control 2. Within three seconds press the unlock button on the remote control. 3. Repeat this procedure for each additional transmitter if desired. Car Finder Press the button twice within three seconds. The horn will chirp and the turn signals will flash. It is recommended that this method be used to locate your vehicle, rather than using the panic alarm.
  • Page 62 Keys and Remote Control • two remote vehicle starts have already been attempted within the last hour • the vehicle is not in P • the vehicle battery voltage is too low • the service engine soon light is on. Remote Starting the Vehicle Note: Each button press must be done within three seconds of each other.
  • Page 63: Replacing A Lost Key Or Remote Control

    Keys and Remote Control Extending the Vehicle Run Time Repeat Steps 1 and 2 with the vehicle still running to extend the run time for another remote start duration. If you programmed the duration to last 10 minutes, the second 10 minutes will begin after what is left of the first activation time.
  • Page 64: Mykey

    MyKey PRINCIPLES OF OPERATION MyKey allows you to program keys with restricted driving modes to promote good driving habits. All but one of the keys programmed to the vehicle can be activated with these restricted modes. Any keys that have not been programmed are referred to as an administrator key or admin key which can be used to: •...
  • Page 65: Creating

    MyKey • Audio system maximum volume of 45%. A message in the audio system is displayed when attempting to exceed the limited volume. Also, the speed sensitive compensated volume feature will be disabled. • Always on setting. When this is selected, you will not be able to disable AdvanceTrac, 911 Assist or Do not disturb feature (if your vehicle is equipped with these features).
  • Page 66: Clearing

    USING MYKEY WITH REMOTE START SYSTEMS MyKey is NOT compatible with non-Ford-approved aftermarket remote start systems. If you choose to install a remote start system please see your Ford authorized dealer for a Ford-approved remote start system. 2013 Taurus Owners Guide gf, 2nd Printing...
  • Page 67: Troubleshooting, Mykey

    MyKey MYKEY TROUBLESHOOTING Condition Potential Causes • The key in the ignition does not have admin I cannot program a key. privileges. • The key in the ignition is the only admin key (there always has to be at least one admin key).
  • Page 68: Locks

    Locks LOCKING AND UNLOCKING You can use the power door lock control or the remote control to lock and unlock the vehicle. Power Door Locks The power door lock control is located on the driver and front passenger door panels. A.
  • Page 69 Locks Note: If any door or the luggage compartment is not closed, or if the hood is not closed on vehicles equipped with an anti-theft alarm or remote start, the horn will chirp twice and the lamps will not flash. Opening the Trunk Press the button twice within three seconds to open the trunk.
  • Page 70 Locks Smart Unlocks for Intelligent Access Keys (If Equipped) This feature helps to prevent you from unintentionally locking your intelligent access key inside your vehicle’s passenger compartment or rear cargo area. When you lock your vehicle using the driver or passenger power door lock control (with the door open, vehicle in park and ignition off), after you close the door the vehicle will search for an intelligent access key in the passenger compartment.
  • Page 71 Locks • the vehicle has then come to a stop and the ignition is turned off or to accessory; and • the driver door is opened within 10 minutes of the ignition being turned off or to accessory. Note: The doors will not autounlock if the vehicle has been electronically locked after the ignition is turned off and before the driver door is opened.
  • Page 72: Securicode™ Keyless Entry Keypad

    Locks Battery Saver If the courtesy lamps, dome lamps or headlamps are left on, the battery saver will shut them off 10 minutes after the ignition has been turned off. Accessory Mode Battery Saver for Intelligent Access Keys (If Equipped) If you shut off the engine and leave the ignition in the on or accessory mode, the ignition will shut off after 30 minutes.
  • Page 73 Locks Programming a Personal Entry Code To create your own personal entry code: 1. Enter the factory set code. 2. Press the 1•2 on the keypad within five seconds. 3. Enter your personal 5-digit code. Each number must be entered within five seconds of each other.
  • Page 74: Trunk Release

    Locks • pressing the unlock button on the remote control • the ignition is turned on • unlocking the vehicle using intelligent access (if equipped) Unlocking and Locking the Doors To unlock the driver’s door: enter the factory set 5-digit code or your personal code.
  • Page 75: Interior Luggage Compartment Release

    Locks INTERIOR LUGGAGE COMPARTMENT RELEASE WARNING: Keep vehicle doors and luggage compartment locked and keep keys and remote transmitters out of a child’s reach. Unsupervised children could lock themselves in the trunk and risk injury. Children should be taught not to play in vehicles. WARNING: Do not leave children, unreliable adults, or animals unattended in the vehicle.
  • Page 76: Security

    Security SECURILOCK PASSIVE ANTI-THEFT SYSTEM Note: The system is not compatible with non-Ford aftermarket remote start systems. Use of these systems may result in vehicle starting problems and a loss of security protection. Note: Metallic objects, electronic devices or a second coded key on the same key chain may cause vehicle starting issues if they are too close to the key when starting the engine.
  • Page 77 Security Store an extra programmed key away from the vehicle in a safe place to help prevent any inconveniences. See your authorized dealer to purchase additional spare or replacement keys. Programming a Spare Integrated Keyhead Transmitter Note: A maximum of eight coded keys can be programmed to your vehicle.
  • Page 78 Security Wait 20 seconds and repeat Steps 1 through 8 if the key was not successfully programmed. Take your vehicle to your authorized dealer to have the new key programmed if you are still unsuccessful. Wait 20 seconds and then repeat this procedure from Step 1 to program an additional key.
  • Page 79: Anti-Theft Alarm

    Security 7. Remove the intelligent access key from the center console pocket and press the unlock button on the newly programmed intelligent access key to exit programming mode. 8. Verify that the remote entry functions operate (press lock then unlock, making sure you end in unlock) and that the vehicle starts with new intelligent access key.
  • Page 80 Security Disarming the Alarm To disarm the alarm, do any of the following: • Press the power door unlock button within the 20-second pre-armed mode. • Press the unlock button on the remote control. • Unlock the doors with the keyless entry pad. •...
  • Page 81: Steering Wheel

    Steering Wheel ADJUSTING THE STEERING WHEEL WARNING: Do not adjust the steering wheel when your vehicle is moving. Note: Make sure that you are sitting in the correct position. See Sitting in the Correct Position in the Seats chapter. 1. Unlock the steering column. 2.
  • Page 82 Steering Wheel Use the control on the side of the steering column to adjust the position. To adjust: • tilt: use the top or bottom of the control • telescope: use the front or rear of the control. Easy Entry and Exit Feature The column will move to the full up and in position when the ignition is turned off and this feature is activated through the information display.
  • Page 83: Steering Wheel Controls

    Steering Wheel AUDIO CONTROL SEEK: Press to select the next or previous stored preset or track. Press and hold to select the next or previous frequency or seek through a track. MEDIA: Press repeatedly to scroll through available audio modes. MUTE: Press to silence the radio.
  • Page 84 Steering Wheel CRUISE CONTROL Type 1 Type 2 CNCL See the Cruise Control chapter for information on this feature. INFORMATION DISPLAY CONTROL Refer to the Information Displays chapter for more information. 2013 Taurus Owners Guide gf, 2nd Printing USA (fus)
  • Page 85 Steering Wheel Cluster Display Control Features If equipped with: MyFord system: This control functions the same as the center control on the faceplate. Refer to MyFord system in the Audio Systems chapter. MyFord Touch: Use this control to adjust the right side of the cluster display.
  • Page 86: Pedals

    Pedals ADJUSTABLE PEDALS (IF EQUIPPED) WARNING: Never adjust the accelerator and brake pedal with feet on the pedals while the vehicle is moving. The control is located on the left side of the steering column. Press and hold the appropriate control to move the pedals. A.
  • Page 87: Wipers And Washers

    Wipers and Washers WINDSHIELD WIPERS Note: Fully defrost the windshield in icy conditions before turning on the windshield wipers. Rotate the end of the control away from you to increase the speed of the wipers. Rotate toward you to decrease the speed of the wipers. RAIN-SENSING WIPERS (IF EQUIPPED) Note: Wet road conditions may result in inconsistent or unexpected wiping or smearing.
  • Page 88 Wipers and Washers Press the end of the stalk to activate the washer. • A brief press causes a single wipe without washer fluid. • A quick press and hold causes the wipers to swipe three times with washer fluid. •...
  • Page 89: Lighting

    Lighting LIGHTING CONTROL A. Off B. Parking lamps, instrument panel lamps, license plate lamps and tail lamps C. Headlamps High Beams • Push the lever toward the instrument panel to activate. • Push the lever toward the instrument panel again or pull the lever towards you to deactivate.
  • Page 90: Autolamps

    Lighting AUTOLAMPS WARNING: In severe weather conditions, it may be necessary to switch your headlamps on manually. Note: If the vehicle is equipped with autolamps, it will have the windshield wiper rainlamp feature. When the windshield wipers are turned to low- or high-speed wiping during daylight, and the headlamp control is in the autolamp position, the exterior lamps will turn on after a brief delay and will remain on until the wipers are turned off.
  • Page 91: Daytime Running Lamps

    Lighting 4. Turn the ignition on. 5. Turn the ignition off. 6. Turn the lighting control to the autolamp position. The headlamps and parking lamps will turn on. 7. Turn the lighting control to the off position when the desired delay time has been reached.
  • Page 92 Lighting Note: If it appears that automatic control of the high beams is not functioning properly, check the windshield in front of the camera for blockage. A clear view of the road is required for proper system operation. Any windshield damage in the area of the camera field-of-view should be repaired.
  • Page 93: Direction Indicators

    Lighting Activating the system Switch the system on within the information display. See Information displays. Turn the lighting control to the autolamps position. Manually overriding the system When the automatic control has activated high beams, pushing or pulling the stalk will provide a temporary override to low beam.
  • Page 94: Interior Lamps

    Lighting Note: Tap the lever up or down to make the direction indicators flash only three times to indicate a lane change. INTERIOR LAMPS Front row map lamps The map lamps are located on the overhead console. Press the outer edge of the clear lens to turn on the lamps.
  • Page 95: Windows And Mirrors

    Windows and Mirrors POWER WINDOWS WARNING: Do not leave children unattended in the vehicle and do not let children play with the power windows. They may seriously injure themselves. WARNING: When closing the power windows, you should verify they are free of obstructions and make sure that children and pets are not in the proximity of the window openings.
  • Page 96: Exterior Mirrors

    Windows and Mirrors Bounce-Back (One-Touch Up or Down Windows Only) The window will stop automatically while closing and reverse some distance if there is an obstacle in the way. Overriding the Bounce-Back Feature Pull up the window switch and hold within two seconds of the window reaching the bounce-back position.
  • Page 97 Windows and Mirrors A. Left mirror B. Adjustment control C. Right mirror To adjust your mirrors: 1. Press the button to select the mirror you want to adjust. An indicator light on the button will illuminate. 2. Use the adjustment control to adjust the position of the mirror. 3.
  • Page 98: Interior Mirrors

    Windows and Mirrors The image of the approaching vehicle is small and near the inboard edge of the main mirror when it is at a distance. The image becomes larger and begins to move outboard across the main mirror as the vehicle approaches (A).
  • Page 99: Sun Visors

    Windows and Mirrors The mirror will dim automatically to reduce glare when bright lights are detected from behind your vehicle. It will automatically return to normal reflection when you select reverse gear to make sure you have a clear view when backing up. SUN VISORS Slide-On-Rod Rotate the visor toward the side...
  • Page 100: Sunshade

    Windows and Mirrors SUNSHADE (IF EQUIPPED) The power rear sunshade covers the rear window of the vehicle. The control is located in the center console access bin. Press the control to move the sunshade up or down. Note: Do not try to manually move the sunshade. The sunshade has a one-touch down feature.
  • Page 101 Windows and Mirrors Opening and Closing the Moonroof Press and release the SLIDE control to open the moonroof. TILT SLIDE Pull and release the SLIDE control to close the moonroof. Bounce-Back The moonroof automatically stops closing and reverses if an obstacle is detected while closing.
  • Page 102: Instrument Cluster

    Instrument Cluster GAUGES Type 1 Cluster shown in standard measure – metric clusters similar. A. Tachometer B. Information display. See Information displays for more information. C. Speedometer D. Fuel gauge Fuel gauge Indicates approximately how much fuel is left in the fuel tank (when the ignition is on).
  • Page 103: Warning Lamps And Indicators

    Instrument Cluster Type 2 Cluster shown in standard measure – metric clusters similar. A. Information display. See Information displays for more information. B. Speedometer C. Infotainment display. See MyFord Touch™ for more information. WARNING LAMPS AND INDICATORS These indicators can alert you to a vehicle condition that may become serious enough to cause expensive repairs.
  • Page 104 Instrument Cluster • Engaged (green light): Illuminates when the adaptive cruise control system is engaged. Turns off when the speed control system is disengaged. Stability Control System Displays when the AdvanceTrac /Traction control is active. If the light remains on, have the system serviced immediately. Stability Control System Off Illuminates when AdvanceTrac /Traction control has been disabled by the driver.
  • Page 105 Instrument Cluster WARNING: Driving a vehicle with the brake system warning light on is dangerous. A significant decrease in braking performance may occur. It will take you longer to stop the vehicle. Have the vehicle checked by your authorized dealer as soon as possible. Driving extended distances with the parking brake engaged can cause brake failure and the risk of personal injury.
  • Page 106 Instrument Cluster High beams Illuminates when the high-beam headlamps are on. Low fuel (RTT) Illuminates when the fuel level in the fuel tank is at or near empty. Low tire pressure warning Illuminates when your tire pressure is low. If the light remains on at start up or while driving, the tire pressure should be checked.
  • Page 107 Instrument Cluster Service engine soon The service engine soon indicator light illuminates when the ignition is first turned to the on position to check the bulb and to indicate whether the vehicle is ready for Inspection/Maintenance (I/M) testing. Normally, the “service engine soon” light will stay on until the engine is cranked, then turn itself off if no malfunctions are present.
  • Page 108: Audible Warnings And Indicators

    Instrument Cluster Turn signal Illuminates when the left or right turn signal or the hazard warning flasher is turned on. If the indicators stay on or flash faster, check for a burned out bulb. AUDIBLE WARNINGS AND INDICATORS Key In Ignition Warning Chime Sounds when the key is left in the ignition in the off or accessory position and the driver’s door is opened.
  • Page 109: Information Displays

    GENERAL INFORMATION WARNING: Driving while distracted can result in loss of vehicle control, accident and injury. Ford strongly recommends that drivers use extreme caution when using any device or feature that may take their focus off the road. Your primary responsibility is the safe operation of the vehicle.
  • Page 110 Information Displays †Trip 1 / 2 Trip Odometer Trip Time Fuel Used Compass (located in lower line of display). Note: this will also display in other menus. Total Odometer (located in lower line of display). Note: this will also display in other menus. †See Trip and fuel economy computer later in this section for more information.
  • Page 111 Information Displays Settings Driver Assist Traction Control Blind Spot Collision Warning Sensitivity High, Normal or Chimes (not selectable if using a MyKey) Warning (not selectable if using a MyKey) Cross Traffic Cruise Control Adaptive or Normal Rear Park Aid Display Language Select your applicable language Units...
  • Page 112 Information Displays Settings Convenience Auto Highbeam Autolamp Delay Off or number of seconds Compass Display Calibrate (if Hold OK to equipped) Calibrate Zone (1–15) DTE Calculation Normal or Towing Easy Entry/Exit Locks Autolock Autounlock Remote All Doors or Unlocking Driver First Oil life Reset Set XXX% Remote Start...
  • Page 113: Trip Computer

    Information Displays Settings MyKey Create MyKey Hold OK to Create MyKey 911 Assist Always On or User Selectable Traction Control Always On or User Selectable Max Speed 80 MPH (130 km/h) or Off Speed Minder 45 mph (75 km/h), 55 mph (90 km/h), 65 mph (105 km/h) or Volume Limiter Clear MyKeys...
  • Page 114 Information Displays Inst Fuel Econ Shows instantaneous fuel usage. Average Fuel Indicates the average fuel consumption since the function was last reset. Compass (If Equipped) Displays the vehicle’s heading direction. To calibrate the compass: Enter the compass menu and select Calibrate. Follow the prompts.
  • Page 115 Information Displays Main menu From the main menu bar on the left side of the information display, you can choose from the following categories: Display Mode Trip 1 & 2 Fuel Economy Settings Information Scroll up/down to highlight one of the categories, then press the right arrow key or OK to enter into that category.
  • Page 116 Information Displays Display mode †Option 1 Option 2 Option 3 †Option 4 XXX mi (km) to empty Fuel gauge Bar tachometer Round tachometer Engine coolant temp gauge Total odometer (lower left corner) †Vehicles with Intelligent AWD only. You can choose to have only the fuel gauge show in this mode.
  • Page 117 Information Displays • Intelligent AWD (if equipped): displays power distribution between the front and rear wheels. More power to either front or rear wheels will be displayed by more area filled in. Trip 1 & 2 Choose between the standard or enhanced trip display. †Enhanced Trip 1 &...
  • Page 118 Information Displays Inst Fuel XX. Min Fuel Fuel Economy Economy History Instantaneous fuel usage †Fuel usage over a 5, 10, or 30 minute time span Total odometer (lower left corner) Press and hold OK to reset the currently displayed fuel usage information.
  • Page 119 Information Displays Vehicle Auto Highbeam On / Off Autolamp Delay Off or number of seconds Easy Entry/Exit On / Off DTE Calculation Normal / Towing Locks Autolock On / Off Autounlock On / Off Remote All doors / Driver’s door Unlocking Oil Life Reset Set to XXX %...
  • Page 120 Information Displays *MyKey Create MyKey Press and hold OK to create MyKey 911 Assist Always On / User Selectable Traction Control Always On / User Selectable Max Speed Choose desired speed or off Speed Minder Choose desired speed or off Volume Limiter On / Off Do Not Disturb...
  • Page 121: Information Messages

