Memory Function - Ford Taurus2017 Owner's Manual

MEMORY FUNCTION

WARNINGS
Before activating the memory seat,
make sure that the area immediately
surrounding the seat is clear of
obstructions and that all occupants are
clear of moving parts.
Do not use the memory function
when your vehicle is moving.
This function automatically recalls the
position of these features.
• Driver seat.
• Power mirrors.
• Optional power adjustable pedals.
• Optional power steering column.
The memory control is on the side seat
panel.
E211293
A Type 1
B Type 2
Saving a Preset Position
1. Switch the ignition on.
2. Adjust the features to your desired
positions.
3. Press and hold the desired preset
button until you hear a single tone.
Taurus (CPH) Canada/United States of America, enUSA, First Printing
Seats
You can save up to two preset memory
(If Equipped)
positions. You can save a memory preset
at any time.
Recalling a Preset Position
Press and release the desired memory
preset button to recall a saved memory
position.
Note: You can recall a programmed
memory position:
•
•
You can also recall a preset memory
position by:
•
•
•
Note: When the ignition is off, a linked fob
used to recall your memory position moves
the seat and steering column to the Easy
Entry position if you enable the Easy Entry
and Exit feature in the information display.
Note: During a memory recall, pressing any
seat, steering column, mirror or memory
button cancels the operation.
Linking a Preset Position to Your
Remote Control or Intelligent Access
Key
You can save the preset memory positions
for up to three remote controls or
intelligent access (IA) keys.
1.
125
In any gearshift position if you have
switched the ignition off.
Only in park (P) or neutral (N) if you
have switched the ignition on.
Pressing the unlock button on your
intelligent access key fob if it is linked
to a preset position.
Unlocking the intelligent driver door
handle if a linked key fob is present.
Entering a personal entry code on the
Securicode keypad. See Doors and
Locks (page 57).
With the ignition on, move the memory
positions to the desired positions.