To Set Cruising Speed; To Change Cruising Speed; Cruise Control (If Equipped) - Suzuki GRAND VITARA 2008 Owner's Manual

Hide thumbs Also See for GRAND VITARA 2008:
Table of Contents

Advertisement

OPERATING YOUR VEHICLE

Cruise Control (if equipped)

The cruise control system allows you to
maintain a steady speed without keeping
your foot on the accelerator pedal. The
controls for operating the cruise control
system are on the steering wheel. You can
use the cruise control system at speeds of
about 40 km/h (25 mph) or higher.
WARNING
To help avoid loss of vehicle control,
do not use the cruise control system
when driving in heavy traffic, on slip-
pery or winding roads, or on steep
downgrades.
3-29
When you push the "ON/OFF" switch, the
system is on and a "CRUISE" indicator
light on the instrument cluster will be on.
79K032
When the vehicle's speed is controlled by
the cruise control system, a "SET" indica-
tor light on the instrument cluster will be
on.
(2)
52D113
(1)

To Set Cruising Speed

Turn on the cruise control system by push-
ing the "ON/OFF" switch (1). Accelerate to
the desired speed and push the "SET/
65D474
COAST" switch (3). Take your foot off the
accelerator pedal and the set speed will be
maintained.
With the cruise control on, you can
increase speed for passing by using the
accelerator pedal. When you take your foot
off the pedal, your vehicle will return to the
set speed.

To Change Cruising Speed

To reset the cruise control to a slower
speed, hold in the "SET/COAST" switch (3)
until the vehicle has slowed to the desired
speed, then release the switch. The new
speed will be maintained.
(4)
(3)
79K049
78KS0-37E

Advertisement

Table of Contents
loading

Table of Contents