    Information Displays MyKey Admin Keys (Number of admin keys) MyKeys (Number of MyKeys programmed) MyKey Miles (km) (Distance traveled using a programmed MyKey) Driver Alert Displays the associated driver alert graphic. System Check All active warnings will display first if applicable. The system check menu may appear different based upon equipment options and current vehicle status.
  • Page 122 Information Displays Adaptive Cruise Action / Description Control Messages Adaptive Cruise Displayed when a radar malfunction is Malfunction preventing the ACC from engaging. Adaptive Cruise Not Displayed when conditions exist such that the Available adaptive cruise cannot function properly. Adaptive Cruise Not Displayed when the radar is blocked because Available Sensor of poor radar visibility due to bad weather or...
  • Page 123 Information Displays AWD Messages Action / Description AWD Off Displayed when the AWD system has been automatically disabled to protect itself. This is caused by operating the vehicle with the compact spare tire installed or if the system is overheating. The AWD system will resume normal function and clear this message after driving a short distance with the road tire re-installed or after the system is allowed to...
  • Page 124 Information Displays Battery and Action / Description Charging System Messages Check Charging Displayed when the charging system needs System servicing. If the warning stays on or continues to come on, contact your authorized dealer as soon as possible. Turn Power Off to Displayed when the battery management Save Battery system determines that:...
  • Page 125 Information Displays BLIS Messages Action / Description Cross Traffic System Displayed when a fault with the cross traffic Fault alert system has occurred. Contact your authorized dealer as soon as possible. Vehicle Coming From Displayed when the blind spot information system with cross traffic alert (CTA) system is operating and senses a vehicle.
  • Page 126 Information Displays Collision Warning Action / Description System Messages Collision Warn Not Displayed when there is a system malfunction Available with the collision warning system. The system will be disabled. Contact your authorized dealer as soon as possible. Collision Warn Not Displayed when the collision warning system Available Sensor radar is blocked because of poor radar...
  • Page 127 Information Displays Keys and Intelligent Action / Description Access Messages No Key Detected Displayed if the intelligent access key is not detected by the system in the following three scenarios: •When the start/stop button is pressed in an attempt to either start the engine or cycle through the ignition states.
  • Page 128 Information Displays Maintenance Action / Description Messages LOW Engine Oil Stop the vehicle as soon as safely possible, Pressure turn off the engine. Check the oil level. If the warning stays on or continues to come on with your engine running, contact your authorized dealer as soon as possible.
  • Page 129 Information Displays MyKey Messages Action / Description Vehicle Near MyKey Displayed when a MyKey is in use and the Top Speed MyKey speed limit is on and the vehicle speed is near the selected top speed. Check Speed Drive Displayed when a MyKey is in use and the Safely optional setting is on and the vehicle exceeds a preselected speed.
  • Page 130 Information Displays Tire Messages Action / Description Low Tire Pressure Displays when one or more tires on your vehicle have low tire pressure. Tire Pressure Monitor Displays when the tire pressure monitoring Fault system is malfunctioning. If the warning stays on or continues to come on, contact your authorized dealer.
  • Page 131: Audio System

    (12 cm) audio compact discs only. Due to technical incompatibility, certain recordable and re-recordable compact discs may not function correctly when used in Ford CD players. Note: CDs with homemade paper (adhesive) labels should not be inserted into the CD player as the label may peel and cause the CD to become jammed.
  • Page 132 Audio System Always handle discs by their edges only. Clean the disc with an approved CD cleaner only, wiping from the center of the disc toward the edge. Do not clean in a circular motion. Do not expose discs to direct sunlight or heat sources for extended periods of time.
  • Page 133: Myford System

    MyFord SYSTEM WARNING: Driving while distracted can result in loss of vehicle control, accident and injury. Ford strongly recommends that you use extreme caution when using any device or feature that may take your focus off the road. Your primary responsibility is the safe operation of the vehicle.
  • Page 134 Audio System 1. Press RADIO and select a frequency. 2. Tune to the desired station. 3. Press and hold one of the preset buttons. The system momentarily mutes as confirmation the station is stored. D. Function buttons: Access the functions shown on-screen by pressing the corresponding audio buttons directly beneath them.
  • Page 135 Audio System O. SIRIUS: Access SIRIUS satellite radio features. Menu Structure Note: Depending on your system, some options may appear slightly different, not at all or on-screen and able to be selected using the function buttons. Press MENU. Press the up and down arrow buttons to scroll through the options (if active).
  • Page 136 Audio System SIRIUS Alerts Select to enable/disable an alert for a song, artist or team. The system alerts you when the selection is playing on another channel. Save up to 20 alerts. Use your PIN to unlock previously locked Unlock All Stations stations.
  • Page 137 AM/FM/CD PREMIUM AUDIO SYSTEM WARNING: Driving while distracted can result in loss of vehicle control, accident and injury. Ford strongly recommends that you use extreme caution when using any device or feature that may take your focus off the road. Your primary responsibility is the safe operation of the vehicle.
  • Page 138 Audio System C. TUNE +/TUNE - : • In radio mode, you can search the frequency band in individual increments. • In SIRIUS mode, you can find the next or previous available SIRIUS satellite station. D. Power and Volume: Press the power control to turn the system on and off.
  • Page 139: Auxiliary Input Jack

    Audio System WARNING: Driving while distracted can result in loss of vehicle control, accident and injury. Ford strongly recommends that you use extreme caution when using any device or feature that may take your focus off the road. Your primary responsibility is the safe operation of the vehicle.
  • Page 140 Audio System WARNING: For safety reasons, do not connect or adjust the settings on your portable music player while the vehicle is moving. WARNING: Store the portable music player in a secure location, such as the center console or the glove box, when the vehicle is in motion.
  • Page 141: Usb Port

    USB PORT WARNING: Driving while distracted can result in loss of vehicle control, accident and injury. Ford strongly recommends that you use extreme caution when using any device or feature that may take your focus off the road. Your primary responsibility is the safe operation of the vehicle.
  • Page 142 Note: SIRIUS reserves the unrestricted right to change, rearrange, add or delete programming including canceling, moving or adding particular channels, and its prices, at any time, with or without notice to you. Ford Motor Company shall not be responsible for any such programming changes.
  • Page 143 Audio System Satellite Radio Electronic Serial Number (ESN) You need your ESN to activate, modify or track your satellite radio account. When in satellite radio mode, you can view this number by pressing SIRIUS and memory preset 1 at the same time. Troubleshooting SIRIUS Troubleshooting Tips Radio Display...
  • Page 144 Audio System SIRIUS Troubleshooting Tips Radio Display Condition Possible Action Call SIRIUS Satellite service has Call SIRIUS at 1–888–539–7474 been deactivated by 1–888–539–7474 to SIRIUS Satellite reactivate or resolve Radio. subscription issues. No Channels Available All the channels in the Using the channel selected category are guide, unlock or...
  • Page 145: Climate Control

    Climate Control MANUAL HEATING AND AIR CONDITIONING SYSTEM A. Fan speed control: Controls the volume of air circulated in your vehicle. Turn to select the desired fan speed or switch off. If you switch the fan off, the windshield may fog up. B.
  • Page 146: Dual Automatic Temperature Control

    Climate Control H. Air distribution control: Press to set the air distribution to a position listed below: Distributes air through the windshield defroster vents, demister vents and floor vents. Distributes air through the instrument panel vents. Distributes air through the instrument panel vents, floor vents, and demister vents.
  • Page 147 Climate Control A. Power/Driver temperature control: Press to turn the climate control system on and off. When the system is off, outside air is prevented from entering the vehicle. Turn to increase or decrease the air temperature for the driver side of the vehicle.
  • Page 148 Climate Control F. PASS TEMP: Press and turn to increase or decrease the air temperature on the passenger side of the vehicle. G. MAX A/C: Distributes recirculated air through the instrument panel vents to cool the vehicle. This position is more economical and efficient than normal A/C.
  • Page 149 Climate Control A. Defrost: Distributes air through the windshield defroster vents and demister vents. This setting can also be used to defog and clear the windshield of a thin covering of ice. B. Rear defrost: Turns the heated windows and mirrors on and off. See Heated windows and mirrors later in this chapter for more information.
  • Page 150 Climate Control J. Driver temperature control: Press + or - to increase or decrease the air temperature inside the vehicle. This control also adjusts the passenger side temperature when dual zone operation is disengaged. DUAL AUTOMATIC TEMPERATURE CONTROL SYSTEM (WITH MyTemp) Note: You can switch temperature units between Fahrenheit and Celsius.
  • Page 151 Climate Control D. Recirculated air: Press to switch between outside air and recirculated air. When the LED on the button is lit, the air currently in the passenger compartment is being recirculated. Using recirculated air can reduce the time needed to cool the interior and reduce unwanted odors from entering your vehicle.
  • Page 152 Climate Control • To improve the A/C cool down, drive with the windows slightly open for 2-3 minutes after start-up or until the vehicle has been aired out. • A small amount of air may be felt from the floor vent regardless of the air distribution setting that is selected.
  • Page 153: Rear Window Defroster

    Climate Control During extreme high ambient temperatures when idling stationary for extended periods of time in gear, it is recommended to run the A/C in the MAX A/C mode, adjust the blower fan speed to the lowest setting and put the vehicle’s transmission into position P (vehicles equipped with an automatic transmission) to continue to receive cool air from your A/C system.
  • Page 154: Cabin Air Filter

    Climate Control CABIN AIR FILTER Note: A cabin air filter must be installed at all times to prevent foreign objects from entering the system. Running the system without a filter in place could result in degradation or damage to the system. Your vehicle is equipped with a cabin air filter, which is located just in front of the windshield under the cowl grille on the passenger side of the vehicle.
  • Page 155 Climate Control Manual Climate Systems In hot weather, the climate control system is set to MAX A/C. In moderate weather, the system either heats or cools (based on previous settings). The rear defroster and heated mirrors are not automatically turned on. In cold weather, maximum heat is provided in floor/defrost mode.
  • Page 156: Seats

    Seats SITTING IN THE CORRECT POSITION WARNING: Sitting improperly out of position or with the seat back reclined too far can take off weight from the seat cushion and affect the decision of the passenger sensing system, resulting in serious injury or death in a crash. Always sit upright against your seat back, with your feet on the floor.
  • Page 157: Head Restraints

    Seats Make sure that your driving position is comfortable and that you can maintain full control of your vehicle. HEAD RESTRAINTS WARNING: To minimize the risk of neck injury in the event of a crash, the driver and passenger occupants should not sit in and/or operate the vehicle, until the head restraint is placed in its proper position.
  • Page 158 Seats Rear seat center head restraint The head restraints consist of: A. An energy absorbing head restraint B. Two steel stems C. Guide sleeve adjust/release button D. Guide sleeve unlock/remove button • Raise: Pull up on the head restraint (A). •...
  • Page 159: Front Manual Seats

    Seats • Remove: Simultaneously press and hold both unlock/remove buttons (C), then pull up on the head restraint. • Reinstall: Align the steel stems into the guide sleeves and push the head restraint down until it locks. Tilting Head Restraints (If Equipped) The front head restraints may have a tilting feature for extra comfort.
  • Page 160: Power Seats

    Seats Moving the seats backward and forward WARNING: Before returning the seat back to its original position, make sure that cargo or any objects are not trapped behind the seat back. After returning the seat back to its original position, pull on the seat back to ensure that it has fully latched. An unlatched seat may become dangerous in the event of a sudden stop or collision.
  • Page 161 Seats WARNING: Before returning the seatback to its original position, make sure that cargo or any objects are not trapped behind the seatback. Note: On vehicles with memory seats, to prevent damage to the seat, the power seats are designed to set a stopping position just short of the end of the seat track.
  • Page 162 Seats Power lumbar (if equipped) Multi-Contour Active Motion™ Seat (If Equipped) Note: The massage system will turn off after 20 minutes. Note: The engine must be running or the vehicle must be in accessory mode to activate the seats. Note: Allow a few seconds for any selection to activate. The seatback and cushion massage cannot function at the same time.
  • Page 163: Memory Function

    Seats • Power seat controls (C) We recommend first selecting the lumbar to the desired setting and then selecting the back or cushion massage setting. MEMORY FUNCTION (if equipped) The memory control, located on the side seat panel, allows positioning recall of the: •...
  • Page 164: Heated Seats

    Seats Recalling a memory position with the remote control The memory positions are also recalled when you press unlock on your remote control (if the transmitter is programmed to a memory position) or, when you enter a valid personal entry code that is programmed to a memory position.
  • Page 165: Heated And Cooled Seats

    Seats The heated seats will only function when the ignition is in the on position. Note: Do not do the following: • Place heavy objects on the seat • Operate the seat heater if water or any other liquid is spilled on the seat.
  • Page 166 Seats To operate the heated seats: Press the heated seat symbol/button to cycle through the various heat settings and off. Warmer settings are indicated by more indicator lights. If the engine falls below 350 rpm while the heated seats are on, the feature will turn itself off and will need to be reactivated.
  • Page 167 Seats To remove an air filter: 1. Turn the vehicle off. 2. Push up on the outside rigid edge of the filter and rotate counterclockwise once the tabs are released, then remove the filter. To install a filter: 1. First, position the filter in its housing making sure that the far forward end is all the way up in the housing.
  • Page 168 Seats • Lower: Pull the strap located on the outboard side of the seat back to release it, and then fold seat back down. • Raise: Pull up on the seat and push it back until you hear it latch into place. REAR SEAT ARMREST (IF EQUIPPED) WARNING: Use only soft cups in the cupholder.
  • Page 169 Seats Rear Heated Seats (if equipped) WARNING: Persons who are unable to feel pain to the skin because of advanced age, chronic illness, diabetes, spinal cord injury, medication, alcohol use, exhaustion, or other physical conditions, must exercise care when using the seat heater. The seat heater may cause burns even at low temperatures, especially if used for long periods of time.
  • Page 170: Universal Garage Door Opener (If Equipped)

    170 Universal Garage Door Opener (If Equipped) HOMELINK WIRELESS CONTROL SYSTEM (IF EQUIPPED) WARNING: Make sure that the garage door and security device are free from obstruction when you are programming. Do not program the system with the vehicle in the garage. WARNING: Do not use the system with any garage door opener that does not have the safety stop and reverse feature as required by U.S.
  • Page 171 Universal Garage Door Opener (If Equipped) 171 1. Switch the ignition on. 2. Hold the garage door hand-held transmitter 1–3 inches (2–8 centimeters) away from the button on the sun visor you want to program. Note: During programming, the hand-held transmitter may stop transmitting.
  • Page 172 172 Universal Garage Door Opener (If Equipped) For questions or comments, please contact HomeLink at www.homelink.com or 1-800-355-3515. Erasing the Function Button Codes Note: You cannot erase individual buttons. 1. Press and hold the outer two function buttons simultaneously for approximately 20 seconds until the indicator lights above the buttons flash rapidly.
  • Page 173 Universal Garage Door Opener (If Equipped) 173 A. Red LED B. Green LED 1. Press and hold one of the buttons on the hand-held transmitter for 10 seconds. The LED light will change from green to green and red. 2. Press the same button twice to confirm the change to Programming mode.
  • Page 174 174 Universal Garage Door Opener (If Equipped) Programming HomeLink to the Genie Intellicode garage door opener motor Note: You may need a ladder to access the garage door opener motor. To program HomeLink to the garage door opener motor. 1. Press and hold the PROGRAM button on the garage door opener motor until both blue LED’s turn on.
  • Page 175 Universal Garage Door Opener (If Equipped) 175 FCC and RSS-210 Industry Canada Compliance This device complies with Part 15 of the FCC Rules and with RSS-210 of Industry Canada. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
  • Page 176: Auxiliary Power Points

    Auxiliary Power Points AUXILIARY POWER POINTS WARNING: Do not plug optional electrical accessories into the cigarette lighter socket (if equipped). Improper use of the lighter can cause damage not covered by your warranty, and can result in fire or serious injury. Note: If used when the engine is not running, the battery will discharge.
  • Page 177: Storage Compartments

    Storage Compartments CENTER CONSOLE WARNING: Use only soft cups in the cupholder. Hard objects can injure you in a collision. Note: The appearance and features of the center console may be different than shown based on your vehicle’s option level. Your vehicle may be equipped with a variety of console features.
  • Page 178: Overhead Console

    Storage Compartments OVERHEAD CONSOLE The appearance of the overhead console will vary according to your option package. Press near the rear edge of the door to open it. 2013 Taurus Owners Guide gf, 2nd Printing USA (fus)
  • Page 179: Starting And Stopping The Engine

    Starting and Stopping the Engine GENERAL INFORMATION WARNING: Extended idling at high engine speeds can produce very high temperatures in the engine and exhaust system, creating the risk of fire or other damage. WARNING: Do not park, idle, or drive your vehicle on dry grass or other dry ground cover.
  • Page 180: Keyless Starting

    Starting and Stopping the Engine A. Off: The ignition is off. B. Accessory: Allows some electrical accessories to operate while the engine is not running. C. On: All electrical circuits are operational. Warning lamps and indicators are illuminated. This is the key position when driving. D.
  • Page 181 Starting and Stopping the Engine To turn the ignition off, press the start button when the vehicle is on or the engine is running. The system does not function if: • the key frequencies are jammed. • the key battery is dead. If you are unable to start your vehicle, do the following: 1.
  • Page 182 Starting and Stopping the Engine Once the vehicle has started, the vehicle remains running until being turned off by the start button, even if the passive key is no longer found in the vehicle. Whenever a door is opened and then closed while the vehicle is running, the system searches for a passive key inside the vehicle.
  • Page 183: Engine Block Heater

