Analog Led (Ref 20); Analog/Digital Remote Switch (Ref 21); Digital Led (Ref 22); Busy Led (Ref 23) - TDK-Lambda PHV Series Operator's Manual

5.1.20. Analog LED (Ref 20)

Indicates that a supply equipped with both remote analog and digital interfaces is operating
in remote control mode via the Analog interface.

5.1.21. Analog/Digital Remote Switch (Ref 21)

Toggles the control mode of a supply equipped with both remote analog and digital
interfaces between the remote Analog or Digital interface.

5.1.22. Digital LED (Ref 22)

Indicates that a supply equipped with both remote analog and digital interfaces is operating
in remote control mode via the Digital interface.

5.1.23. Busy LED (Ref 23)

Indicates presence of traffic on the optional Digital interface.
5.2.

Rear Panel Layout

All of the interconnect and HV connections for the PHV supply are located on the power
supply rear panel.
Figure 2 shows the typical rear panel layout for the PHV half rack version with floating return,
with the location of the various connectors. Figure 3 shows the rear panel with the optional
Reversible output polarity.
1

Figure 2. PHV Half Rack Rear Panel Connections (140Watt model with floating return shown)

2
5
83550001 Revision C
3
6
20
4
7