    Starting and Stopping the Engine Guarding Against Exhaust Fumes WARNING: If you smell exhaust fumes inside your vehicle, have this checked immediately. Do not drive your vehicle if you smell exhaust fumes. Carbon monoxide is present in exhaust fumes. Take precautions to avoid its dangerous effects.
  • Page 184 Starting and Stopping the Engine • Make sure that when in operation, the extension cord plug and the heater cord plug connections are free and clear of water. This could cause an electric shock or fire. • Make sure your vehicle is parked in a clean area, clear of combustibles.
  • Page 185: Fuel And Refueling

    Fuel and Refueling SAFETY PRECAUTIONS WARNING: Do not overfill the fuel tank. The pressure in an overfilled tank may cause leakage and lead to fuel spray and fire. WARNING: The fuel system may be under pressure. If you hear a hissing sound near the fuel filler door (Easy Fuel “no cap” fuel system), do not refuel until the sound stops.
  • Page 186: Fuel Quality

    Fuel and Refueling • Avoid getting fuel liquid in your eyes. If fuel is splashed in the eyes, remove contact lenses (if worn), flush with water for 15 minutes and seek medical attention. Failure to seek proper medical attention could lead to permanent injury.
  • Page 187: Running Out Of Fuel

    Fuel and Refueling Octane recommendations • 3.5L V6 engine (R+M)/2 METHOD “Regular” unleaded gasoline with a pump (R+M)/2 octane rating of 87 is recommended. Some stations offer fuels posted as “Regular” with an octane rating below 87, particularly in high altitude areas. Fuels with octane levels below 87 are not recommended.
  • Page 188 Fuel and Refueling Refilling with a Portable Fuel Container WARNING: Do not insert the nozzle of portable fuel containers or aftermarket funnels into the capless fuel system. This could damage the fuel system and its seal, and may cause fuel to run onto the ground instead of filling the tank, which could result in serious personal injury.
  • Page 189: Refueling

    Fuel and Refueling REFUELING WARNING: Fuel vapor burns violently and a fuel fire can cause severe injuries. To help avoid injuries to you and others: • Read and follow all the instructions on the pump island; • Turn off your engine when you are refueling; •...
  • Page 190: Fuel Consumption

    Fuel and Refueling 5. After you are done pumping fuel, slowly remove the fuel filler nozzle—allow about ten seconds after pumping fuel before removing the fuel filler nozzle. This allows residual fuel to drain back into the fuel tank and not spill onto the vehicle. 6.
  • Page 191 Fuel and Refueling • Use the same fill rate (low–medium–high) each time the tank is filled. • Allow no more than two automatic click–offs when filling. Results are most accurate when the filling method is consistent. Calculating fuel economy Do not measure fuel economy during the first 1,000 miles (1,600 km) of driving (this is your engine’s break-in period);...
  • Page 192 If other than Ford, Motorcraft or Ford-authorized parts are used for maintenance replacements or for service of components affecting emission control, such non-Ford parts should be equivalent to genuine Ford Motor Company parts in performance and durability.
  • Page 193 Fuel and Refueling When the service engine soon indicator illuminates, the OBD-II system has detected a malfunction. Temporary malfunctions may cause the service engine soon indicator to illuminate. Examples are: 1. The vehicle has run out of fuel—the engine may misfire or run poorly. 2.
  • Page 194 Fuel and Refueling If the vehicle’s engine or transmission has just been serviced, or the battery has recently run down or been replaced, the OBD-II system may indicate that the vehicle is not ready for I/M testing. To determine if the vehicle is ready for I/M testing, turn the ignition key to the on position for 15 seconds without cranking the engine.
  • Page 195: Transmission

    Transmission AUTOMATIC TRANSMISSION WARNING: Always set the parking brake fully and make sure the gearshift is latched in P (Park). Turn the ignition to the off position and remove the key whenever you leave your vehicle. Your vehicle has been designed to improve fuel economy by reducing fuel usage while coasting or decelerating.
  • Page 196 Transmission S (Sport) Moving the gearshift lever to S (Sport): • Provides additional grade (engine) braking and extends lower gear operation to enhance performance for uphill climbs, hilly terrain or mountainous areas. This will increase engine RPM during engine braking. •...
  • Page 197 Transmission If your vehicle is equipped with paddles on the steering wheel: • Pull the left paddle (–) to downshift the transmission. • Pull the right paddle (+) to upshift the transmission. Upshift to the recommended shift speeds according to the following chart: Upshifts when accelerating (recommended for best fuel economy)
  • Page 198 Transmission WARNING: If the parking brake is fully released, but the brake warning lamp remains illuminated, the brakes may not be working properly. See your authorized dealer as soon as possible. Note: See your authorized dealer as soon as possible if this procedure is used.
  • Page 199 Transmission Automatic Transmission Adaptive Learning This feature is designed to increase durability and provide consistent shift feel over the life of the vehicle. A new vehicle or transmission may have firm shifts, soft shifts or both. This operation is considered normal and will not affect function or durability of the transmission.
  • Page 200: All-Wheel Drive (If Equipped)

    All-Wheel Drive (If Equipped) Using your All Wheel Drive (AWD) system AWD uses all four wheels to power the vehicle. This increases traction, enabling you to drive over terrain and road conditions that a conventional two-wheel drive vehicles cannot. The AWD system is active all the time and requires no input from the operator.
  • Page 201 All-Wheel Drive (If Equipped) condition may be indicated by an AWD Off message in the information display. If there is an AWD Off message in the message center from using the spare tire, this indicator should turn off after reinstalling the repaired or replaced normal road tire and cycling the ignition off and on.
  • Page 202 All-Wheel Drive (If Equipped) If Your Vehicle Gets Stuck WARNING: Always set the parking brake fully and make sure the gearshift is latched in P (Park). Turn the ignition to the lock position and remove the key whenever you leave your vehicle. WARNING: If the parking brake is fully released, but the brake warning lamp remains illuminated, the brakes may not be working properly.
  • Page 203 All-Wheel Drive (If Equipped) Sand When driving over sand, try to keep all four wheels on the most solid area of the trail. Avoid reducing the tire pressures but shift to a lower gear and drive steadily through the terrain. Apply the accelerator slowly and avoid spinning the wheels.
  • Page 204 Ford Motor Company joins the U.S. Forest Service and the Bureau of Land Management in encouraging you to help preserve our national forest and other public and private lands by “treading lightly.”...
  • Page 205 All-Wheel Drive (If Equipped) Driving on Snow and Ice WARNING: If you are driving in slippery conditions that require tire chains or cables, then it is critical that you drive cautiously. Keep speeds down, allow for longer stopping distances and avoid aggressive steering to reduce the chances of a loss of vehicle control which can lead to serious injury or death.
  • Page 206 Any modifications to a vehicle that raise the center of gravity can make it more likely the vehicle will rollover as a result of a loss of control. Ford Motor Company recommends that caution be used with any vehicle equipped with a high load or device (such as ladder or luggage racks).
  • Page 207: Brakes

    Brakes GENERAL INFORMATION Note: Occasional brake noise is normal. If a metal-to-metal, continuous grinding or continuous squeal sound is present, the brake linings may be worn-out and should be inspected by an authorized dealer. If the vehicle has continuous vibration or shudder in the steering wheel while braking, the vehicle should be inspected by an authorized dealer.
  • Page 208: Hints On Driving With Anti-Lock Brakes

    Brakes If the ABS is disabled, normal braking is still effective. If the brake warning lamp illuminates with the parking brake released, have your brake system serviced immediately. HINTS ON DRIVING WITH ANTI-LOCK BRAKES When the system is operating, the brake pedal will pulse and may travel further.
  • Page 209: Traction Control

    Traction Control PRINCIPLES OF OPERATION The traction control system helps avoid drive wheel spin and loss of traction. If your vehicle begins to slide, the system applies the brakes to individual wheels and, when needed, reduces engine power at the same time. If the wheels spin when accelerating on slippery or loose surfaces, the system reduces engine power in order to increase traction.
  • Page 210 Stability Control PRINCIPLES OF OPERATION WARNING: Vehicle modifications involving braking system, aftermarket roof racks, suspension, steering system, tire construction and/or wheel/tire size may change the handling characteristics of the vehicle and may adversely affect the performance of the AdvanceTrac system. In addition, installing any stereo loudspeakers may interfere with and adversely affect the AdvanceTrac system.
  • Page 211: Stability Control Advancetrac

    Stability Control A Vehicle without AdvanceTrac skidding off its intended route. B Vehicle with AdvanceTrac maintaining control on a slippery surface. USING ADVANCETRAC The system automatically is enabled when you start your engine. The ESC portion of the system is disabled when the transmission is in R (Reverse) or, on SHO models, if the AdvanceTrac switch is pressed and held for more than five seconds when the brakes are applied and the vehicle is at a stop.
  • Page 212 Stability Control AdvanceTrac Features Button icon Mode functions status On during Default at — bulb Enabled Enabled start-up check Button pressed Traction Enabled Disabled momentarily control off Sport mode Button pressed (SHO with twice; brakes Enabled Enabled performance applied pack only) Button pressed AdvanceTrac and held more...
  • Page 213: Parking Aids

    Parking Aids SENSING SYSTEM (IF EQUIPPED) WARNING: To help avoid personal injury, please read and understand the limitations of the system as contained in this section. Sensing is only an aid for some (generally large and fixed) objects when moving in reverse on a flat surface at parking speeds. Traffic control systems, inclement weather, air brakes, and external motors and fans may also affect the function of the sensing system;...
  • Page 214 Parking Aids If a fault is present in the system, a warning message appears in the information display and does not allow the driver to switch the faulted system on. Note: If your vehicle is equipped with MyKey , it is possible to prevent turning the sensing system off.
  • Page 215: Active Park Assist

    Parking Aids ACTIVE PARK ASSIST (IF EQUIPPED) WARNING: This system is designed to be a supplementary park aid. It may not work in all conditions and is not intended to replace the driver’s attention and judgment. The driver is responsible for avoiding hazards and maintaining a safe distance and speed, even when the system is in use.
  • Page 216 Parking Aids Using Active Park Assist Press the button; the touch screen displays a message and a corresponding graphic to indicate it’s searching for a parking space. Use the turn signal to indicate which side of the vehicle you want the system to search on.
  • Page 217 Parking Aids Automatic Steering into Parking Space Note: If vehicle speed exceeds 7 mph (12 km/h), the system turns off and you need to take full control of the vehicle. Note: If a maneuver is interrupted before completion, the system turns off.
  • Page 218 Parking Aids When automatic steering is finished, the touch screen displays a message indicating that the active park assist process is done. The driver is responsible for checking the parking job and making any necessary corrections before putting the transmission in P (Park). Deactivating the Park Assist Feature The system can be deactivated manually by: •...
  • Page 219 Parking Aids The system does not offer a particular space Something may be contacting the front bumper or side sensors There is not enough room on both sides of the vehicle in order to park There is not enough space for the parking maneuver on the opposite side of the parking space The vehicle is farther than 5 ft (1.5 m) from the parking space The vehicle is closer than 16 in.
  • Page 220: Rear-View Camera System

    Parking Aids REAR VIEW CAMERA SYSTEM (IF EQUIPPED) WARNING: The rear view camera system is a reverse aid supplement device that still requires the driver to use it in conjunction with the interior and exterior mirrors for maximum coverage. WARNING: Objects that are close to either corner of the bumper or under the bumper, might not be seen on the screen due to the limited coverage of the camera system.
  • Page 221 Parking Aids Note: If the image comes on while the transmission is not in R (Reverse), have the system inspected by your authorized dealer. Note: When towing, the camera only sees what is being towed behind the vehicle. This might not provide adequate coverage as it usually provides in normal operation and some objects might not be seen.
  • Page 222 Parking Aids A. Active guidelines B. Centerline C. Fixed guideline: Green zone D. Fixed guideline: Yellow zone E. Fixed guideline: Red zone F. Rear bumper Active guidelines are only shown with fixed guidelines. To use active guidelines, turn the steering wheel to point the guidelines toward an intended path.
  • Page 223 Parking Aids The visual park aid alert allows the driver to view the area that is being detected by the reverse sensing system. The system uses red, yellow and green highlights which appear on top of the video image when an object is detected by the reverse sensing system.
  • Page 224: Cruise Control

    Cruise Control PRINCIPLES OF OPERATION Cruise control lets you maintain a set speed without keeping your foot on the accelerator pedal. USING CRUISE CONTROL WARNING: Do not use cruise control in heavy traffic or on roads that are winding, slippery or unpaved. Note: Vehicle speed may vary momentarily when driving up or down a steep hill.
  • Page 225: Using Adaptive Cruise Control

    Cruise Control • Press SET up or down and hold to increase or decrease the set speed. Release the control when you reach the desired speed. • Press SET up or down and release. The set speed will change in approximately 1 mph (2 km/h) increments.
  • Page 226 Cruise Control Note: It is the driver’s responsibility to stay alert, drive safely and be in control of the vehicle at all times. The system is designed to automatically adjust your speed to maintain a proper distance between you and the vehicle in front of you in the same lane.
  • Page 227 Cruise Control 5. A lead vehicle graphic will illuminate if there is a vehicle detected in front of you. Following a Vehicle WARNING: When following a vehicle in front of you, the vehicle will not decelerate automatically to a stop, nor will the vehicle always decelerate quickly enough to avoid a collision without driver intervention.
  • Page 228 Cruise Control brake. This is accompanied by a heads-up display; a red warning bar illuminating on the windshield. The driver should take immediate action. Setting the Gap Distance Note: It is the driver’s responsibility to select a gap appropriate to the driving conditions.
  • Page 229 Cruise Control When the driver is overriding the system, the green indicator light is illuminated, and the follow vehicle is not shown in the information display. The system will resume operation when you release the accelerator pedal. The vehicle speed will decrease to the set speed, or a lower speed if following a slower vehicle.
  • Page 230 Cruise Control these situations to reduce the load on the vehicle’s regular brake system to prevent them from overheating. Switching Off Adaptive Cruise Control Note: The set speed memory is erased when you turn off the system. Press and release OFF or turn off the ignition. Detection Issues The radar sensor has a limited field of vision.
  • Page 231 Cruise Control Adaptive Cruise Control Not Available Several conditions exist which can cause the system to deactivate or prevent the system from activating when requested. These conditions include: • a blocked sensor • high brake temperature • a failure in the system or a related system. Blocked Sensor WARNING: Do not use ACC when towing a trailer with brake controls.
  • Page 232 Cruise Control Cause Action The surface of the radar in the Clean the grille surface in front of grille is dirty or obstructed in the radar or remove the object some way causing the obstruction The surface of the radar in the Wait a short time.
  • Page 233: Driving Aids

    Driving Aids BLIND SPOT INFORMATION SYSTEM (BLIS ) WITH CROSS TRAFFIC ALERT (CTA) (IF EQUIPPED) WARNING: To help avoid injuries, NEVER use the BLIS as a replacement for using the interior and exterior mirrors and looking over your shoulder before changing lanes. BLIS is not a replacement for careful driving and only an assist.
  • Page 234 Driving Aids Note: When a vehicle passes quickly through the blind zone (typically fewer than two seconds), the system does not trigger. Using the Systems BLIS turns on when the engine is started and the vehicle is driven forward above 3 mph (5 km/h); it remains on while the transmission is in D (Drive) and N (Neutral).
  • Page 235 Driving Aids Zone coverage also decreases when parking at shallow angles. Here, the left sensor is mostly obstructed; zone coverage on that side is severely limited. System Lights and Messages The BLIS and CTA systems illuminate a yellow alert indicator in the outside mirror on the side of the vehicle the approaching vehicle is coming from.
  • Page 236 Driving Aids System Sensors WARNING: Just prior to the system recognizing a blocked condition and alerting the driver, the number of missed objects will increase. To help avoid injuries, NEVER use the BLIS as a replacement for using the side and rear view mirrors and looking over your shoulder before changing lanes.
  • Page 237 Driving Aids Reasons for messages being displayed The radar surface is Clean the fascia area in front of the radar or dirty or obstructed remove the obstruction. The radar surface is Drive normally in traffic for a few minutes to not dirty or obstructed allow the radar to detect passing vehicles so it can clear the blocked state.
  • Page 238: Collision Warning System

    Driving Aids System Errors If either system senses a problem with the left or right sensor, the BLIS indicator in the information display will illuminate and remain on. Also, BLIND SPOT SYSTEM FAULT or CROSS TRAFFIC SYSTEM FAULT message will appear. When problems that may cause the left or right indicator not to illuminate, only the information display message faults appear.
  • Page 239 Driving Aids This system is designed to alert the driver of certain collision risks. A radar detects if your vehicle is rapidly approaching another vehicle traveling in the same direction as yours. If it is, a red warning light illuminates and an audible warning chime sounds.
  • Page 240 Driving Aids Blocked Sensors If a message regarding a blocked sensor appears in the information display, the radar signals from the sensor have been obstructed. The sensors are located behind a fascia cover near the driver side of the lower grille. When the sensors are obstructed, a vehicle ahead cannot be detected and the collision warning system does not function.
  • Page 241: Steering

    Driving Aids Due to the nature of radar technology, there may be certain instances where vehicles do not provide a collision warning. These include: • Stationary vehicles or vehicles moving below 6 mph (10 km/h). • Pedestrians or objects in the roadway. •...
  • Page 242 Driving Aids WARNING: The electric power steering system has diagnostic checks that continuously monitor the system to ensure proper operation of the electronic system. When an electronic error is detected, a message will be displayed in the information display. If this happens, stop the vehicle in a safe place, and turn off the engine.
  • Page 243: Load Carrying

    Load Carrying CARGO NET (IF EQUIPPED) WARNING: The cargo net is not designed to restrain objects during a collision or heavy braking. The cargo net secures lightweight objects in the cargo area. Attach the net to the anchors provided. Do not put more than 50 pounds (22 kilograms) in the net.
  • Page 244 Load Carrying Payload – is the combined weight of cargo and passengers that the vehicle is carrying. The maximum payload for your vehicle can be found on the Tire Label on the B-Pillar or the edge of the driver’s door (vehicles exported outside the US and Canada may not have a Tire Label).
  • Page 245 Load Carrying Example only: 2013 Taurus Owners Guide gf, 2nd Printing USA (fus)
  • Page 246 Load Carrying Cargo Weight – includes all weight added to the Base Curb Weight, including cargo and optional equipment. When towing, trailer tongue load weight is also part of cargo weight. GAW (Gross Axle Weight) – is the total weight placed on each axle (front and rear) –...
  • Page 247 Load Carrying GVWR (Gross Vehicle Weight Rating) – is the maximum allowable weight of the fully loaded vehicle (including all options, equipment, passengers and cargo). The GVWR is shown on the Safety Compliance Certification Label. The label shall be affixed to either the door hinge pillar, door-latch post, or the door edge that meets the door-latch post, next to the driver’s seating position.
  • Page 248 Load Carrying WARNING: Exceeding the Safety Compliance Certification Label vehicle weight rating limits could result in substandard vehicle handling or performance, engine, transmission and/or structural damage, serious damage to the vehicle, loss of control and personal injury. GCW (Gross Combined Weight) – is the weight of the loaded vehicle (GVW) plus the weight of the fully loaded trailer.
  • Page 249 Load Carrying WARNING: Exceeding any vehicle weight rating limitation could result in serious damage to the vehicle and/or personal injury. Steps for determining the correct load limit: 1. Locate the statement “The combined weight of occupants and cargo should never exceed XXX kg or XXX lbs.” on your vehicle’s placard. 2.
  • Page 250 Load Carrying • A final example for your vehicle with 1,400 lb. (635 kg) of cargo and luggage capacity. You and one of your friends decide to pick up cement from the local home improvement store to finish that patio you have been planning for the past 2 years.
  • Page 251: Towing

    Towing TOWING A TRAILER WARNING: Do not exceed the GVWR or the GAWR specified on the certification label. WARNING: Towing trailers beyond the maximum recommended gross trailer weight exceeds the limit of the vehicle and could result in engine damage, transmission damage, structural damage, loss of vehicle control, vehicle rollover and personal injury.
  • Page 252 Towing Note: For high altitude operation, reduce the gross combined weight by 2% per 1000 feet (300 meters) starting at the 1000 foot (300 meter) elevation point. Note: Certain states require electric trailer brakes for trailers over a specified weight. Be sure to check state regulations for this specified weight.
  • Page 253 Towing Safety Chains Note: Never attach safety chains to the bumper. Always connect the safety chains to the hook retainers of the vehicle hitch. To connect the safety chains, cross them under the trailer tongue and allow enough slack for turning tight corners. Do not allow the chains to drag on the ground.
  • Page 254 Towing • When stopped in congested or heavy traffic during hot weather, place the gearshift in position P to aid engine and transmission cooling and to help A/C performance. • Turn off the speed control with heavy loads or in hilly terrain. The speed control may turn off automatically when you are towing on long, steep grades.
  • Page 255: Wrecker Towing

    It is recommended that your vehicle be towed with a wheel lift and dollies or flatbed equipment. Do not tow with a slingbelt. Ford Motor Company has not approved a slingbelt towing procedure. If the vehicle is towed incorrectly, or by any other means, vehicle damage may occur.
  • Page 256: Recreational Towing

    Towing TOWING THE VEHICLE ON FOUR WHEELS Emergency Towing In the event your vehicle becomes disabled (without access to wheel dollies, car-hauling trailer, or flatbed transport vehicle), it can be flat-towed (all wheels on the ground, regardless of the powertrain/transmission configuration) under the following conditions: •...
  • Page 257 Towing Front-wheel drive (FWD) vehicles can be towed with all four wheels on the ground or with the front wheels off the ground by using a tow dolly. If you are using a tow dolly follow the instructions specified by the equipment provider.
  • Page 258: Driving Hints

    Driving Hints BREAKING-IN You need to break in new tires for approximately 300 miles (480 kilometers). During this time, your vehicle may exhibit some unique driving characteristics. Avoid driving too fast during the first 1000 miles (1600 kilometers). Vary your speed frequently and change up through the gears early.
  • Page 259: Driving Through Water

    Driving Hints • Add particular accessories to your vehicle (e.g. bug deflectors, rollbars/light bars, running boards, ski racks). • Drive with the wheels out of alignment. DRIVING THROUGH WATER WARNING: Drive through water in an emergency only, and not as part of normal driving. WARNING: Engine damage can occur if water enters the air filter.
  • Page 260: Floor Mats

    Driving Hints FLOOR MATS WARNING: Always use floor mats that are designed to fit the foot well of your vehicle. Only use floor mats that leave the pedal area unobstructed. Only use floor mats that are firmly secured to retention posts so that they cannot slip out of position and interfere with the pedals or impair safe operation of your vehicle in other ways.
  • Page 261 Driving Hints WARNING (Continued) • Failure to properly follow floor mat installation or attachment instructions can potentially cause interference with pedal operation causing loss of control of vehicle. • To install floor mats, position the floor mat so that the eyelet is over the retention post and press down to lock in.
  • Page 262: Roadside Emergencies

    ROADSIDE ASSISTANCE Vehicles Sold in the U.S. : Getting Roadside Assistance To fully assist you should you have a vehicle concern, Ford Motor Company offers a complimentary roadside assistance program. This program is separate from the New Vehicle Limited Warranty. The service is available: •...
  • Page 263: Hazard Warning Flashers

    U.S. Ford vehicle customers who require Roadside Assistance, call 1-800-241-3673. If you need to arrange roadside assistance for yourself, Ford Motor Company will reimburse a reasonable amount for towing to the nearest dealership within 35 miles (56 kilometers). To obtain reimbursement information, U.S.
  • Page 264: Fuel Cut-Off Switch

    WARNING: Failure to inspect and if necessary repair fuel leaks after a collision may increase the risk of fire and serious injury. Ford Motor Company recommends that the fuel system be inspected by an authorized dealer after any collision. In the event of a moderate to severe collision, this vehicle is equipped with a fuel pump shut-off feature that stops the flow of fuel to the engine.
  • Page 265 Roadside Emergencies Preparing Your Vehicle Note: Use only a 12 volt supply to start your vehicle. Note: Do not disconnect the battery of the disabled vehicle as this could damage the vehicle’s electrical system. 1. Park the booster vehicle close to the hood of the disabled vehicle making sure the two vehicles do not touch.
  • Page 266 Roadside Emergencies 1. Connect the positive (+) jumper cable to the positive (+) terminal of the discharged battery. 2. Connect the other end of the positive (+) cable to the positive (+) terminal of the assisting battery. 3. Connect the negative (-) cable to the negative (-) terminal of the assisting battery.
  • Page 267 Roadside Emergencies 1. Remove the jumper cable from the ground metal surface. 2. Remove the jumper cable on the negative (-) terminal of the booster vehicle’s battery. 3. Remove the jumper cable from the positive (+) terminal of the booster vehicle’s battery. 4.
  • Page 268: Customer Assistance

    A reasonable time must be allowed to perform a repair after taking your vehicle to the authorized dealer. Repairs will be made using Ford or Motorcraft parts, or remanufactured or other parts that are authorized by Ford.
  • Page 269 • The name of the authorized dealer and city where located • The vehicle’s current odometer reading In some states, you must directly notify Ford in writing before pursuing remedies under your state’s warranty laws. Ford is also allowed a final repair attempt in some states.
  • Page 270 In the case of 1 or 2 above, the consumer must also notify the manufacturer of the need for the repair of the nonconformity at the following address: Ford Motor Company 16800 Executive Plaza Drive Mail Drop 3NE-B Dearborn, MI 48126...
  • Page 271 THE BETTER BUSINESS BUREAU (BBB) AUTO LINE PROGRAM (U.S. ONLY) Your satisfaction is important to Ford Motor Company and to your dealer. If a warranty concern has not been resolved using the three-step procedure outlined earlier in this chapter in the Getting the services you need section, you may be eligible to participate in the BBB AUTO LINE program.
  • Page 272 ONLY) For vehicles delivered to authorized Canadian dealers. In those cases where you continue to feel that the efforts by Ford of Canada and the authorized dealer to resolve a factory-related vehicle service concern have been unsatisfactory, Ford of Canada participates in an impartial third party mediation/arbitration program administered by the Canadian Motor Vehicle Arbitration Plan (CAMVAP).
  • Page 273 Telephone: (313) 594-4857 For customers in Guam, the Commonwealth of the Northern Mariana Islands (CNMI), America Samoa, and the U.S. Virgin Islands, please feel free to call our Toll-Free Number: (800) 841-FORD (3673). FAX: (313) 390-0804 Email: expcac@ford.com If your vehicle must be serviced while you are traveling or living in Puerto Rico, contact the nearest authorized dealer.
  • Page 274 If you buy your vehicle in North America and then relocate to any of the above locations, register your vehicle identification number (VIN) and new address with Ford Motor Company Export Operations & Global Growth Initiatives by emailing expcac@ford.com. If you are in another foreign country, contact the nearest authorized dealer.
  • Page 275: Reporting Safety Defects (U.s. Only)

    However, NHTSA cannot become involved in individual problems between you, your dealer, or Ford Motor Company. To contact NHTSA, you may call the Vehicle Safety Hotline toll-free at 1–888–327–4236 (TTY: 1–800–424–9153);...
  • Page 276: Fuses

    Fuses CHANGING A FUSE Fuses If electrical components in the vehicle are not working, a fuse may have blown. Blown fuses are identified by a broken wire within the fuse. Check the appropriate fuses before replacing any electrical components. Note: Always replace a fuse with one that has the specified amperage rating.
  • Page 277: Fuse Specification Chart

    Fuses FUSE SPECIFICATION CHART Power Distribution Box WARNING: Always disconnect the battery before servicing high current fuses. WARNING: To reduce risk of electrical shock, always replace the cover to the power distribution box before reconnecting the battery or refilling fluid reservoirs. The power distribution box is located in the engine compartment.
  • Page 278 Fuses Fuse/Relay Fuse Amp Protected Components Number Rating 30A** Wiper motor relay 50A** Anti-lock brake system pump — Not used — Not used 20A** Moonroof, Power sunshade 20A** Second row powerpoint — Not used — Heated rear window relay — Not used —...
  • Page 279 Fuses Fuse/Relay Fuse Amp Protected Components Number Rating — Left-hand cooling fan #1 relay — Not used — Not used — Not used — Not used — Not used — Not used 30A** Passenger power seat 20A** Anti-lock brake system valves —...
  • Page 280 Fuses Fuse/Relay Fuse Amp Protected Components Number Rating — Powertrain control module relay 20A* Oxygen sensor heater, Mass airflow sensor, Variable camshaft timing solenoid valve, Canister vent solenoid, Canister purge solenoid 20A* Ignition coils 20A* Vehicle power #1 (powertrain control module) 15A* A/C clutch, Fan control relay coils...
  • Page 281 Fuses Fuse/Relay Fuse Amp Protected Components Number Rating 7.5A* Powertrain control module keep-alive power and relay, Canister vent solenoid Run/start relay — Run/start relay Front blower relay coil, Electrical power assist steering module 10A* Powertrain control module run/start 10A* Adaptive cruise control module 10A* Anti-lock brake system module, Adaptive headlamp module...
  • Page 282 Fuses Passenger Compartment Fuse Panel The fuse panel is located under the instrument panel to the left of the steering wheel. You may need to remove a trim panel to access it. The fuses are coded as follows. Fuse/Relay Fuse Amp Protected Components Number Rating...
  • Page 283 Fuses Fuse/Relay Fuse Amp Protected Components Number Rating Not used (spare) SYNC module, Multi-function displays, Electronic finish panel, Radio frequency transceiver module Run accessory relay Intelligent access module logic, Heads-up display Puddle lamp, Backlighting LED, Interior lighting Right front turn, Right rear turn Left front turn, Left rear turn Stop lamp, Backup lamp Right front low beam...
  • Page 284 Fuses Fuse/Relay Fuse Amp Protected Components Number Rating Front park lamps Not used (spare) Smart window motors, Master window and mirror switch, Rear window power sunshade module, Lock switch illumination Not used (spare) Reverse park aid module, Automatic high beam and lane departure module, Rear heated seat module, Blind spot monitor module, Rear video camera Motorized humidity sensor, Heads-up...
  • Page 285: Maintenance

    GENERAL INFORMATION Have your vehicle serviced regularly to help maintain its roadworthiness and resale value. There is a large network of Ford authorized dealers that are there to help you with their professional servicing expertise. We believe that their specially trained technicians are best qualified to service your vehicle properly and expertly.
  • Page 286: Opening And Closing The Hood

    Maintenance OPENING AND CLOSING THE HOOD 1. Inside the vehicle, pull the hood release handle located under the bottom of the instrument panel near the steering column. 2. Go to the front of the vehicle and release the auxiliary latch that is located under the front center of the hood.
  • Page 287: Under Hood Overview

    Maintenance UNDER HOOD OVERVIEW 3.5L V6 engine A. Engine coolant reservoir B. Windshield washer fluid reservoir C. Brake fluid reservoir D. Battery E. Power distribution box F. Air filter assembly G. Automatic transmission fluid dipstick H. Engine oil dipstick I. Engine oil filler cap 2013 Taurus Owners Guide gf, 2nd Printing USA (fus)
  • Page 288 Maintenance 3.5L V6 SHO engine A. Engine coolant reservoir B. Brake fluid reservoir C. Battery D. Power distribution box E. Air filter assembly F. Automatic transmission fluid dipstick (out of view) G. Engine oil dipstick H. Engine oil filler cap I.
  • Page 289 Maintenance Engine shield Some vehicles may be equipped with an aero-shield under the engine. This shield needs to be removed for service, including oil and filter changes. It is secured with four quick release fasteners. 2013 Taurus Owners Guide gf, 2nd Printing USA (fus)
  • Page 290 Maintenance 2.0L EcoBoost Engine A. Engine coolant reservoir B. Brake fluid reservoir C. Battery D. Power distribution box E. Air filter assembly F. Engine oil filler cap G. Engine oil dipstick H. Windshield washer fluid reservoir 2013 Taurus Owners Guide gf, 2nd Printing USA (fus)
  • Page 291: Engine Oil Dipstick

    Specification Advisory Council (ILSAC), comprised of U.S. and Japanese automobile manufacturers. 1. Remove the filler cap. 2. Add engine oil that meets Ford specifications. See Capacities and Specifications for more information. 3. Replace the filler cap. Turn it until you feel a strong resistance.
  • Page 292: Engine Coolant Check

    Note: For best results, coolant concentration should be tested with a refractometer such as Rotunda tool 300ROB75240 available from your dealer. Ford does not recommend the use of hydrometers or coolant test strips for measuring coolant concentrations. Note: Automotive fluids are not interchangeable; do not use engine coolant/antifreeze or windshield washer fluid outside of its specified function and vehicle location.
  • Page 293 Unscrew the cap slowly. Any pressure will escape as you unscrew the cap. Add prediluted engine coolant meeting the Ford specification. See Capacities and Specifications for more information. Whenever coolant has been added, the coolant level in the coolant reservoir should be checked the next few times you drive the vehicle.
  • Page 294 Severe Climates If you drive in extremely cold climates: • It may be necessary to have a Ford authorized dealer increase the coolant concentration above 50%. • A coolant concentration of 60% will provide improved freeze point protection.
  • Page 295 Maintenance You may notice a reduction in the vehicle’s speed caused by reduced engine power. Your vehicle has been designed to enter this mode if certain high temperature/high load conditions take place in order to manage the engine’s fluid temperatures. The amount of speed reduction will depend on the vehicle loading, towing, grade, ambient temperature, and other factors.
  • Page 296 Maintenance How fail-safe cooling works If the engine begins to overheat: • The engine coolant temperature gauge will move to the red (hot) area. • The service engine soon indicator will illuminate. • The coolant temperature warning light will illuminate. If the engine reaches a preset over-temperature condition, the engine will automatically switch to alternating cylinder operation.
  • Page 297: Automatic Transmission Fluid Check

    Maintenance WARNING: Fail-safe mode is for use during emergencies only. Operate the vehicle in fail-safe mode only as long as necessary to bring the vehicle to rest in a safe location and seek immediate repairs. When in fail-safe mode, the vehicle will have limited power, will not be able to maintain high-speed operation, and may completely shut down without warning, potentially losing engine power, power steering assist, and power brake assist, which may increase the possibility of a crash...
  • Page 298 Maintenance WARNING: Use gloves when moving the air filter assembly; components will be hot. Note: Automatic transmission fluid expands when warmed. To obtain an accurate fluid check, drive the vehicle until it is warmed up (approximately 20 miles [30 km]). If your vehicle has been operated for an extended period at high speeds, in city traffic during hot weather or pulling a trailer, the vehicle should be turned off until normal operating temperatures are reached to allow the fluid to cool before checking.
  • Page 299 Maintenance Moving the Air Filter Assembly (EcoBoost engine) WARNING: Do not run engine with the air filter disconnected. 1. Shut the engine off. 2. Clean the area around the clamp that connects the air filter assembly to the rubber hose (1). 3.
  • Page 300 Maintenance 7. Without disconnecting the sensor (4), pull the air filter assembly up to disconnect the air filter assembly from the seated grommets located underneath the air filter assembly. 8. Rotate the air filter assembly 90 degrees counterclockwise and reinstall into the rubber hose. 9.
  • Page 301 Maintenance High fluid level If the fluid level is above the MAX range of the dipstick, remove fluid to reach the hashmark level. Note: Fluid level above the MAX level may cause shift and/or engagement concerns and/or possible damage. High fluid levels can be caused by an overheating condition. If your vehicle has been operated for an extended period at high speeds, in city traffic during hot weather or pulling a trailer, the vehicle should be turned off until normal operating temperatures are reached.
  • Page 302: Brake Fluid Check

    Add fluid to fill the reservoir if the level is low. Only use a washer fluid that meets Ford specifications. See the technical specifications chart in the Capacities and Specifications chapter. State or local regulations on volatile organic compounds may restrict the use of methanol, a common windshield washer antifreeze additive.
  • Page 303: Battery

    Maintenance CHANGING THE VEHICLE BATTERY WARNING: Batteries normally produce explosive gases which can cause personal injury. Therefore, do not allow flames, sparks or lighted substances to come near the battery. When working near the battery, always shield your face and protect your eyes. Always provide proper ventilation.
  • Page 304 Maintenance Battery relearn Because your vehicle’s engine is electronically controlled by a computer, some control conditions are maintained by power from the battery. When the battery is disconnected or a new battery is installed, the engine must relearn its idle and fuel trim strategy for optimum driveability and performance.
  • Page 305: Checking The Wiper Blades

    Maintenance CHECKING THE WIPER BLADES Run the tip of your fingers over the edge of the blade to check for roughness. Clean the wiper blades with washer fluid or water applied with a soft sponge or cloth. CHANGING THE WIPER BLADES 1.
  • Page 306: Air Filter(S)

    Maintenance AIR FILTER CHECK WARNING: To reduce the risk of vehicle damage and/or personal burn injuries do not start your engine with the air cleaner removed and do not remove it while the engine is running. When changing the air filter element, use only the air filter element listed.
  • Page 307 Maintenance Changing the Air Filter Element 3.5L V6 engine 2.0L EcoBoost engine 3.5L V6 SHO engine 1. Release the clamps that secure the air filter housing cover. 2. Carefully separate the two halves of the air filter housing. 3. Remove the air filter element from the air filter housing. 4.
  • Page 308: Adjusting The Headlamps

    Maintenance 5. Install a new air filter element. Be careful not to crimp the filter element edges between the air filter housing and cover. This could cause filter damage and allow unfiltered air to enter the engine if not properly seated.
  • Page 309: Changing A Bulb

    Maintenance On the wall or screen you will observe a flat zone of high intensity light located at the top of the right hand portion of the beam pattern. If the top edge of the high intensity light zone is not at the horizontal reference line, the headlamp will need to be adjusted.
  • Page 310 Maintenance • Large water droplets, drip marks or streaks present on the interior of the lens. Take your vehicle to a dealer for service if any of the above conditions of unacceptable moisture are present. Replacing headlamp bulbs WARNING: Handle a halogen headlamp bulb carefully and keep out of children’s reach.
  • Page 311 Maintenance Front parking lamp/turn signal/sidemarker bulbs: 1. Make sure headlamp switch is in the off position, then open the hood. 2. Reach in behind the headlamp assembly to access the bulb sockets and connectors. 3. Rotate the bulb socket counterclockwise and remove from the lamp assembly.
  • Page 312 Maintenance 3. Remove bulb socket by rotating it counterclockwise, then pull it out of the lamp assembly. 4. Pull the bulb straight from the socket. 5. Install the new bulb in reverse order. Replacing high-mount brake lamp bulbs Your vehicle is equipped with an LED high-mount brake lamp. It is designed to last the life of the vehicle.
  • Page 313: Bulb Specification Chart

    Maintenance Replacing supplemental park lamp bulbs Your vehicle is equipped with an LED supplemental park lamp. It is designed to last the life of the vehicle. If replacement is required, it is recommended that you see your authorized dealer. BULB SPECIFICATION CHART Replacement bulbs are specified in the chart below.
  • Page 314: Vehicle Care

    Vehicle Care GENERAL INFORMATION Your Ford or Lincoln authorized dealer has many quality products available to clean your vehicle and protect its finishes. CLEANING PRODUCTS For best results, use the following products or products of equivalent quality: Motorcraft Bug and Tar Remover (ZC-42)
  • Page 315 Vehicle Care • Immediately remove items such as gasoline, diesel fuel, bird droppings and insect deposits because they can cause damage to the vehicle’s paintwork and trim over time. Use Motorcraft Bug and Tar Remover. • Remove any exterior accessories, such as antennas, before entering a car wash.
  • Page 316: Waxing

    Vehicle Care WAXING • Wash the vehicle first. • Use a quality wax that does not contain abrasives. • Do not allow paint sealant to come in contact with any non-body (low-gloss black) colored trim, such as grained door handles, roof racks, bumpers, side moldings, mirror housings or the windshield cowl area.
  • Page 317: Cleaning The Windows And Wiper Blades

    Vehicle Care CLEANING THE WINDOWS AND WIPER BLADES The windows and wiper blades should be cleaned regularly. If the wipers do not wipe properly, substances on the vehicle’s glass or the wiper blades may cause squeaking or chatter noise from the blades, and streaking and smearing of the windshield.
  • Page 318: Cleaning The Instrument Panel And Instrument Cluster Lens

    Vehicle Care For fabric, carpets, cloth seats, safety belts and seats equipped with side airbags: • Remove dust and loose dirt with a vacuum cleaner. • Remove light stains and soil with Motorcraft Professional Strength Carpet & Upholstery Cleaner. • If grease or tar is present on the material, spot-clean the area first with Motorcraft Spot and Stain Remover.
  • Page 319: Cleaning Leather Seats

    Vehicle Care 2. Wipe the surface with a damp, clean, white cotton cloth. For more thorough cleaning, use a mild soap and water solution. If the spot cannot be completely cleaned by this method, the area may be cleaned using a commercially available cleaning product designed for automotive interiors.
  • Page 320: Vehicle Storage

    Vehicle Care • Some automatic car washes may cause damage to the finish on your wheel rims or covers. Industrial-strength (heavy-duty) cleaners, or cleaning chemicals, in combination with brush agitation to remove brake dust and dirt, could wear away the clear coat finish over time. •...
  • Page 321 Vehicle Care • Start the engine every 15 days. Run at fast idle until it reaches normal operating temperature. • With your foot on the brake, shift through all the gears while the engine is running. Fuel system • Fill the fuel tank with high-quality fuel until the first automatic shutoff of the fuel pump nozzle.
  • Page 322 Vehicle Care Removing Vehicle from Storage When your vehicle is ready to come out of storage, do the following: • Wash your vehicle to remove any dirt or grease film build-up on window surfaces. • Check windshield wipers for any deterioration. •...
  • Page 323: Wheels And Tires

    10 to 12 inches or limited production tires as defined in Title 49 Code of Federal Regulations Part 575.104(c)(2). U.S. Department of Transportation-Tire quality grades: The U.S. Department of Transportation requires Ford Motor Company to give you the following information about tire grades exactly as the government has written it.
  • Page 324 Wheels and Tires The traction grades, from highest to lowest are AA, A, B, and C. The grades represent the tire’s ability to stop on wet pavement as measured under controlled conditions on specified government test surfaces of asphalt and concrete. A tire marked C may have poor traction performance.
  • Page 325 Wheels and Tires • Extra load: A class of P-metric or Metric tires designed to carry a heavier maximum load at 41 psi [43 psi (2.9 bar) for Metric tires]. Increasing the inflation pressure beyond this pressure will not increase the tire’s load carrying capability.
  • Page 326 Wheels and Tires Information on P Type Tires P215/65R15 95H is an example of a tire size, load index and speed rating. The definitions of these items are listed below. (Note that the tire size, load index and speed rating for your vehicle may be different from this example.) A.
  • Page 327 Wheels and Tires time under a standard condition of load and inflation pressure. The tires on your vehicle may operate at different conditions for load and inflation pressure. These speed ratings may need to be adjusted for the difference in conditions. The ratings range from 81 mph (130 km/h) to 186 mph (299 km/h).
  • Page 328 Wheels and Tires sidewall. Tire manufacturers also must indicate the ply materials in the tire and the sidewall, which include steel, nylon, polyester, and others. K. Maximum Load: Indicates the maximum load in kilograms and pounds that can be carried by the tire. See the Safety Compliance Certification Label (affixed to either the door hinge pillar, door-latch post, or the door edge that meets the door-latch post, next to the driver’s seating position), for the correct tire pressure for your vehicle.
  • Page 329 Wheels and Tires Additional Information Contained on the Tire Sidewall for LT Type Tires LT type tires have some additional information beyond those of P type tires; these differences are described below. Note: Tire Quality Grades do not apply to this type of tire. A.
  • Page 330 Wheels and Tires Information on T Type Tires T type tires have some additional information beyond those of P type tires; these differences are described below. T145/80D16 is an example of a tire size. Note: The temporary tire size for your vehicle may be different from this example.
  • Page 331 You are strongly urged to buy a reliable tire pressure gauge, as automatic service station gauges may be inaccurate. Ford recommends the use of a digital or dial-type tire pressure gauge rather than a stick-type tire pressure gauge.
  • Page 332 Wheels and Tires on the Safety Compliance Certification Label (affixed to either the door hinge pillar, door-latch post, or the door edge that meets the door-latch post, next to the driver’s seating position), or Tire Label which is located on the B-Pillar or the edge of the driver’s door. The cold inflation pressure should never be set lower than the recommended pressure on the Safety Compliance Certification Label or Tire Label.
  • Page 333 Wheels and Tires 7. Check the sidewalls to make sure there are no gouges, cuts or bulges. Inspecting Your Tires and Wheel Valve Stems Periodically inspect the tire treads for uneven or excessive wear and remove objects such as stones, nails or glass that may be wedged in the tread grooves.
  • Page 334 Wheels and Tires WARNING: Age Tires degrade over time depending on many factors such as weather, storage conditions, and conditions of use (load, speed, inflation pressure, etc.) the tires experience throughout their lives. In general, tires should be replaced after six years regardless of tread wear.
  • Page 335 (such as P-metric versus LT-metric or all-season versus all-terrain) as those originally provided by Ford. The recommended tire and wheel size may be found on either the Safety Compliance Certification Label (affixed to either the door hinge pillar, door-latch post, or the door edge that meets the door-latch post, next to the driver’s seating position), or the Tire Label...
  • Page 336 The tire pressure sensors mounted in the wheels (originally installed on your vehicle) are not designed to be used in aftermarket wheels. The use of wheels or tires not recommended by Ford Motor Company may affect the operation of your tire pressure monitoring system.
  • Page 337 Wheels and Tires Safety Practices WARNING: If your vehicle is stuck in snow, mud, sand, etc., do not rapidly spin the tires; spinning the tires can tear the tire and cause an explosion. A tire can explode in as little as three to five seconds.
  • Page 338: Using Summer Tires

    Mud and Snow (M+S or M/S) tire traction rating on the tire side wall. Since summer tires do not have the same traction performance as All-season or Snow tires, Ford does not recommend using summer tires when temperatures drop to approximately 40°F (5°C) or below (depending on tire wear and environmental conditions) or in snow/ice conditions.
  • Page 339: Using Snow Chains

    USING SNOW CHAINS WARNING: Snow tires must be the same size, load index, speed rating as those originally provided by Ford. Use of any tire or wheel not recommended by Ford can affect the safety and performance of your vehicle, which could result in an increased risk of loss of vehicle control, vehicle rollover, personal injury and death.
  • Page 340: Tire Pressure Monitoring System (Tpms)

    Wheels and Tires TIRE PRESSURE MONITORING SYSTEM WARNING: The tire pressure monitoring system is NOT a substitute for manually checking tire pressure. The tire pressure should be checked periodically (at least monthly) using a tire gauge. See Inflating Your Tires in this chapter. Failure to properly maintain your tire pressure could increase the risk of tire failure, loss of control, vehicle rollover and personal injury.
  • Page 341 Wheels and Tires telltale after replacing one or more tires or wheels on your vehicle to ensure that the replacement or alternate tires and wheels allow the TPMS to continue to function properly. The tire pressure monitoring system complies with part 15 of the FCC rules and with RSS-210 of Industry Canada.
  • Page 342 Wheels and Tires To restore the full functionality of the tire pressure monitoring system, have the damaged road wheel and tire assembly repaired and remounted on your vehicle. For additional information, see Changing Tires with a TPMS in this section. When You Believe Your System Is Not Operating Properly The main function of the tire pressure monitoring system is to warn you when your tires need air.
  • Page 343 Wheels and Tires Low tire Possible cause Customer action required pressure warning light Flashing Spare tire in use Repair the damaged road wheel/tire warning light and reinstall it on the vehicle to restore system functionality. For a description on how the system functions, see When Your Temporary Spare Tire is Installed in this section.
  • Page 344: Changing A Road Wheel

    Ford. If the dissimilar spare tire or wheel is damaged, it should be replaced rather than repaired.
  • Page 345 Wheels and Tires 2. Full-size dissimilar spare with label on wheel: This spare tire has a label on the wheel that states: THIS TIRE AND WHEEL FOR TEMPORARY USE ONLY When driving with one of the dissimilar spare tires listed above, do not: •...
  • Page 346 Wheels and Tires • Ground clearance and parking at curbs • Winter weather driving capability • Wet weather driving capability • All-wheel driving capability (if applicable) • Load leveling adjustment (if applicable) When driving with the full-size dissimilar spare tire and wheel assembly, additional caution should be given to: •...
  • Page 347 Wheels and Tires WARNING: Always use the jack provided as original equipment with your vehicle. If using a jack other than the one provided as original equipment with your vehicle, make sure the jack capacity is adequate for the vehicle weight, including any vehicle cargo or modifications.
  • Page 348 Wheels and Tires 3. The vehicle jacking points are shown here, and are depicted on the yellow warning label on the jack. Jack at the specified locations to avoid damage to the vehicle. 4. Small arrow-shaped marks on the sills show the location of the jacking points.
  • Page 349: Temporary Mobility Kit

    TEMPORARY MOBILITY KIT (IF EQUIPPED) Note: The temporary mobility kit sealant compound in the canister is to be used for one tire only. See your Ford authorized dealer for additional replacement sealant canisters. Your vehicle may be equipped with a temporary mobility kit (located in the spare tire well in the trunk).
  • Page 350 Wheels and Tires canister that will effectively seal most punctures caused by nails or similar objects. This kit will provide a temporary seal allowing you to drive your vehicle up to 120 miles (200 km) at a maximum speed of 50 mph (80 km/h).
  • Page 351 Wheels and Tires • Note: Do not drive further than 120 miles (200 kilometers). Drive only to the closest Ford Motor Company authorized dealer or tire repair shop to have your tire inspected. • Drive carefully and avoid abrupt steering maneuvers.
  • Page 352 Wheels and Tires • After sealant use, the TPMS sensor and valve stem on the wheel must be replaced by an authorized Ford dealer. • When inflating a tire or other objects, use the black air hose only. Do not use the transparent hose which is designed for sealant application only.
  • Page 353 Wheels and Tires 3. Remove the tube cap and fasten the metal connector of the tube to the tire valve, turning clockwise. Make sure the connection is tightly fastened. 4. Plug the power cable into the 12-volt power point in the vehicle. 5.
  • Page 354 Wheels and Tires Note: When the sealing compound is first added into the tire, the air pressure gauge reading on the compressor unit may indicate a higher value; this is normal and should be no reason for concern. The pressure will drop after about 30 seconds of operation.
  • Page 355 After using the temporary mobility kit to seal your tire, you will need to replace the sealant canister and clear tube (hose). Sealing compound and spare parts can be obtained and replaced at an authorized Ford Motor Company dealership or tire dealer. Empty sealant bottles may be disposed of at home;...
  • Page 356 Wheels and Tires Removal of the sealant canister from the temporary mobility kit 1. Unwrap the clear tube from the compressor housing. 2. Press the button located on the temporary mobility kit compressor housing below the canister while pulling up on the sealant canister. Installation of the sealant canister to the temporary mobility kit 1.
  • Page 357 3. Wrap the clear tube around the compressor housing. Note: If you experience any difficulties with the removal or installation of the sealant canister, consult your Ford Motor Company authorized dealer for assistance. Be sure to check the sealant compound’s “use by” date regularly.
  • Page 358: Technical Specifications

    N•m ⁄ x 20 * Torque specifications are for nut and bolt threads free of dirt and rust. Use only Ford recommended replacement fasteners. Note: Inspect the wheel pilot hole and mounting surface prior to installation. Remove any visible corrosion or loose particles.
  • Page 359: Capacities And Specifications

    Capacities and Specifications ENGINE SPECIFICATIONS 3.5L V6 SHO 2.0L EcoBoost Engine 3.5L V6 engine engine engine Cubic inches See Octane recommendations in the Fuel and Required fuel Refueling chapter. Firing order 1–4–2–5–3–6 1–4–2–5–3–6 1-3-4-2 Ignition Coil on plug Coil on plug Coil on plug system Spark plug...
  • Page 360 Capacities and Specifications 3.5L V6 SHO engine 2.0L EcoBoost engine 2013 Taurus Owners Guide gf, 2nd Printing USA (fus)
  • Page 361 Capacities and Specifications 2013 Taurus Owners Guide gf, 2nd Printing USA (fus)
  • Page 362 Capacities and Specifications 2013 Taurus Owners Guide gf, 2nd Printing USA (fus)
  • Page 363 Capacities and Specifications 2013 Taurus Owners Guide gf, 2nd Printing USA (fus)
  • Page 364 Capacities and Specifications 2013 Taurus Owners Guide gf, 2nd Printing USA (fus)
  • Page 365: Part Numbers

    Refer to scheduled maintenance information for the appropriate intervals for changing the spark plugs. Note: Replace the spark plugs with ones that meet Ford material and design specifications for your vehicle, such as Motorcraft or equivalent replacement parts. The customer warranty may be void for any damage to the engine if such spark plugs are not used.
  • Page 366: Vehicle Certification Label

    Capacities and Specifications The Vehicle Identification Number (VIN) contains the following information: A. World manufacturer identifier B. Brake system / Gross Vehicle Weight Rating (GVWR) / Restraint Devices and their location C. Make, vehicle line, series, body type D. Engine type E.
  • Page 367: Transmission Code Designation

    Capacities and Specifications TRANSMISSION CODE DESIGNATION You can find a transmission code on the Safety Compliance Certification Label. The following table tells you which transmission each code represents. Description Code 6-speed automatic transmission (6F50) 6-speed automatic transmission (6F55) 6-speed automatic transmission (6F35) 2013 Taurus Owners Guide gf, 2nd Printing USA (fus)
  • Page 368: Accessories

    Accessories.Ford.com (U.S. only). Ford Custom Accessories are available for your vehicle through your local Ford or Ford of Canada dealer. Ford Motor Company will repair or replace any properly dealer-installed Ford Custom Accessories found to be defective in factory-supplied materials or workmanship during the warranty period, as well as any component damaged by the defective accessories.
  • Page 369 Ford Motor Company engineering requirements. Contact your Ford dealer for details regarding the manufacturer’s limited warranty and/or a copy of the FLA product limited warranty offered by the accessory manufacturer.
  • Page 370 • Any non-Ford custom electrical or electronic accessories or components that are added to the vehicle by the authorized dealer or the owner, may adversely affect battery performance and durability, and may also adversely affect the performance of other electrical systems in the vehicle.
  • Page 371: Ford Extended Service Plan

    BaseCare – Covers 84 components. PowertrainCare – Covers 29 critical components. Ford ESP is honored by all Ford and Lincoln Dealers in the U.S. and Canada It’s the only extended service plan authorized and backed by Ford Motor Company. That means you get: •...
  • Page 372 To learn more, call our Ford ESP specialists at 800–367–3377, and don’t forget to ask about our interest free payment program, allowing you all the security and benefits Ford ESP has to offer while paying over time. You’re pre-approved with no credit checks, no hassles!
  • Page 373 Ford ESP coverage. This information is subject to change. For more information, visit your local Ford of Canada dealer or www.ford.ca to find the Ford Extended Service Plan that is right for you. 2013 Taurus Owners Guide gf, 2nd Printing...
  • Page 374: Scheduled Maintenance

    Motor Company’s specifications. Parts installed at your dealership carry a nationwide, 12 month/12000 mile (20000 kilometer) parts and labor limited warranty. If you do not use Ford authorized parts, they may not meet Ford specifications and, depending on the part, it could affect emissions compliance.
  • Page 375 Ford Motor Company has recommended maintenance intervals for various parts and component systems based upon engineering testing. Ford Motor Company relies upon this testing to determine the most appropriate mileage for replacement of oils and fluids to protect your vehicle at the lowest overall cost to you and recommends against maintenance schedules that deviate from the scheduled maintenance information.
  • Page 376 It is critical that systems are flushed only with new fluid that is the same as that required to fill and operate the system, or using a Ford-approved flushing chemical. Owner Checks and Services Certain basic maintenance checks and inspections should be performed every month or at six month intervals.
  • Page 377 In order to keep your vehicle running right, it is important to have the systems on your vehicle checked regularly. This can help identify potential issues and prevent major problems. Ford Motor Company recommends the following multi-point inspection be performed at every scheduled maintenance interval to help make sure your vehicle keeps running great.
  • Page 378 Scheduled Maintenance 2013 Taurus Owners Guide gf, 2nd Printing USA (fus)
  • Page 379: Normal Scheduled Maintenance And Log

    Scheduled Maintenance NORMAL SCHEDULED MAINTENANCE AND LOG Intelligent Oil-Life Monitor Your vehicle is equipped with an Intelligent Oil-Life Monitor that determines when the engine oil needs to be changed based on how your vehicle is used. By using several important factors in its calculations, the monitor helps reduce the cost of owning your vehicle and reduce environmental waste at the same time.
  • Page 380 Scheduled Maintenance Normal Scheduled Maintenance At every oil change Change engine oil and filter. interval as indicated by Rotate tires, inspect tire wear and measure the information display tread depth. Perform multi-point inspection (recommended). Inspect automatic transmission fluid level (if equipped with dipstick).
  • Page 381 Scheduled Maintenance Additional Maintenance Items Every 20000 miles Replace cabin air filter (if equipped). (32000 km) Every 30000 miles Replace climate-controlled (heated and (48000 km) cooled) seat filter (if equipped). Replace engine air filter. At 100000 miles Change engine coolant. (160000 km) Every 100000 miles Replace spark plugs.
  • Page 382 Scheduled Maintenance Maintenance Schedule Log EALER ALIDATION EALER ALIDATION P&A C P&A C RO#: RO#: OURS OURS ILEAGE ILEAGE EALER ALIDATION EALER ALIDATION P&A C P&A C RO#: RO#: OURS OURS ILEAGE ILEAGE EALER ALIDATION EALER ALIDATION P&A C P&A C RO#: RO#: OURS...
  • Page 383 Scheduled Maintenance EALER ALIDATION EALER ALIDATION P&A C P&A C RO#: RO#: OURS OURS ILEAGE ILEAGE EALER ALIDATION EALER ALIDATION P&A C P&A C RO#: RO#: OURS OURS ILEAGE ILEAGE EALER ALIDATION EALER ALIDATION P&A C P&A C RO#: RO#: OURS OURS ILEAGE...
  • Page 384 Scheduled Maintenance EALER ALIDATION EALER ALIDATION P&A C P&A C RO#: RO#: OURS OURS ILEAGE ILEAGE EALER ALIDATION EALER ALIDATION P&A C P&A C RO#: RO#: OURS OURS ILEAGE ILEAGE EALER ALIDATION EALER ALIDATION P&A C P&A C RO#: RO#: OURS OURS ILEAGE...
  • Page 385 Scheduled Maintenance SPECIAL OPERATING CONDITIONS If you operate your vehicle primarily in any of the following conditions, you need to perform additional maintenance as indicated. If you occasionally operate your vehicle under any of these conditions, it is not necessary to perform the additional maintenance. For specific recommendations, see your dealership service advisor or technician.
  • Page 386 Scheduled Maintenance Extensive Idling or Low-speed Driving for Long Distances as in Heavy Commercial Use (i.e., Delivery, Taxi, Patrol Car or Livery) As required Change engine oil and filter as indicated by the information display and perform services listed in the Normal Scheduled Maintenance chart.
  • Page 387 Scheduled Maintenance Special Operating Condition Log EALER ALIDATION EALER ALIDATION P&A C P&A C RO#: RO#: OURS OURS ILEAGE ILEAGE EALER ALIDATION EALER ALIDATION P&A C P&A C RO#: RO#: OURS OURS ILEAGE ILEAGE EALER ALIDATION EALER ALIDATION P&A C P&A C RO#: RO#:...
  • Page 388 Scheduled Maintenance EALER ALIDATION EALER ALIDATION P&A C P&A C RO#: RO#: OURS OURS ILEAGE ILEAGE EALER ALIDATION EALER ALIDATION P&A C P&A C RO#: RO#: OURS OURS ILEAGE ILEAGE EALER ALIDATION EALER ALIDATION P&A C P&A C RO#: RO#: OURS OURS ILEAGE...
  • Page 389 Normal vehicle axle maintenance: Rear axles and power take-off (PTO) units with synthetic fluid and light-duty trucks equipped with Ford-design axles are lubricated for life; do not check or change fluid unless a leak is suspected, service is required or the assembly has been submerged in water.
  • Page 390 Scheduled Maintenance Edge/MKX AWD only: Vehicles operating off-road in sand during high ambient temperatures must replace the AWD PTU (All-wheel drive Power Transfer Unit) lube every 20000 miles (32000 kilometers). Engine air filter & cabin air filter replacement: Engine air filter and cabin air filter life is dependent on exposure to dusty and dirty conditions.
  • Page 391: Sync

    SYNC SYNC is an in-vehicle communications system that works with your Bluetooth-enabled cellular phone and portable media player. This allows you to: • Make and receive calls. • Access and play music from your portable music player. • Use 911 Assist , Vehicle Health Report and SYNC Services (Traffic, Directions &...
  • Page 392 Safety Information WARNING: Driving while distracted can result in loss of vehicle control, accident and injury. Ford strongly recommends that drivers use extreme caution when using any device that may take their focus off the road. Your primary responsibility is the safe operation of the vehicle.
  • Page 393 Master Reset to erase all stored information. System data cannot be accessed without special equipment and access to the vehicle’s SYNC module. Ford Motor Company and Ford of Canada do not access the system data for any purpose other than as described...
  • Page 394 SYNC USING VOICE RECOGNITION This system helps you control many features using voice commands. This allows you to keep your hands on the wheel and focus on what is in front of you. Initiating a Voice Session Push the voice icon; a tone sounds and Listening appears in the display.
  • Page 395 SYNC Adjusting the Interaction Level Push the voice icon; when prompted, say “Voice settings”, then any of the following: When you say: The system: “Interaction mode standard” Provides more detailed interaction and guidance. “Interaction mode advanced” Provides less audible interaction and more tone prompts.
  • Page 396: Pairing Your Phone For The First Time

    SYNC • Speak naturally, without long pauses between words. • At any time you can interrupt the system while it is speaking by pressing the voice icon. USING SYNC WITH YOUR PHONE Hands-free calling is one of the main features of SYNC. While the system supports a variety of features, many are dependent on your cellular phone’s functionality.
  • Page 397 SYNC 6. The display indicates when the pairing is successful. 7. Depending on your phone’s capability and your market, the system may prompt you with questions such as setting the current phone as the primary phone (the phone SYNC automatically tries to connect with first upon vehicle start-up), downloading your phone book, etc.
  • Page 398 SYNC “PHONE” “Join” “Call <name> at home” “Call <name> at work” OR “Call <name> in office” “Dial” “Phone book <name>” “Phone book <name> at work” OR “Phone book <name> at office” “Call history incoming” “Connections” “Go to privacy” “Hold” These commands do not require you to say “Phone” first. These commands are not available until phone information is completely downloaded using Bluetooth.
  • Page 399 SYNC “DIAL” “411” (four-one-one), “911” (nine-one-one), etc. “700 (seven hundred)” (seven hundred) “800 (eight hundred)” (eight hundred) “900 (nine hundred)” (nine hundred) “#” “/” (pound, slash) “<number> 0–9” “Asterisk” (*) “Clear” (deletes all entered digits) “Delete” (deletes one digit) “Plus” “Star”...
  • Page 400 SYNC 2. When Active Call Menu is selected, press OK. 3. Scroll to cycle through the following options: When you You can: select: Mute Call? Mute the call. Privacy Switch a call from an active hands-free environment to your cellular phone for a more private conversation. Press OK when Privacy on/off appears.
  • Page 401 SYNC Accessing Features through the Phone Menu SYNC’s phone menu allows you to redial a number, access your call history and phone book and send text messages as well as access phone and system settings. You can also access advanced features, such as 911 Assist , Vehicle Health Report and SYNC Services.
  • Page 402 SYNC When you You can: select: Access the SYNC services portal where you can request SYNC Services various types of information, traffic reports and directions. 911 Assist Place an emergency call to a 911 operator for you after an accident (if the feature is used properly). Vehicle Create and receive a diagnostic report card on your Health...
  • Page 403 SYNC When a new message arrives, an audible tone sounds and the display indicates you have a new message. You have these options: 1. Press the voice button, wait for the prompt and say “Read Message” to have SYNC read the message to you. 2.
  • Page 404 6. Press OK when the contact appears and press OK again to confirm when the system asks if you would like to send the message. Each text message is sent with the following signature: “This message was sent from my <Ford or Lincoln>”. Pre-defined text message options Can’t talk right now...
  • Page 405 SYNC Accessing Your Phone Settings These are phone-dependent features. Your phone settings allow you to access and adjust features such as your ring tone, text message notification, modify your phone book and also set up automatic download. 1. Press the phone button. 2.
  • Page 406 SYNC When you You can: select: Automatically download your phone book each time Auto Download your phone connects to SYNC. Press OK to select. When Auto Download On? appears, press OK to have your phonebook automatically downloaded each time. Select Off to NOT download your phonebook every time your phone connects to SYNC.
  • Page 407 SYNC 4. Scroll to select from the following options: If you You can: select: See Using SYNC with your phone earlier in this Bluetooth chapter for pairing instructions. Device Connect Connect a previously paired Bluetooth-enabled phone. 1. Press OK to select and view a list of previously Bluetooth paired phones.
  • Page 408 SYNC Advanced Menu Options This menu allows you to access settings such as prompts, languages, defaults, perform a master reset, install an application and view system information. 1. Press the phone button to enter the Phone Menu. 2. Scroll until System Settings appears and press OK. 3.
  • Page 409: 911 Assist

    SYNC If you You can: select: Master Completely erase all information stored on SYNC (phonebook, call history, text messages and paired Reset devices) and return to the factory default settings. Press OK to select. The display indicates when complete and SYNC takes you back to the Advanced menu.
  • Page 410 SYNC WARNING: Do not wait for 911 Assist to make an emergency call if you can do it yourself. Dial emergency services immediately to avoid delayed response time which could increase the risk of serious injury or death after a crash. If you do not hear 911 Assist within five seconds of the crash, the system or phone may be damaged or non-functional.
  • Page 411 SYNC Off selections include: Off with reminder and Off without reminder. Off with reminder provides a display and voice reminder at phone connection at vehicle start. Off without reminder provides a display reminder only without a voice reminder at phone connection. To make sure that 911 Assist works properly: •...
  • Page 412: Vehicle Health Report

    SYNC • The phone(s) paired and connected to the system was thrown from the vehicle. 911 Assist Privacy Notice Once 911 Assist is set on, it may disclose to emergency services that the vehicle has been in a crash involving the deployment of an airbag or activation of the fuel pump shut-off.
  • Page 413 Press OK for SYNC to run a health report of Run Report? your vehicle’s diagnostic systems and send the results to Ford where it is combined with scheduled maintenance information, open recalls and other field service actions and unserviced vehicle inspection items from your authorized dealer.
  • Page 414 Certain versions or updates to Vehicle Health Report may also collect additional vehicle information. Ford may use the vehicle information it collects for any purpose. If you do not want to disclose your cellular phone number or vehicle information, do not run the feature or set up your Vehicle Health Report profile at www.SYNCMyRide.com.
  • Page 415 SYNC information or other information identified in the Terms and Conditions, do not activate or use the service. SYNC Services uses advanced vehicle sensors, integrated GPS technology and comprehensive map and traffic data, to give you personalized traffic reports, precise turn-by-turn directions, business search, news, sports, weather and more.
  • Page 416 SYNC Receiving Turn-by-Turn Directions 1. When connected to SYNC Services, say “Directions” or “Business search”. To find the closest business or type of business to your current location, just say “Business search” and then “Search near me”. If you need further assistance in finding a location you can say “Operator”...
  • Page 417 SYNC Disconnecting from SYNC Services 1. Press and hold the phone button on the steering wheel. 2. Say “Good-bye” from the SYNC Services main menu. SYNC Services Quick Tips Personalizing You can personalize your Services feature to provide quicker access to your most used or favorite information.
  • Page 418 SYNC USING SYNC WITH YOUR MEDIA PLAYER You can access and play music from your digital music player over the vehicle’s speaker system using the system’s media menu or voice commands. You can also sort and play your music by specific categories, such as artists, albums, etc.
  • Page 419 SYNC What’s Playing? At any time when a track is playing, you can press the voice icon and ask the system, “What’s playing?”. The system reads the metadata tags (if populated) of the playing track to you. Media Voice Commands Press the voice icon and, when prompted, say “USB”...
  • Page 420 SYNC “USB” “Search song <name>” “Search track <name>” “Shuffle off” “Shuffle on” “Similar music” “What’s playing?” “<name>” is a dynamic listing, meaning that it could be the name of any desired group, artist, etc. Voice commands which are only available in folder mode. Voice commands which are not available until indexing is complete.
  • Page 421 SYNC Voice Command Guide “Search/Play The system searches for a specific Artist/Track/Album” artist/track/album from the music indexed through the USB port. “Refine” This allows you to make your previous command more specific. For example, if you asked to search and play all music by a certain artist, you could then say “refine album”...
  • Page 422 SYNC 2. Scroll to cycle through: When you select: You can: Play your music by artist, album, genre, Play Menu playlists, tracks, similar music or to simply, play all. You can also choose to Explore USB to view the supported digital music files on your playing device.
  • Page 423 SYNC When you select: You can: Media Settings Choose to shuffle or repeat your music and select your Autoplay settings. Once these selections are turned on, they remain on until turned off. Press SEEK to play the previous or next track. Note: Some digital media players require both USB and line in ports to stream data and music separately.
  • Page 424 SYNC 2. Press AUX and then MENU to enter the Media Menu. 3. Scroll to select the Play Menu and press OK. If there are no media files to access, the display indicates there is no media. If there are media files, you have the following options to scroll through and select from: When you select: You can:...
  • Page 425 SYNC When you select: You can: Genres Sort indexed music by genre (category) type. SYNC lists the genres alphabetically in flat file mode. If there are more than 255, SYNC automatically organizes them into alphabetical categories. Press OK to select and then scroll to select the desired genre and press OK.
  • Page 426 SYNC When you select: You can: Similar Music Play music similar to what is currently playing from the USB port. The system uses the metadata information of each song to compile a playlist for you. Press OK to select. The system creates a new list of similar songs and begins playing.
  • Page 427 SYNC 4. Press OK and then scroll to select from: When you select: You can: Add Bluetooth Allows you to pair additional devices to the system. Device 1. Press OK to select and press OK again when Find SYNC appears in the display. 2.
  • Page 428 SYNC 2. Scroll until System Settings appears and select OK. 3. Scroll until Advanced appears. 4. Press OK and then scroll to select from the following: When you You can: select: Have SYNC guide you via questions, helpful hints or ask Prompts you for a specific action.
  • Page 429 SYNC TROUBLESHOOTING Your SYNC system is easy to use. However, should questions arise, see the tables below. Use the website at any time to check your phone’s compatibility, register your account and set preferences as well as access a customer representative via an online chat (during certain hours).
  • Page 430 SYNC Phone Issues Issue Possible Possible Solution(s) Cause(s) • Try pushing your phonebook The system says Limitations on Phonebook your phone’s ca- contacts to SYNC by using the Downloaded but pability. Add Contacts feature. • If the missing contacts are my phonebook in SYNC is empty or stored on your SIM card, try...
  • Page 431 SYNC USB/Media Issues Issue Possible Possible Solution(s) Cause(s) • Try turning off the device, I am having Possible device trouble malfunction. resetting the device or removing connecting my the device’s battery, then trying device. again. • Make sure you are using the manufacturer’s cable.
  • Page 432 SYNC USB/Media Issues Issue Possible Possible Solution(s) Cause(s) • This is a Bluetooth audio Make sure the device is does not stream. phone-dependent connected to SYNC and that you feature, OR have pressed play on your • The device is device.
  • Page 433 SYNC Vehicle Health Report/Services (Traffic, Directions and Informa- tion) Issues Issue Possible Possible Solution(s) Cause(s) • Your account • This is a free feature, but you I received a text that the Vehicle may not be acti- must first register online to use Health Report is vated on the web- •...
  • Page 434 SYNC Voice Command Issues Issue Possible Possible Solution(s) Cause(s) • You may be • Review the Phone voice SYNC does not understand what using the wrong commands and the Media voice I am saying. voice commands, commands at the beginning of their respective sections.
  • Page 435 SYNC Voice Command Issues Issue Possible Possible Solution(s) Cause(s) • You may be • Review the phone voice SYNC does not understand or is using the wrong commands at the beginning of calling the wrong voice commands, the phone section. •...
  • Page 436: Myford Touch (If Equipped)

    INTRODUCTION WARNING: Driving while distracted can result in loss of vehicle control, accident and injury. Ford strongly recommends that drivers use extreme caution when using any device or feature that may take their focus off the road. Your primary responsibility is the safe operation of the vehicle.
  • Page 437 MyFord Touch (If Equipped) If the icon is yellow, see Alerts in the Information section of this chapter. PHONE Press to select any of the following: • Making and Receiving Calls • Quick Dial • Phonebook • Call History • Text Messaging •...
  • Page 438 MyFord Touch (If Equipped) • Passenger Settings • A/C • Defrost HOME Press to access your home screen. Depending on your vehicle’s option package and software, your screens may vary in appearance from the screens shown in this section. Your features may also be limited depending on your market.
  • Page 439 Safety Information WARNING: Driving while distracted can result in loss of vehicle control, accident and injury. Ford strongly recommends that drivers use extreme caution when using any device that may take their focus off the road. Your primary responsibility is the safe operation of the vehicle.
  • Page 440 MyFord Touch (If Equipped) Speed-restricted Features Some features of this system may be too difficult to use while the vehicle is in motion so they are restricted from being modified unless the vehicle is not moving. Some examples of these are listed below: •...
  • Page 441 Master Reset to erase all stored information. System data cannot be accessed without special equipment and access to the vehicle’s SYNC module. Ford Motor Company and Ford of Canada do not access the system data for any purpose other than as described...
  • Page 442: Infotainment Display

    MyFord Touch (If Equipped) ACCESSING AND ADJUSTING MODES THROUGH YOUR RIGHT VEHICLE INFORMATION DISPLAY (IF EQUIPPED) 100 120 180 200 20 0 km/h The display is located on the right side of your instrument cluster. Your steering wheel controls can be used to view and make minor adjustments to active modes without taking your hands off the wheel.
  • Page 443: Voice Recognition

    MyFord Touch (If Equipped) Phone Navigation Climate You can make selections from the menu by using the OK button. The selection menu expands and you are allowed different options. • Press the up and down arrows to scroll through the modes. •...
  • Page 444 MyFord Touch (If Equipped) How to Use Voice Commands with Your System Press the voice icon; after the tone, speak your command clearly. These commands can be said at any time. “Cancel” “Exit” “Go back” “List of commands” “Main menu” “Next page”...
  • Page 445 MyFord Touch (If Equipped) Voice Command List “Navigation list of commands” “Phone list of commands” “Radio list of commands” “SD card list of commands” “Sirius satellite list of commands” “Travel link list of commands” “USB list of commands” “Voice instructions list of commands” “Voice settings list of commands”...
  • Page 446 MyFord Touch (If Equipped) Phone/Media Candidate Lists: Candidate lists are lists of possible results from your voice commands. The system creates these lists when it has the same confidence level of several options based on your voice command. To access these settings using the touchscreen: 1.
  • Page 447 MyFord Touch (If Equipped) Some of the voice commands that are available while viewing this screen are: “DESTINATION” “Destination my home” “Destination street address” “Destination favorites” “Destination previous destinations” “Destination POI” “Destination intersection” “Destination emergency” If you choose Street Address from the navigation screen, you can choose from the following: •...
  • Page 448: Listening To Music

    MyFord Touch (If Equipped) Some of the voice commands that are available while viewing this screen are: “POINTS OF INTEREST” or “POI” “Destination <POI category name>” “Search by name” “Search by category” “Change search area” Note: These are just a sample of the voice commands available within the Points of Interest section;...
  • Page 449 MyFord Touch (If Equipped) Browsing Device Content When listening to any type of audio, you can browse through other devices without having to change sources. For example, if you are currently listening to the radio, you can browse all the artists that are stored on your USB device.
  • Page 450 MyFord Touch (If Equipped) AM/FM Radio Press the lower left corner of the touchscreen and then select the AM or FM tab. To change between AM and FM presets, just touch the AM or FM tab. When you select: You can: Presets Save a station by pressing and holding one of the memory preset areas.
  • Page 451 MyFord Touch (If Equipped) When you select: You can: Options Sound Settings allows you to adjust Bass, Midrange, Treble, Balance and Fade, THX Deep Note Demo (if equipped), DSP (if equipped), Occupancy Mode (if equipped), and Speed Compensated Volume settings. Set PTY for Seek/Scan allows you to select a category of music you would like to search for and then choose to either seek or scan for...
  • Page 452 MyFord Touch (If Equipped) Digital broadcasts provide a better sound quality than analog broadcasts with free, crystal-clear audio and no static or distortion. For more information, and a guide to available stations and programming, please visit www.hdradio.com. When this feature is enabled and you are tuned to a station broadcasting HD Radio technology, you may notice the following indicators on your screen: HD) logo blinks when a digital station is being acquired and is...
  • Page 453 MyFord Touch (If Equipped) When HD Radio broadcasts are active, you can access the following functions: When you select: You can: Scan Hear a brief sampling of all available stations. This feature still works when HD Radio reception is activated, although it does not scan for HD2 through HD7 channels.
  • Page 454 MyFord Touch (If Equipped) HD Radio Reception and Station Troubleshooting Potential Reception Issues Reception area If you are listening to a multicast station and you are on the fringe of the reception area, the station may mute due to weak signal strength.
  • Page 455 HD Radio™ Technology manufactured under license from iBiquity Digital Corp. U.S. and foreign patents. HD Radio™ and the HD and HD Radio logos are proprietary trademarks of iBiquity Digital Corp. Ford Motor Company and iBiquity Digital Corp. are not responsible for the content sent using HD Radio technology.
  • Page 456 MyFord Touch (If Equipped) Radio Voice Commands If you are listening to the radio, press the voice button on the steering wheel control. When prompted, say any of the commands in the following chart. If you are not listening to the radio, press the voice button and, after the tone, say “Radio”, then any of the commands in the following chart.
  • Page 457 MyFord Touch (If Equipped) “TUNE” “FM <87.9–107.9>” “Help” “FM <87.9-107.9> HD <#>” If available. SIRIUS Satellite Radio (If Activated) Press the lower left corner of the touchscreen, then select the SIRIUS tab. When you You can: select: Presets Save a station by pressing and holding one of the memory preset areas.
  • Page 458 Note: SIRIUS does not support the Alert feature on all channels. Ford Motor Company shall not be responsible for Alert feature variation. Electronic Serial Number (ESN) is required when communicating with SIRIUS about your account.
  • Page 459 MyFord Touch (If Equipped) Satellite Radio Voice Commands If you are listening to SIRIUS satellite radio, press the voice button on the steering wheel control. When prompted, say any of the commands in the following chart. If you are not listening to SIRIUS satellite radio, press the voice button and, after the tone, say “Sirius”, then any of the commands in the following chart.
  • Page 460 Note: SIRIUS reserves the unrestricted right to change, rearrange, add or delete programming including canceling, moving or adding particular channels, and its prices, at any time, with or without notice to you. Ford Motor Company shall not be responsible for any such programming changes.
  • Page 461 MyFord Touch (If Equipped) Potential Satellite Radio Reception Issues Antenna For optimal reception performance, keep the obstructions antenna clear of snow and ice build-up and keep luggage and other materials as far away from the antenna as possible. Terrain Hills, mountains, tall buildings, bridges, tunnels, freeway overpasses, parking garages, dense tree foliage and thunderstorms can interfere with your reception.
  • Page 462 MyFord Touch (If Equipped) SIRIUS Troubleshooting Tips Radio Display Condition Possible Action Unsubscribed Channel. Subscription not Contact SIRIUS at available for this 1–888–539–7474 to channel. subscribe to the channel, or tune to another channel. No Signal. Loss of signal from the The signal is currently SIRIUS satellite or being blocked.
  • Page 463 MyFord Touch (If Equipped) When you select: You can: Scan Hear a brief sampling of all available tracks. See disc information. More Info Options Sound: Adjust Bass, Treble, Midrange, Balance and Fade, THX Deep Note Demo (if equipped), DSP (if equipped), Occupancy Mode (if equipped), and Speed Compensated Volume settings.
  • Page 464 MyFord Touch (If Equipped) The card slot can be used for your navigation card (if equipped). See Navigation system later in this chapter for more information. The slot is located either in the center console or behind a small access door in the instrument panel.
  • Page 465 MyFord Touch (If Equipped) Playing Music from Your Device Insert your device and select the USB or SD Card tab once the system recognizes it. You can then select from the following options: When you select: You can: Repeat Repeat the currently playing song or album. Shuffle Play music on the selected album or folder in random order.
  • Page 466 MyFord Touch (If Equipped) SD Card and USB Voice Commands If you are listening to a USB device or an SD card, press the voice button on the steering wheel control. When prompted, say any of the commands in the following chart. If you are not listening to a USB device or an SD card, press the voice button and, after the tone, say “USB”...
  • Page 467 MyFord Touch (If Equipped) “BROWSE” “All audiobooks” “Audiobook <name>” “All authors” “Author <name>” “All composers” “Composer <name>” “All folders” “Folder <name>” “All genres” “Genre <name>” “All movies” “Playlist <name>” “All music videos” “Podcast <name>” “All playlists” “TV show <name>” “All podcasts” “Video <name>”...
  • Page 468 MyFord Touch (If Equipped) Bluetooth Voice Commands “Browse album “Browse composer “Play genre <name>” <name>” <name>” “Browse all albums” “Browse folder “Play playlist <name>” <name>” “Browse all artists” “Browse genre “Play podcast episode <name>” <name>” “Browse all ”Browse playlist “Play similar music” audiobooks”...
  • Page 469 MyFord Touch (If Equipped) in your one-eighth inch (three and one-half millimeter) RCA adapter into the two left A/V input jacks (red and white). Press the lower left corner of the touchscreen, then select A/V In. To use the auxiliary input jack feature, make sure that your portable music player is designed to be used with headphones and that it is fully charged.
  • Page 470: Phone Features

    Pairing Your Phone for the First Time WARNING: Driving while distracted can result in loss of vehicle control, accident and injury. Ford strongly recommends that drivers use extreme caution when using any device that may take their focus off the road. Your primary responsibility is the safe operation of the vehicle.
  • Page 471 MyFord Touch (If Equipped) The first thing you must do to use the phone features of SYNC is to pair your Bluetooth-enabled cellular phone with SYNC. This allows you to use your phone in a hands-free manner. 1. Touch Add Phone in the upper left corner of the touchscreen. 2.
  • Page 472 MyFord Touch (If Equipped) Receiving Calls During an incoming call, an audible tone sounds. Call information appears in the display if it is available. Accept the call by pressing Accept on the touchscreen or by pressing the phone button on your steering wheel control. Reject the call by pressing Reject on the touchscreen or by pressing and holding the phone button on your steering wheel control.
  • Page 473 MyFord Touch (If Equipped) When you select: You can: History Access any previously dialed, received or missed calls while your Bluetooth-enabled phone was connected to SYNC. You can also choose to save these to your Favorites or Quick Dial. This is a phone-dependent feature. If your phone does not support downloading call history using Bluetooth, SYNC keeps track of calls made with the SYNC system.
  • Page 474 MyFord Touch (If Equipped) Composing a Text Message Note: This is a speed-dependent feature and cannot be completed when the vehicle is traveling at speeds over 5 mph (8 km/h). Note: Downloading and sending text messages using Bluetooth are phone-dependent features. 1.
  • Page 475 MyFord Touch (If Equipped) When a new message arrives, an audible tone sounds and the screen displays a pop-up with the caller name and ID, if supported by your phone. You can press: • View to view the text message. •...
  • Page 476 MyFord Touch (If Equipped) If you select: You can: Internet Data Use this screen to make adjustments to your Connection internet data connection. Select to make your connection profile with the PAN (personal area network) or to turn off your connection. You can also choose to make adjustments to your settings or have the system always connect, never connect when roaming or...
  • Page 477: Information Menu

    MyFord Touch (If Equipped) “PHONE” “Forward text messages” “Unmute call” “Go to hands free” “Help” These commands are only available during an active call. If you have said “Messages”, see the following “Messages” chart. “MESSAGES” “Call” “Forward text messages” “Listen to text message <#>” “Listen to text messages”...
  • Page 478 For more information, see SYNC Services Terms and Conditions at www.SYNCMyRide.com. If you do not want Ford or its service providers to collect the vehicle travel information or other information identified in the Terms and Conditions, do not activate or use the service.
  • Page 479 MyFord Touch (If Equipped) 2. Once connected, follow the voice prompts to request your desired Service, such as “Traffic” or “Directions”. You can also say “What are my choices?” to receive a complete list of available services from which to choose. 3.
  • Page 480 MyFord Touch (If Equipped) Disconnecting from SYNC Services 1. Press and hold the phone button on the steering wheel. 2. Say “Goodbye” from the SYNC Services main menu. SYNC Services Quick Tips Personalizing You can personalize your Services feature to provide quicker access to your most used or favorite information.
  • Page 481 SIRIUS Travel Link. Note: Neither SIRIUS nor Ford is responsible for any errors or inaccuracies in the SIRIUS Travel Link services or its use in vehicles. SIRIUS Travel Link (if activated) can help you locate the best gas prices, find movie listings, get current traffic alerts, access the current weather map, get accurate ski conditions and scores to current sports games.
  • Page 482 MyFord Touch (If Equipped) Press the Information button and then select Travel Link, then choose from any of the following services: When you select: You can: Traffic On Route Identify traffic incidents on your route, nearby your vehicle’s current location or near any of Traffic Nearby your favorite places (if programmed).
  • Page 483 MyFord Touch (If Equipped) SIRIUS Travel Link Voice Commands Note: In order to use SIRIUS Travel Link, your vehicle must be equipped with navigation and your navigation SD card must be in the SD card slot. Press the voice button and when prompted, say any of the following: Travel Link Voice Commands “5–day weather forecast”...
  • Page 484 MyFord Touch (If Equipped) “TRAVEL LINK” “5–day weather “Golf schedule” “NBA scores” forecast” “Baseball headlines” “MLS headlines” “NFL headlines” “Baseball schedule” “MLS schedule” “NFL schedule” “Baseball scores” “MLS scores” “NFL scores” “College basketball “Motor sports” “NHL headlines” headlines” “College basketball “Motor sports order”...
  • Page 485 MyFord Touch (If Equipped) Calendar Press the Information button, then select Calendar. You can view the current calendar by day, week or month. 911 Assist (If Equipped) WARNING: Unless the 911 Assist setting is set on prior to a crash, the system will not dial for help which could delay response time, potentially increasing the risk of serious injury or death after a crash.
  • Page 486 MyFord Touch (If Equipped) • For information on airbag deployment, see the Supplementary Restraints System chapter. • For information on the fuel pump shut-off, see the Roadside Emergencies chapter. Setting 911 Assist On Press the Information button > Apps > 911 Assist, then select You can also access 911 Assist by: •...
  • Page 487 MyFord Touch (If Equipped) vehicle is able to talk with the operator. Be prepared to provide your name, phone number and location immediately, because not all 911 systems are capable of receiving this information electronically. 911 Assist May Not Work If •...
  • Page 488: Settings

    Certain versions or updates to Vehicle Health Report may also collect additional vehicle information. Ford may use the vehicle information it collects for any purpose. If you do not want to disclose your cellular phone number or vehicle information, do not run the feature or set up your Vehicle Health Report profile at www.SYNCMyRide.com.
  • Page 489 MyFord Touch (If Equipped) Clock Note: The date is set by your vehicle’s GPS; you cannot manually set the date. Note: If the battery has been disconnected, the vehicle needs to acquire a GPS signal to update the clock. Once your vehicle acquires the signal, it may take a few minutes for the update to display the correct time.
  • Page 490 MyFord Touch (If Equipped) To access, press the Settings icon > Display > Edit Wallpaper, then follow the system prompts to upload your photographs. Only the photograph(s) which meets the following conditions display: • Compatible file formats are as follows: .jpg, .gif, .png, .bmp. •...
  • Page 491 MyFord Touch (If Equipped) Vehicle Health Report (If Equipped) Turn Automatic Reminders on and off and set the mileage interval at which you would like to receive the reports. Press the ? for more information on these selections. When done making your selections, press Run Vehicle Health Report Now if you want your report.
  • Page 492 MyFord Touch (If Equipped) System Press the Settings icon > Settings > System, then select from the following: System Language Select to have the touchscreen display in English, Spanish or French. Distance Select to display units in kilometers or miles. Temperature Select to display units in Celsius or Fahrenheit.
  • Page 493 MyFord Touch (If Equipped) Voice Control Press the Settings icon > Settings > Voice Control, then select from the following: Voice Control Interaction Mode Standard interaction mode provides more detailed interaction and guidance. Advanced mode has less audible interaction and more tone prompts.
  • Page 494 MyFord Touch (If Equipped) Media Player Press the Settings icon > Settings > Media Player, then select from the following: Media Player Autoplay With this feature on, the system automatically switches to the media source upon initial connection and you can listen to music which has already been randomly indexed during the indexing process.
  • Page 495 MyFord Touch (If Equipped) Navigation Press the Settings icon > Settings > Navigation, then select from the following: Navigation Map Preferences Turn breadcrumbs on and off. Have the system display your turn list top to bottom or bottom to top. Turn the Parking POI notification on and off.
  • Page 496 MyFord Touch (If Equipped) Phone Settings Press the Settings icon > Settings > Phone, then select from the following: Phone Bluetooth Devices Connect, disconnect, add or delete a device, as well as save it as a favorite. Bluetooth Turn Bluetooth on and off. Do Not Disturb Have all calls go directly to your voice mail and not ring inside the vehicle.
  • Page 497 MyFord Touch (If Equipped) Wireless & Internet Your system has a Wi-Fi feature which creates a wireless network within your vehicle, thereby allowing other devices (i.e., personal computers or phones) in your vehicle to speak to each other, share files, play games, etc.
  • Page 498 MyFord Touch (If Equipped) Wireless & Internet USB Mobile Instead of using Wi-Fi, your system can also Broadband use a USB mobile broadband connection to access the internet. (You must activate your mobile broadband device on your PC prior to connecting it to the system.) This screen allows you to set up what is your typical area for your USB mobile broadband connection.
  • Page 499 MyFord Touch (If Equipped) Help Press the Settings icon > Help, then select from the following: Help Where Am I? View the vehicle’s current location, if your vehicle is equipped with navigation. If your vehicle is not equipped with navigation, nothing is displayed.
  • Page 500: Climate Features

    MyFord Touch (If Equipped) CLIMATE CONTROLS Depending on your vehicle line and option package, your climate screen may look different than what is shown here. A. Power: Touch to turn the system on and off. Outside air cannot enter the vehicle when the system is off. B.
  • Page 501 MyFord Touch (If Equipped) F. A/C: Touch to turn the air conditioning on or off. • Use with recirculated air to improve cooling performance and efficiency. • Engages automatically in MAX A/C, defrost and floor/defrost. G. AUTO: Touch to engage automatic operation, then set the temperature using the temperature control.
  • Page 502 MyFord Touch (If Equipped) Climate Control Voice Commands The following voice commands are available at the main menu level of a voice session. For example, press the voice button and after the prompt, “Say a command”; say any of the following commands: Climate Control Voice Commands “Climate automatic”...
  • Page 503: Navigation System

    MyFord Touch (If Equipped) Additional Climate Control Voice Commands “On” “Windshield floor on” “Help” If you have said “Temperature”, you can say any of the commands in the following “Temperature” chart. “TEMPERATURE” “High” “Low” “<15.5–29.5> degrees” “<60–85> degrees” “Help” NAVIGATION SYSTEM (IF EQUIPPED) Note: The navigation SD card must be in the SD card slot to operate the navigation system.
  • Page 504 MyFord Touch (If Equipped) Destination Selections Emergency Edit Route Cancel Route Previous Starting Point Freeway Entrance/Exit Latitude/Longitude 1. Enter the necessary information into the highlighted text fields (in any order). For address destination entry, the Go! button appears once all the necessary information has been entered. Pressing the Go! button makes the address location appear on the map.
  • Page 505 MyFord Touch (If Equipped) POI Categories Your system offers a variety if POI (Points of Interest) categories. Main Categories Food/Drink & Dining Automotive Travel & Transportation Shopping Financial Entertainment & Arts Emergency Recreation & Sports Community Government Health & Medicine Domestic Services Within these main categories, there are subcategories which contain more listings:...
  • Page 506 MyFord Touch (If Equipped) cityseekr is a service which provides additional information about certain POIs, such as restaurants, hotels and attractions. When you have selected a POI, the location and information appear, such as address and phone number. If the POI is listed with cityseekr, you also see information, such as a brief description, check-in and check-out times, when the restaurant is open, etc.
  • Page 507 MyFord Touch (If Equipped) When you are viewing additional information for hotels, cityseekr also tells you if the hotel has certain services and facilities using icons: Hotel Services and Facilities Restaurant 24 Hr Room Service Business Center Fitness Center Handicap Facilities Internet Access Laundry Pool...
  • Page 508 MyFord Touch (If Equipped) When you select: You can: Map Preferences Turn breadcrumbs on and off. Have the system display your turn list top to bottom or bottom to top. Set the automatic parking POI notification. When parking POI notification is on, parking POI icons display on the map when you get close to your destination.
  • Page 509 MyFord Touch (If Equipped) When you select: You can: Traffic Preferences Choose how you want the system to handle traffic problems along your route. Automatic: Have the system reroute you to avoid traffic incidents that develop and impact the current route (no notification is provided).
  • Page 510 MyFord Touch (If Equipped) Change the appearance of the map display by repeatedly pressing the arrow button in the upper left corner of the screen. It toggles between three different map modes; Heading up, North up, and 3D. Heading up (2D map) always shows the direction of forward travel to be upward on the screen.
  • Page 511 MyFord Touch (If Equipped) Scroll cursor allows you to scroll the map; the icon is fixed in the center of the screen. The map position closest to the cursor is in a window on the top center part of the screen. Address book entry default icon(s) indicates the location on the map of an address book entry.
  • Page 512 MyFord Touch (If Equipped) Quick-touch Buttons When in map mode, touch anywhere on the map display to access the following options: When you select: You can: Set as Dest Select a scrolled location on the map as your destination. (You may scroll the map by pressing your index finger on the map display.
  • Page 513 Annual navigation map updates are available for purchase through your dealership, by calling 1-800-NAVMAPS (in Mexico, call 01–800–557–5539) or going to www.navigation.com/ford. You need to specify the make and model of your vehicle to determine if there is an update available.
  • Page 514 MyFord Touch (If Equipped) If you have said the command, “Navigation”, you may say any of the above commands or commands in the following Navigation chart. “DESTINATION” “<nametag>” “<POI category>” “Favorites” “Home” “Intersection” “Nearest <POI category>” “Nearest POI” “Play nametags” “POI category”...
  • Page 515 MyFord Touch (If Equipped) One-shot Destination Street Address If your vehicle is equipped with the SD card navigation feature, you have the ability to enter in a street address using a feature called one-shot destination street address. When you say either “Navigation destination street address”...
  • Page 516: Appendices

    SYNC End User License Agreement (EULA) • You have acquired a device (“DEVICE”) that includes software licensed by FORD MOTOR COMPANY from an affiliate of Microsoft Corporation (“MS”). Those installed software products of MS origin, as well as associated media, printed materials, and “online” or electronic documentation (“MS SOFTWARE”) are protected by international...
  • Page 517 Neither FORD MOTOR COMPANY nor its suppliers shall be liable for any damages arising out of errors in the speech recognition process.
  • Page 518 SOFTWARE after the date you obtain your initial copy of the SOFTWARE (“Supplemental Components”). If FORD MOTOR COMPANY or third party software and services suppliers provide or make available to you Supplemental Components and no other EULA terms are provided along with the Supplemental Components, then the terms of this EULA shall apply.
  • Page 519 DEVICE. UPGRADES AND RECOVERY MEDIA: If the SOFTWARE is provided by FORD MOTOR COMPANY separate from the DEVICE on media such as a ROM chip, CD ROM disk(s) or via web download or other means, and is labeled “For Upgrade Purposes Only” or For Recovery Purposes...
  • Page 520 For additional information, see http://www.microsoft.com/exporting/. TRADEMARKS: This EULA does not grant you any rights in connection with any trademarks or service marks of FORD MOTOR COMPANY, MS, Microsoft Corporation, third party software or service providers, their affiliates or suppliers.
  • Page 521 End user notice Microsoft Windows Mobile for Automotive Important Safety Information This system Ford SYNC™ contains software that is licensed to Manufacturer FORD MOTOR COMPANY by an affiliate of Microsoft Corporation pursuant to a license agreement. Any removal, reproduction, reverse engineering or other unauthorized use of the software from this system in violation of the license agreement is strictly prohibited and may subject you to legal action.
  • Page 522 Appendices attempting to access a function of the system requiring prolonged attention. Even occasional short scans to the screen may be hazardous if your attention has been diverted away from your driving task at a critical time. Volume Setting Do not raise the volume excessively. Keep the volume at a level where you can still hear outside traffic and emergency signals while driving.
  • Page 523 Appendices Potential Map Inaccuracy Maps used by this system may be inaccurate because of changes in roads, traffic controls or driving conditions. Always use good judgment and common sense when following the suggested routes. Emergency Services Do not rely on any navigation features included in the system to route you to emergency services.
  • Page 524 Appendices You agree to indemnify and hold TeleNav harmless against all claims resulting from any dangerous or otherwise inappropriate use of the TeleNav Software in any moving vehicle, including as a result of your failure to comply with the directions above. 2.
  • Page 525 Appendices 4. Disclaimers To the fullest extent permissible pursuant to applicable law, in no event will TeleNav, its licensors and suppliers, or agents or employees of any of the foregoing, be liable for any decision made or action taken by you or anyone else in reliance on the information provided by the TeleNav Software.
  • Page 526 Appendices SHALL BE LIMITED TO THE AMOUNT ACTUALLY PAID BY YOU FOR THE TELENAV SOFTWARE. SOME STATES AND/OR JURISDICTIONS DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATIONS OR EXCLUSIONS MAY NOT APPLY TO YOU. 6.
  • Page 527 Appendices Software, including without limitation all related intellectual property rights. No licenses or other rights which are not expressly granted in this Agreement are intended to, or shall be, granted or conferred by implication, statute, inducement, estoppel or otherwise, and TeleNav and its suppliers and licensors hereby reserve all of their respective rights other than the licenses explicitly granted in this Agreement.
  • Page 528 Appendices be bound by the terms of this agreement. If you do not agree to the terms of this agreement, you are not permitted to install, copy, use, resell or transfer the Data. If you wish to reject the terms of this agreement, and have not installed, copied, or used the Data, you must contact your retailer or NAVTEQ North America, LLC (“NT”) within thirty (30) days of purchase for a refund of your purchase price.
  • Page 529 Appendices original media (e.g., the CD-ROM or DVD you purchased), all original packaging, all Manuals and other documentation. Specifically, Multi-disc sets may only be transferred or sold as a complete set as provided to you and not as a subset thereof. Additional License Limitations: Except where you have been specifically licensed to do so by NT in a separate written agreement, and without limiting the preceding paragraph, your license is conditioned on...
  • Page 530 Appendices DATA; OR FOR ANY LOSS OF PROFIT, REVENUE, CONTRACTS OR SAVINGS, OR ANY OTHER DIRECT, INDIRECT, INCIDENTAL, SPECIAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF YOUR USE OF OR INABILITY TO USE THIS DATA, ANY DEFECT IN THIS DATA, OR THE BREACH OF THESE TERMS OR CONDITIONS, WHETHER IN AN ACTION IN CONTRACT OR TORT OR BASED ON A WARRANTY, EVEN IF NT OR ITS LICENSORS HAVE BEEN ADVISED OF THE...
  • Page 531 Appendices furnished shall be marked and embedded as appropriate with the following “Notice of Use”, and be treated in accordance with such Notice: NOTICE OF USE CONTRACTOR (MANUFACTURER/ SUPPLIER) NAME: NAVTEQ CONTRACTOR (MANUFACTURER/SUPPLIER) ADDRESS: 425 West Randolph Street, Chicago, IL 60606. This Data is a commercial item as defined in FAR 2.101 and is subject to the EndUser License Agreement under which this Data was provided.
  • Page 532 Appendices perform other functions. You may use Gracenote Data only by means of the intended End User functions of this device This device may contain content belonging to Gracenote’s providers. If so, all of the restrictions set forth herein with respect to Gracenote Data shall also apply to such content and such content providers shall be entitled to all of the benefits and protections set forth herein that are available to Gracenote.
  • Page 533 Appendices CONTENT FROM THE COMPANIES’ RESPECTIVE SERVERS OR, IN THE CASE OF GRACENOTE, CHANGE DATA CATEGORIES FOR ANY CAUSE THAT GRACENOTE DEEMS SUFFICIENT. NO WARRANTY IS MADE THAT EITHER GRACENOTE CONTENT OR THE GRACENOTE SOFTWARE OR GRACENOTE SERVERS ARE ERROR-FREE OR THAT THE FUNCTIONING OF THE GRACENOTE SOFTWARE OR GRACENOTE SERVERS WILL BE UNINTERRUPTED.
  • Page 534: Index

    Index 911 Assist™ ......409, 485 All Wheel Drive (AWD), driving off road ......200 Ambient mood/lighting ..490–491 AM/FM ........450 ABS (see Brakes) .....207 Antifreeze Accessing and using your USB (see Engine coolant) ....292 port ..........463 Anti-lock brake system Accessing call history/phone (see Brakes) ......207 book during active call .....399 Anti-theft system ....76, 79...
  • Page 535 CD voice commands ....463 Cupholder(s) ......168 Cell phone use ......15 Customer Assistance ....262 Changing a tire ......344 Ford Extended Child safety restraints ..28, 30 Service Plan ....371, 373 Child safety seats Getting assistance outside the attaching with tether straps ..30 U.S.
  • Page 536 Index Engine oil checking and adding ....291 Defrost ....145–146, 148, 150 dipstick ........291 rear window ......153 filter, specifications ....365 refill capacities ......361 Dipstick specifications ......361 automatic transmission fluid ..........297 Event data recording ....12 engine oil .........291 Exhaust fumes ......183 Display settings ......489 Driving under special conditions ....199, 202, 204 Fail safe cooling ......295...
  • Page 537 Index Fuel - flex fuel vehicle Inspection/maintenance (I/M) (FFV) .........185–186 testing ........193 Fuses ........276–277 Instrument panel cleaning ........318 cluster ........103 Intelligent Access Key ....58 Garage door opener ....170 Gas cap (see Fuel cap) ....189 Gauges .......102–103 Jack ..........344 odometer .........113 trip odometer ......113 positioning .......344 storage ........344...
  • Page 538 Index Locks Notifications ......484 autolock ........70 childproof ........32 doors ..........68 Octane rating ......187 Lubricant specifications ...361 Lug nuts ........358 Pairing other phones ..397, 471 Pairing your phone ....470 Making and receiving calls ..471 Pairing your phone for the first MAP DVD - Loading and time ........396, 470 Unloading ........471 Parental MyKey programming ...64...
  • Page 539 Index fluid, refill capacity ....361 fluid, specifications ....361 Safety Belt Maintenance ....41 Power Windows ......95 Privacy information ..393, 441 Safety belts (see Safety restraints) ..35, 38 Push button start system ..180 Putting a call on/off hold ..399 Safety defects, reporting ..275 Safety information ....392, 439 Safety restraints ....35–36, 38 Quick touch buttons ....512...
  • Page 540 Index SecuriCode keyless entry Supported media file types ..467 system ..........72 Supported player, media SecuriLock passive anti-theft formats and metadata system ..........76 information ........467 Selecting your media source SYNC customer (USB, Line in, BT audio) ..421 support ......392, 439 Sending new text messages ..474 SYNC Services ....414, 477 Setting a destination ....503 System settings ......492...
  • Page 541 Index recreational towing ....256 trailer towing ......251 Vehicle health report ..412, 487 wrecker ........255 Vehicle Identification Number Traction control ......209 (VIN) ..........365 Traffic, Directions and Vehicle loading ......243 Information ........414 Ventilating your vehicle ...183 Traffic preferences ....507 Voice commands in media Transaxle mode ..........419 fluid, refill capacities ....361...

Table of Contents